What is this mysterious warning?

Tango589 · 09-14-13, 04:04 PM

I'm trying to run SH3+GWX3.0+h.sie V16B1. Everything went swimmingly up until today, but now my laptop hangs at the 'Not so long ago...' screen. When I open the task manager I can see the SilentHunter tab is available, but so is a mysterious 'Warning' tab from SH3. I can't see what this warning says as my laptop stops wanting to play ball. Can anyone shed some light on it?

Tango589 · 09-14-13, 04:29 PM

I've now managed to see what the warning says: Menu ID not found:0xf800001!

Then I close it and another warning appears: Meu ID not found: 0x26ac00ff!

Then another: Menu ID not found: 0x26ac0001!

These keep appearing with different ID's until I close SH3 via Task Manager. Has anything vital broken?

Cheers

Tango589 · 09-14-13, 05:32 PM

Update 2: I plugged the flash drive with SH3 into my wifes' laptop and AVG said there was a virus under F:Ubisoft/Silenthunter hich was cleaned off. This may have something to do with it...

The plot thickens!

diesel97 · 09-14-13, 06:24 PM

Your A/V software has picked up the mdofied sh3 .exe as a false positive virus signature - try making a virus-scan exception in your A/V software if you have that option.

All the best.

Tango589 · 09-14-13, 06:58 PM

Cheers for the advice diesel97. My work laptop that I use at home for subsimming has never had a problem with the modified files, but that could be because it's using McAfee(!).

My sh3.exe file has now vanished, so I've pasted in a copy of the .exe patched to GWX3 from the installation I've got runnning for WSM 3. I'll have to re-patch it to v1.6B1 and see how it goes from there.
Wish me luck!

sublynx · 09-15-13, 12:24 AM

Menu ID not found: 0x26ac0001?

I get these kind of messages when there is a problem in menu_1024_768.ini file. GWX changes that file, but as far as I can remember H.sie's mod does not.

However I do think that the problem might be the virus detection software and you should first try diesel97's solution.

If that does not solve the problem, you might want to check your mod list. Many mods change menu_1024_768.ini file and that file is tricky modwise. Check for any mods that change the menu file.

Tango589 · 09-15-13, 07:55 AM

Aww, nuts to the whole thing. I don't know enough about the strange and mysterious was of computers to rifle through mods looking for conflicts, so I'm just going to ditch the lot and have a fresh install, checking after every mod is activated.

Cheers for the advice, you guys rock!

Tango589 · 09-15-13, 08:07 AM

As a thought, I remembeed that during a period of nosy tinkering I changed the my documents\SH3\data\cfg\main.cfg DynamicShadows:No to Yes, but I fogot to change it in the main .cfg file for the game. I'm wonderng if this is the cause of my frustration? Here's trying to put it back!

09-15-13, 10:06 AM

Dynamic Shadows were removed from SH3 with the very first patch.
Setting it to yes should have no effect at all as it's ignored.

Tango589 · 09-15-13, 11:00 AM

Oh well, it was just a thought.

badwolf · 09-15-13, 11:39 AM

Menu ID 0x26ac00ff is the 0x26 = Page attack periscope. So most likely the menu_1024_768.ini has a 0x26ac00ff entry and looked in Dials.cfg for it, but another mod or something has replaced the Dial.cfg without 0x26ac00ff in it. So can't be found.

Open up your menu_1024_768.ini in notebook and use edit to find 0x26ac00ff. Then if you find it, paste the section into this chat so we can look at it.

But it seems to me, with having multiple ID errors, that you have put in a mod that's replaced the menu_1024_768.ini but has omitted from installing the rest of the mod, so a lot of new entries can't be found.

badwolf · 09-15-13, 12:10 PM

Here's an example of what I mean:-

Entry in menu_1024_768.ini

[G26 I88]
Name=AOB dial
Type=1031;Stat bmp array
ItemID=0x260E0002
ParentID=0x260E0000
Pos=17,-14,154,144
Materials=1
Display=2;Linear
Mat 0=data/menu/gui/Periscope.tga
Crop 0=0.606445,0.750977,0.150391,0.140625
MatFlags=0x21
TexFmt=0x9
Drag=false
BmpState=1
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

Now it will look for the 0x260E0002

Here it is in Dials.cfg

[Dial37]
Name=PerAngleOnBow
Type=42; DIAL_TGT_ANG_ON_BOW
Cmd=Set_tgt_sel_value
Dial=0x260E0002
CrtVal=0x260E0001
NewVal=0x0
DialVal=-180,180
RealVal=-180,180; degrees
Circular=Yes
CmdOnDrag=Yes

If this entry in Dials.cfg is missing or has a different ItemID due to another mod, you get the message - Menu ID not found:0x260E0002!

