no trackers appear

darksythe · 09-16-05, 07:59 AM

Just having a problem with the DEMON equipment onboard the Seawolf in campaign mission 2 i cant get any of my contacts to appear in the DEMON Display. Tried loading it twice first time just the one of my contacts wouldnt display now none of 3 that i have will

darksythe · 09-16-05, 08:04 AM

just saved and restarted now only 1 appears any ideas?

Dr.Sid · 09-16-05, 08:17 AM

Ususaly you have to MANUALY assign tracker and right after that go to DEMON. It is somehow buggy. Also the contact must be strong enough.

Molon Labe · 09-16-05, 08:39 AM

I've never observed any bugginess in the Seawolf DEMON. Are you sure you're assigning the tracker in broadband?

darksythe · 09-16-05, 08:44 AM

no i had them assigned in narrowband but i have now gone back to sign them in BB and all is well thanks for help

Jamie · 09-16-05, 09:16 AM

From the DW manual... For anyone who is interested:

Using DEMON to Calculate a Contactâ€™s Speed

1. First determine the class of the contact in the Narrowband, ESM or the Stadimeter Station. In the USNI Browser, find the entry for the ship or subâ€™s class and make note of the turns per knot number listed in the TPK field.

2. Ensure that there is a tracker assigned to the desired contact in Broadband sonar.

3. Click SELECT ARRAY. A panel containing array buttons appears. Select the TOWED or SPHERE array. The selected button is green. Click BACK.

4. Click TRACKER REVIEW until the Contact ID and tracker letter for the contact you want to analyze appear in the DEMON Data Display. Lines appear in the DEMON Waterfall Display
Note: If the game is paused, no lines appear in the waterfall display.

5. If necessary, adjust the frequency to better view the signal. If the lines in the display seem to blur together, switch to a lower frequency range. If the lines run off the right edge of the display, increase the frequency range.
To adjust the frequency range, click FREQUENCY SCALE in the button matrix. A panel with frequency options appears. Click the desired scale. Click BACK.

6. Click above the line farthest left in the Waterfall display to select it. A vertical line above the contact indicates the line is selected.

7. Click TURNS PER KNOT in the button matrix.

8. In the panel that appears, click either INCREASE T.P.K. or DECREASE T.P.K. as necessary to set the desired TPK value. The TPK value entered is seen in the Data Display in the Turns Per Knot field. The speed for the designated TPK is displayed in the Speed field in the Data Display.

9. When you have determined the speed of the contact, enter that speed in the TMA SPEED field for the selected contact on the TMA Station.

Molon Labe · 09-16-05, 09:37 AM

Note to Akula drivers:

Assigning a tracker in Broadband is a necessary, but not always sufficient, condition for getting DEMON data. Unlike the American subs, you cannot get DEMON data from a contact tracked in broadband that was first assigned a tracker in narrowband.

In some cases, removing the narrowband tracker, and then assigning the broadband tracker, will allow DEMON data. In most cases, however, you will need to drop the contact and then assign the broadband tracker in order for DEMON data to appear.

09-16-05, 07:59 AM	#1
darksythe Lieutenant Join Date: Sep 2005 Posts: 269 Downloads: 4 Uploads: 0	no trackers appear Just having a problem with the DEMON equipment onboard the Seawolf in campaign mission 2 i cant get any of my contacts to appear in the DEMON Display. Tried loading it twice first time just the one of my contacts wouldnt display now none of 3 that i have will

09-16-05, 09:16 AM	#6
Jamie Sonalysts Inc. Join Date: Jul 2002 Location: Middletown, CT (USA) Posts: 204 Downloads: 0 Uploads: 0	From the DW manual... For anyone who is interested: Using DEMON to Calculate a Contactâ€™s Speed 1. First determine the class of the contact in the Narrowband, ESM or the Stadimeter Station. In the USNI Browser, find the entry for the ship or subâ€™s class and make note of the turns per knot number listed in the TPK field. *2. Ensure that there is a tracker assigned to the desired contact in Broadband sonar.* 3. Click SELECT ARRAY. A panel containing array buttons appears. Select the TOWED or SPHERE array. The selected button is green. Click BACK. 4. Click TRACKER REVIEW until the Contact ID and tracker letter for the contact you want to analyze appear in the DEMON Data Display. Lines appear in the DEMON Waterfall Display Note: If the game is paused, no lines appear in the waterfall display. 5. If necessary, adjust the frequency to better view the signal. If the lines in the display seem to blur together, switch to a lower frequency range. If the lines run off the right edge of the display, increase the frequency range. To adjust the frequency range, click FREQUENCY SCALE in the button matrix. A panel with frequency options appears. Click the desired scale. Click BACK. 6. Click above the line farthest left in the Waterfall display to select it. A vertical line above the contact indicates the line is selected. 7. Click TURNS PER KNOT in the button matrix. 8. In the panel that appears, click either INCREASE T.P.K. or DECREASE T.P.K. as necessary to set the desired TPK value. The TPK value entered is seen in the Data Display in the Turns Per Knot field. The speed for the designated TPK is displayed in the Speed field in the Data Display. 9. When you have determined the speed of the contact, enter that speed in the TMA SPEED field for the selected contact on the TMA Station.

09-16-05, 08:04 AM	#2
darksythe Lieutenant Join Date: Sep 2005 Posts: 269 Downloads: 4 Uploads: 0	just saved and restarted now only 1 appears any ideas?

09-16-05, 08:17 AM	#3
Dr.Sid The Old Man Join Date: May 2005 Location: Czech Republic Posts: 1,458 Downloads: 6 Uploads: 0	Ususaly you have to MANUALY assign tracker and right after that go to DEMON. It is somehow buggy. Also the contact must be strong enough.

09-16-05, 08:39 AM	#4
Molon Labe Silent Hunter Join Date: Jun 2004 Location: Along the Watchtower Posts: 3,810 Downloads: 27 Uploads: 5	I've never observed any bugginess in the Seawolf DEMON. Are you sure you're assigning the tracker in broadband?

09-16-05, 08:44 AM	#5
darksythe Lieutenant Join Date: Sep 2005 Posts: 269 Downloads: 4 Uploads: 0	no i had them assigned in narrowband but i have now gone back to sign them in BB and all is well thanks for help

09-16-05, 09:37 AM	#7
Molon Labe Silent Hunter Join Date: Jun 2004 Location: Along the Watchtower Posts: 3,810 Downloads: 27 Uploads: 5	Note to Akula drivers: Assigning a tracker in Broadband is a necessary, but not always sufficient, condition for getting DEMON data. Unlike the American subs, you cannot get DEMON data from a contact tracked in broadband that was first assigned a tracker in narrowband. In some cases, removing the narrowband tracker, and then assigning the broadband tracker, will allow DEMON data. In most cases, however, you will need to drop the contact and then assign the broadband tracker in order for DEMON data to appear.