RUB 1.45 and IUB 2.0

slipper · 01-11-06, 09:27 AM

I am just getting back into sh3, after a time out. My main problem was that i could never seem to keep up with the new mods, and kept un - installing, or rolling back, to incorporate new ones.

anyway, back on track, my question is this, what will happen if i install RUB 1.45 and then IUB 2.0, as i see in the readme for IUB that RUB 1.44 is supported ? has anyone tried it ?

Basically i'm after realisim without tracking down loads of mods, would you agree that the two mods mentioned are the best way to go about it ( along with SH3 Commander ) ? if not what would you recomend, aswell as the mods mentioned.

Lastly is there any plan to update IUB/RUB so that they are both compatible with the latest version of each other.

thanks for reading, and for any replies that i recieve

p.s thanks to all the modders, doing a great job with this game, i just dont have the time to go through them all.

HanSolo78 · 01-11-06, 10:16 AM

As far as I know IuB contains RuB !!! :hmm:

shanetrott · 01-11-06, 02:54 PM

I agree HanSolo78. I thought IUB contained RUB as well.

You mention IUB 2.0? I thought the latest version was 1.02 or is there are newer version available?

Gizzmoe · 01-11-06, 02:57 PM

No, 1.02 is the latest version.

malcymalc · 01-12-06, 02:22 PM

Yes but IUB 1.02 contains RuB1.44 - whereas RuB has moved onto RuB1.45.

I think that installing IuB after RuB would cause the RuB1.45 to be overwritten but I am not sure what effect doing things the other way round would cause.

Malcolm

GOZO · 01-16-06, 07:15 AM

Hi. At the moment I am cross-reading IU 1.02 with RUB1.45. Since they are both well documented you can actually pick out most of the "Deltas" between RUB1.44 & 1.45, check these against the IU 1.02 and carefully put them in (if you want to). Aiming at having my own tailored IU/RUB finished by this week.

For example the data/Menu/de_menu.txt and en_menu.txt is easy read in "notebook". In here you can change renown req. for type XXI to 15000 (as in RUB1.45). I have myself reintroduced "HULL INTEGRITY" wich should say: 589=HULL INTEGRITY %s %.

I think most of RUB 1.45 can be "inserted" bit by bit .

P.S.
Lost a campaign again due to mines between AN87 % AN67

irish1958 · 01-16-06, 10:03 AM

Gozo, are you going to release your work?
irish1958

GOZO · 01-18-06, 08:33 AM

Sure. Since I am a newbe I shall fugure out how. Will do some work/tests tonight.

Regained depth control

By the way, we just got the news that the Swedish SSK "Gotland" (wich is leased to the USN for traing under a year i San Diego) has slipped through the ASW-screen and "sunk a carrier" (scope-photo).

Happy hunting Gotland

slipper · 01-19-06, 04:55 AM

Thanks for all the replies, would really like to get IUB 1.2 (NOT 2.0 my mistake) and RUB 1.45 merged. if anyones done it can they please post somewhere.

also i was thinking of doing a clean install before i install IUB, but before i do can anyone tell me how i can adjust the screen resolution, i currently have it at 1600 x 1200, but to do this i had to download and install a file and i cant remeber what it was.

thanks again for all your help

01-11-06, 09:27 AM	#1
slipper Navy Dude Join Date: Mar 2005 Posts: 174 Downloads: 385 Uploads: 0	RUB 1.45 and IUB 2.0 I am just getting back into sh3, after a time out. My main problem was that i could never seem to keep up with the new mods, and kept un - installing, or rolling back, to incorporate new ones. anyway, back on track, my question is this, what will happen if i install RUB 1.45 and then IUB 2.0, as i see in the readme for IUB that RUB 1.44 is supported ? has anyone tried it ? Basically i'm after realisim without tracking down loads of mods, would you agree that the two mods mentioned are the best way to go about it ( along with SH3 Commander ) ? if not what would you recomend, aswell as the mods mentioned. Lastly is there any plan to update IUB/RUB so that they are both compatible with the latest version of each other. thanks for reading, and for any replies that i recieve p.s thanks to all the modders, doing a great job with this game, i just dont have the time to go through them all.