Tango589 · 09-15-13, 12:35 PM

Unfortunately, none of the menu ID's are locatable in menu_1024_768.ini, so I'm at a bit of a loss as to what I need to do now.

Also, there were far more than the 3 missing ID's I gave above. As fast as I could close the message box anothe would appear, so I gave up after about 20 dialog boxes. I will list my mods to see if that can shed any light on the matter.

Tango589 · 09-15-13, 12:49 PM

mods.jpg

Here's my mods list. I've just noticed the 'no patrol log' mod is active, so I'll knock that on the head and see what the effect is.

BigWalleye · 09-15-13, 02:03 PM

Where did you find the "No patrol log for GWX" mod? I couldn't find it on a google search or a search of the SubSim downloads pages. Is it perhaps an old mod compatible with an older version of GWX?

I'd suggest you check the !BACKUP folder to see what the last mod was to overwrite menu_1024_768.ini and dials.cfg. I suspect you will find that these two files were overwritten last by two different mods. This should tell you which mod to remove. You may be able to fix the problem by changing the mod activation order, or you may need to WinMerge the two Menu_1024_768.ini files.

09-14-13, 04:04 PM	#1
Tango589 Still crazy as ever! Join Date: Jan 2008 Location: A little south of sanity Posts: 3,375 Downloads: 180 Uploads: 1	What is this mysterious warning? I'm trying to run SH3+GWX3.0+h.sie V16B1. Everything went swimmingly up until today, but now my laptop hangs at the 'Not so long ago...' screen. When I open the task manager I can see the SilentHunter tab is available, but so is a mysterious 'Warning' tab from SH3. I can't see what this warning says as my laptop stops wanting to play ball. Can anyone shed some light on it? __________________ Hanging on in quiet desperation is the English way...

09-14-13, 04:29 PM	#2
Tango589 Still crazy as ever! Join Date: Jan 2008 Location: A little south of sanity Posts: 3,375 Downloads: 180 Uploads: 1	I've now managed to see what the warning says: Menu ID not found:0xf800001! Then I close it and another warning appears: Meu ID not found: 0x26ac00ff! Then another: Menu ID not found: 0x26ac0001! These keep appearing with different ID's until I close SH3 via Task Manager. Has anything vital broken? Cheers __________________ Hanging on in quiet desperation is the English way...

09-14-13, 05:32 PM	#3
Tango589 Still crazy as ever! Join Date: Jan 2008 Location: A little south of sanity Posts: 3,375 Downloads: 180 Uploads: 1	Update 2: I plugged the flash drive with SH3 into my wifes' laptop and AVG said there was a virus under F:Ubisoft/Silenthunter hich was cleaned off. This may have something to do with it... The plot thickens! __________________ Hanging on in quiet desperation is the English way...

09-14-13, 06:24 PM	#4
diesel97 Sailor man Join Date: Apr 2005 Posts: 44 Downloads: 327 Uploads: 0	Your A/V software has picked up the mdofied sh3 .exe as a false positive virus signature - try making a virus-scan exception in your A/V software if you have that option. All the best. __________________

09-14-13, 06:58 PM	#5
Tango589 Still crazy as ever! Join Date: Jan 2008 Location: A little south of sanity Posts: 3,375 Downloads: 180 Uploads: 1	Cheers for the advice diesel97. My work laptop that I use at home for subsimming has never had a problem with the modified files, but that could be because it's using McAfee(!). My sh3.exe file has now vanished, so I've pasted in a copy of the .exe patched to GWX3 from the installation I've got runnning for WSM 3. I'll have to re-patch it to v1.6B1 and see how it goes from there. Wish me luck! __________________ Hanging on in quiet desperation is the English way...

09-15-13, 12:24 AM	#6
sublynx Sea Lord Join Date: Mar 2011 Location: In the conning tower of my VIIC scanning the sea through the periscope Posts: 1,698 Downloads: 173 Uploads: 7	Menu ID not found: 0x26ac0001? I get these kind of messages when there is a problem in menu_1024_768.ini file. GWX changes that file, but as far as I can remember H.sie's mod does not. However I do think that the problem might be the virus detection software and you should first try diesel97's solution. If that does not solve the problem, you might want to check your mod list. Many mods change menu_1024_768.ini file and that file is tricky modwise. Check for any mods that change the menu file.

09-15-13, 07:55 AM	#7
Tango589 Still crazy as ever! Join Date: Jan 2008 Location: A little south of sanity Posts: 3,375 Downloads: 180 Uploads: 1	Aww, nuts to the whole thing. I don't know enough about the strange and mysterious was of computers to rifle through mods looking for conflicts, so I'm just going to ditch the lot and have a fresh install, checking after every mod is activated. Cheers for the advice, you guys rock! __________________ Hanging on in quiet desperation is the English way...

