How to prepare a mod?

PL_Andrev · 03-07-09, 06:47 AM

I would like to prepare very simple mod for SH3, which takes only two things:
These can be done by two ways:

1) Limitation of the decoy effective depending on the depth.

a) the effectiveness of decoy above 50m = zero (no decoy's effect)
b) protection to decoy's use above 50m (impossible to drop)

2) reduction of the possibility of a shot torpedo depending on the depth.

a) protection to torpedo's use above 30m (impossible to shot)
b) small damage of torpedo room if trying shot above 30m

Somebody know, how can I build it as mod?

Anvart · 03-07-09, 01:10 PM

above (???) or below ...?

Graf Paper · 03-07-09, 02:48 PM

I think he meant "beyond" instead of "above" when referring to the depths stated of 50m and 30m.

As for how you would modify these behaviors, Antar, I can only recommend you begin with the proper tools.

For editing and comparing the config files ( .cfg ), I highly recommend Notepad++ as it is well made for editing many types of text files.

Silent 3ditor ( S3D ), by skwas, is the absolute best tool for editing many features in Silent Hunter 3 and Silent Hunter 4.

For modifying graphics and textures, Photoshop is ideal. Two free alternatives are Paint.NET and GIMP.

Irfanview is excellent as a multimedia viewer that supports virtually every format there is and its batch conversion feature is very useful when you need to convert one or many graphics to a different type.

For modfying the 3D models, you'll need something like 3DS Max or Maya. Two very good free alternatives are Blender and Wings 3D.

Aside from this, there is not much else I can tell you except to explore the game files yourself and figure things out. I do know that most of what you wish to find can be found in the files for the uboats.

Look inside your Silent Hunter III installation folder. Inside you will see a folder called 'data'. Nearly all data and information the game uses is in this folder.

Inside 'data' you'll see another folder called 'Submarine'. This contains all the uboats that the game uses. inside of 'Submarine' are several folders, each named for the type of uboat. For example, the folder for the type VIIB uboat is labelled 'NSS_Uboat_7b'.

Inside each of those folders you'll find files with the extensions of '.cfg', '.dat', '.sim', '.val', .'cam', '.dsd', '.zon'., and '.eqp'.

What I do know is that the configuration (.cfg) files contain many settings that control how the uboat works. The equipment (.eqp) files contain settings for what types of equipment and weapons a uboat can carry. Both of these are text files that can be viewed and edited with any plain text editor.

Simulation (.sim), Value (.val), Data (.dat), Zone (.zon), Camera (.cam), and Direct Sound Data (.dsd) files can all be opened and edited using S3D.

Zone files control how a uboat takes damage by establishing 'hit point' zones for each area of the uboat hull.

Data files contain the actual 3D models and textures of the uboat.

Simulation and Value files deal with many effects and behaviors, such as the bow splashes and the turning radius of the uboat.

Camera files are just that, the camera or "eye" with which the player views the envrionment. Things this controls, for example, are the position you're standing in when you switch from one station in the uboat to another.

Direct Sound Data files control the various sounds that are associated with the uboat.

For the inside of the uboat you'll want to look into another folder inside 'data' that is labelled 'Interior'. There are folders for each uboat type inside that also contain files for the interior of the uboat.

These are just two places to look. You'll likely need to investigate files in the other game folders to find what you need but this will hopefully give you a start.

I wish I knew more to help you better. Good luck and looking forward to your mod being released!

Anvart · 03-09-09, 07:50 AM

Quote:

Originally Posted by Graf Paper

I think he meant "beyond" instead of "above" when referring to the depths stated of 50m and 30m.
...

You wish to say that speech about depth range (from surface) ...?
...
and (i think) he wished to read more concrete info ...

Graf Paper · 03-09-09, 03:18 PM

Yes, I think that he meant "depth range (from surface)".

You're likely right about that second observation. Many people who ask about how to make a mod really mean they want step-by-step instructions that require no thinking on their part or they simply wish for some expericenced modder to come along and do it for them.

We'll see, in time, of what sort is Antar. He might surprise us and take up the challenge and learn how to use S3D and other tools.

PL_Andrev · 03-10-09, 01:06 PM

Sorry for unreadable comment...

Decoys should work on 30 meters and deeper.
If the sub is of less depth (periscope-30) - decoys give a zero result (or cannot be used).