01-16-06, 07:15 AM	#6
GOZO Commander Join Date: Aug 2004 Location: Linkoping, Sweden Posts: 479 Downloads: 176 Uploads: 0	Hi. At the moment I am cross-reading IU 1.02 with RUB1.45. Since they are both well documented you can actually pick out most of the "Deltas" between RUB1.44 & 1.45, check these against the IU 1.02 and carefully put them in (if you want to). Aiming at having my own tailored IU/RUB finished by this week. For example the data/Menu/de_menu.txt and en_menu.txt is easy read in "notebook". In here you can change renown req. for type XXI to 15000 (as in RUB1.45). I have myself reintroduced "HULL INTEGRITY" wich should say: 589=HULL INTEGRITY %s %. I think most of RUB 1.45 can be "inserted" bit by bit . P.S. Lost a campaign again due to mines between AN87 % AN67 __________________ SHIV:TMo 2.5, RSRD, SCAF OLC, Ralle's modpack SHIV: WDAD, Med Campaign SHIII: GWX3 GOLD, OLCII Gold, ACM-reloaded interface mod, SHIIIcmndr 3.2, Full Realism/DiD SHIII: LSH3 2015 Cold Waters with all bells and whistles Finally SHV but still unmodded and still a noob....

01-16-06, 10:03 AM	#7
irish1958 Ocean Warrior Join Date: Apr 2005 Location: Carmel, Indiana Posts: 3,250 Downloads: 320 Uploads: 11	RUB AND IUB Gozo, are you going to release your work? irish1958

01-18-06, 08:33 AM	#8
GOZO Commander Join Date: Aug 2004 Location: Linkoping, Sweden Posts: 479 Downloads: 176 Uploads: 0	Sure. Since I am a newbe I shall fugure out how. Will do some work/tests tonight. Regained depth control By the way, we just got the news that the Swedish SSK "Gotland" (wich is leased to the USN for traing under a year i San Diego) has slipped through the ASW-screen and "sunk a carrier" (scope-photo). Happy hunting Gotland __________________ SHIV:TMo 2.5, RSRD, SCAF OLC, Ralle's modpack SHIV: WDAD, Med Campaign SHIII: GWX3 GOLD, OLCII Gold, ACM-reloaded interface mod, SHIIIcmndr 3.2, Full Realism/DiD SHIII: LSH3 2015 Cold Waters with all bells and whistles Finally SHV but still unmodded and still a noob....

01-11-06, 10:16 AM	#2
HanSolo78 Sea Lord Join Date: Apr 2005 Location: Austria Posts: 1,842 Downloads: 100 Uploads: 3	As far as I know IuB contains RuB !!! :hmm:

01-11-06, 02:54 PM	#3
shanetrott Seaman Join Date: Apr 2005 Posts: 32 Downloads: 36 Uploads: 0	I agree HanSolo78. I thought IUB contained RUB as well. You mention IUB 2.0? I thought the latest version was 1.02 or is there are newer version available?

01-11-06, 02:57 PM	#4
Gizzmoe Silent Hunter Join Date: Mar 2005 Location: Germany Posts: 3,668 Downloads: 4 Uploads: 0	No, 1.02 is the latest version.

01-12-06, 02:22 PM	#5
malcymalc Bosun Join Date: Dec 2005 Posts: 64 Downloads: 0 Uploads: 0	Yes but IUB 1.02 contains RuB1.44 - whereas RuB has moved onto RuB1.45. I think that installing IuB after RuB would cause the RuB1.45 to be overwritten but I am not sure what effect doing things the other way round would cause. Malcolm

01-19-06, 04:55 AM	#9
slipper Navy Dude Join Date: Mar 2005 Posts: 174 Downloads: 385 Uploads: 0	Thanks for all the replies, would really like to get IUB 1.2 (NOT 2.0 my mistake) and RUB 1.45 merged. if anyones done it can they please post somewhere. also i was thinking of doing a clean install before i install IUB, but before i do can anyone tell me how i can adjust the screen resolution, i currently have it at 1600 x 1200, but to do this i had to download and install a file and i cant remeber what it was. thanks again for all your help