09-15-13, 08:07 AM	#8
Tango589 Still crazy as ever! Join Date: Jan 2008 Location: A little south of sanity Posts: 3,375 Downloads: 180 Uploads: 1	As a thought, I remembeed that during a period of nosy tinkering I changed the my documents\SH3\data\cfg\main.cfg DynamicShadows:No to Yes, but I fogot to change it in the main .cfg file for the game. I'm wonderng if this is the cause of my frustration? Here's trying to put it back! __________________ Hanging on in quiet desperation is the English way...

09-15-13, 10:06 AM	#9
Madox58 Stowaway Posts: n/a Downloads: Uploads:	Dynamic Shadows were removed from SH3 with the very first patch. Setting it to yes should have no effect at all as it's ignored.

09-15-13, 11:00 AM	#10
Tango589 Still crazy as ever! Join Date: Jan 2008 Location: A little south of sanity Posts: 3,375 Downloads: 180 Uploads: 1	Oh well, it was just a thought. __________________ Hanging on in quiet desperation is the English way...

09-15-13, 11:39 AM	#11
badwolf XO Join Date: Jun 2008 Posts: 427 Downloads: 59 Uploads: 0	Menu ID 0x26ac00ff is the 0x26 = Page attack periscope. So most likely the menu_1024_768.ini has a 0x26ac00ff entry and looked in Dials.cfg for it, but another mod or something has replaced the Dial.cfg without 0x26ac00ff in it. So can't be found. Open up your menu_1024_768.ini in notebook and use edit to find 0x26ac00ff. Then if you find it, paste the section into this chat so we can look at it. But it seems to me, with having multiple ID errors, that you have put in a mod that's replaced the menu_1024_768.ini but has omitted from installing the rest of the mod, so a lot of new entries can't be found. Last edited by badwolf; 09-15-13 at 12:31 PM.

09-15-13, 12:10 PM	#12
badwolf XO Join Date: Jun 2008 Posts: 427 Downloads: 59 Uploads: 0	Here's an example of what I mean:- Entry in menu_1024_768.ini [G26 I88] Name=AOB dial Type=1031;Stat bmp array ItemID=0x260E0002 ParentID=0x260E0000 Pos=17,-14,154,144 Materials=1 Display=2;Linear Mat 0=data/menu/gui/Periscope.tga Crop 0=0.606445,0.750977,0.150391,0.140625 MatFlags=0x21 TexFmt=0x9 Drag=false BmpState=1 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF Now it will look for the 0x260E0002 Here it is in Dials.cfg [Dial37] Name=PerAngleOnBow Type=42; DIAL_TGT_ANG_ON_BOW Cmd=Set_tgt_sel_value Dial=0x260E0002 CrtVal=0x260E0001 NewVal=0x0 DialVal=-180,180 RealVal=-180,180; degrees Circular=Yes CmdOnDrag=Yes If this entry in Dials.cfg is missing or has a different ItemID due to another mod, you get the message - Menu ID not found:0x260E0002!

09-15-13, 12:35 PM	#13
Tango589 Still crazy as ever! Join Date: Jan 2008 Location: A little south of sanity Posts: 3,375 Downloads: 180 Uploads: 1	Unfortunately, none of the menu ID's are locatable in menu_1024_768.ini, so I'm at a bit of a loss as to what I need to do now. Also, there were far more than the 3 missing ID's I gave above. As fast as I could close the message box anothe would appear, so I gave up after about 20 dialog boxes. I will list my mods to see if that can shed any light on the matter. __________________ Hanging on in quiet desperation is the English way...

09-15-13, 12:49 PM	#14
Tango589 Still crazy as ever! Join Date: Jan 2008 Location: A little south of sanity Posts: 3,375 Downloads: 180 Uploads: 1	mods.jpg Here's my mods list. I've just noticed the 'no patrol log' mod is active, so I'll knock that on the head and see what the effect is. __________________ Hanging on in quiet desperation is the English way...

09-15-13, 02:03 PM	#15
BigWalleye Sea Lord Join Date: Jul 2012 Location: On the Eye-lond, mon! Posts: 1,987 Downloads: 465 Uploads: 0	Where did you find the "No patrol log for GWX" mod? I couldn't find it on a google search or a search of the SubSim downloads pages. Is it perhaps an old mod compatible with an older version of GWX? I'd suggest you check the !BACKUP folder to see what the last mod was to overwrite menu_1024_768.ini and dials.cfg. I suspect you will find that these two files were overwritten last by two different mods. This should tell you which mod to remove. You may be able to fix the problem by changing the mod activation order, or you may need to WinMerge the two Menu_1024_768.ini files.