03-07-09, 06:47 AM	#1
PL_Andrev Grey Wolf Join Date: Feb 2009 Posts: 995 Downloads: 91 Uploads: 0	How to prepare a mod? I would like to prepare very simple mod for SH3, which takes only two things: These can be done by two ways: 1) Limitation of the decoy effective depending on the depth. a) the effectiveness of decoy above 50m = zero (no decoy's effect) b) protection to decoy's use above 50m (impossible to drop) 2) reduction of the possibility of a shot torpedo depending on the depth. a) protection to torpedo's use above 30m (impossible to shot) b) small damage of torpedo room if trying shot above 30m Somebody know, how can I build it as mod?

03-07-09, 01:10 PM	#2
Anvart Admiral Join Date: Jan 2006 Location: Russia ® Posts: 2,492 Downloads: 122 Uploads: 1	above (???) or below ...? __________________ Alex ® Moses said: "Don't create yourself an idol"...

03-07-09, 02:48 PM	#3
Graf Paper Ace of the Deep Join Date: Jan 2008 Location: Pacific Northwest United States Posts: 1,146 Downloads: 41 Uploads: 2	I think he meant "beyond" instead of "above" when referring to the depths stated of 50m and 30m. As for how you would modify these behaviors, Antar, I can only recommend you begin with the proper tools. For editing and comparing the config files ( .cfg ), I highly recommend Notepad++ as it is well made for editing many types of text files. Silent 3ditor ( S3D ), by skwas, is the absolute best tool for editing many features in Silent Hunter 3 and Silent Hunter 4. For modifying graphics and textures, Photoshop is ideal. Two free alternatives are Paint.NET and GIMP. Irfanview is excellent as a multimedia viewer that supports virtually every format there is and its batch conversion feature is very useful when you need to convert one or many graphics to a different type. For modfying the 3D models, you'll need something like 3DS Max or Maya. Two very good free alternatives are Blender and Wings 3D. Aside from this, there is not much else I can tell you except to explore the game files yourself and figure things out. I do know that most of what you wish to find can be found in the files for the uboats. Look inside your Silent Hunter III installation folder. Inside you will see a folder called 'data'. Nearly all data and information the game uses is in this folder. Inside 'data' you'll see another folder called 'Submarine'. This contains all the uboats that the game uses. inside of 'Submarine' are several folders, each named for the type of uboat. For example, the folder for the type VIIB uboat is labelled 'NSS_Uboat_7b'. Inside each of those folders you'll find files with the extensions of '.cfg', '.dat', '.sim', '.val', .'cam', '.dsd', '.zon'., and '.eqp'. What I do know is that the configuration (.cfg) files contain many settings that control how the uboat works. The equipment (.eqp) files contain settings for what types of equipment and weapons a uboat can carry. Both of these are text files that can be viewed and edited with any plain text editor. Simulation (.sim), Value (.val), Data (.dat), Zone (.zon), Camera (.cam), and Direct Sound Data (.dsd) files can all be opened and edited using S3D. Zone files control how a uboat takes damage by establishing 'hit point' zones for each area of the uboat hull. Data files contain the actual 3D models and textures of the uboat. Simulation and Value files deal with many effects and behaviors, such as the bow splashes and the turning radius of the uboat. Camera files are just that, the camera or "eye" with which the player views the envrionment. Things this controls, for example, are the position you're standing in when you switch from one station in the uboat to another. Direct Sound Data files control the various sounds that are associated with the uboat. For the inside of the uboat you'll want to look into another folder inside 'data' that is labelled 'Interior'. There are folders for each uboat type inside that also contain files for the interior of the uboat. These are just two places to look. You'll likely need to investigate files in the other game folders to find what you need but this will hopefully give you a start. I wish I knew more to help you better. Good luck and looking forward to your mod being released! __________________ Still sailing the high seas, hunting convoys with those who join me.

03-09-09, 03:18 PM	#5
Graf Paper Ace of the Deep Join Date: Jan 2008 Location: Pacific Northwest United States Posts: 1,146 Downloads: 41 Uploads: 2	Yes, I think that he meant "depth range (from surface)". You're likely right about that second observation. Many people who ask about how to make a mod really mean they want step-by-step instructions that require no thinking on their part or they simply wish for some expericenced modder to come along and do it for them. We'll see, in time, of what sort is Antar. He might surprise us and take up the challenge and learn how to use S3D and other tools. __________________ Still sailing the high seas, hunting convoys with those who join me.

03-10-09, 01:06 PM	#6
PL_Andrev Grey Wolf Join Date: Feb 2009 Posts: 995 Downloads: 91 Uploads: 0	Sorry for unreadable comment... Decoys should work on 30 meters and deeper. If the sub is of less depth (periscope-30) - decoys give a zero result (or cannot be used).