Stability issues...and I don't mean in a heavy sea

ChasseurJean · 12-06-19, 09:07 AM

Hello all,

First off I wanted to thank the existence of this forum for getting me back into SH3. It's been several years since I played but reading here showed me there is still a thriving community.

As you can probably guess I re-installed SH3 recently. After some hunting I was able to more or less re-assemble the package of mods I had used way back when, as well as a few new ones. So far so good but I think I got a little overzealous with all the amazing new mods out there and encountered enough stability issues to prompt me to uninstall and start fresh.

Somehow though I am now worse off than before. After twice uninstalling through Steam and manually deleting the SH3 folder in steam apps as well as the SH3 folder in "Documents" I re-installed three mods GWX3, SubCommander and a widescreen fix and now it crashes upon trying to start the first mission of a new career.

Loading it with just GWX works, but starting through Subcommander and it gets to 100% loading to start my first patrol and then CTD's.

I'm wondering if there are some files somewhere else that I need to delete to have a completely clean install? Or perhaps the Widescreen fix I'm using isn't compatible, even though it seemed to be working before?

Again I'm rather flummoxed because I had it more or less working before and now after starting fresh I can't get a mission to start.

Any help is appreciated. I'm too old/slow to compete with the kids playing Warthunder and World of Warships anymore so I'm really hoping I can get SH3 up and running again.

Cheers.

John Pancoast · 12-06-19, 12:01 PM

When it started with just GWX did that include the widescreen mod too ?

Aktungbby · 12-06-19, 12:22 PM

ChasseurJean!

THEBERBSTER · 12-06-19, 03:51 PM

A Warm Welcome To The Subsim Community > ChasseurJean
Subsim <> Make A Donation <> See The Benefits <> Support The Community
SH3 – 4 - 5 Tutorials > Downloads > Other Useful Information > See Links in My Signature Below

There are a number of reasons why you might be experiencing the problems you mention.
Run windows 10 in compatibility mode for Windows 7.
Run the applications as administrators.

Install the 4gb patch.
GWX with SH3Commander needs an additional configuration patch.
I have information on GWX in my tutorial below.

ChasseurJean · 12-06-19, 03:58 PM

Thank you! I will give this a try!

Pisces · 12-07-19, 06:03 AM

Quote:

Originally Posted by THEBERBSTER

GWX with SH3Commander needs an additional configuration patch.
I have information on GWX in my tutorial below.

The above might be interpreted incorrectly. The configuration files for SH3 Commander with GWX are a patch for SH3 Commander folder. Not as a mod in the JSGME MODS-folder to be applied to SH3 itself. Extract the contents into the SH3 Commander folder!

I think he means this link. (Somewhere around 4/5ths of the LHS3 2015 page.)
http://www.mediafire.com/file/5ri36m...anual.zip/file

ChasseurJean · 12-11-19, 09:15 PM

Thank you all for the warm welcome and the advice!

I have made some major progress but I have run up against the "cannot initialize 3D engine" bug. I have searched through the forum and I think I have tried all the fixes except the

"Download Direct x 9 fix."

I can't seem to find a link for this that still works. If anyone could point me to one it would be greatly appreciated.

I'm running an AMD Radeon R7 200 series graphics card on WIndows 10 home.

I'm running SH3.exe as an administrator, I've changed the compatibility to OS 7 and I've switched the graphics card to GPU scaling "On" and preserving aspect ratio, so the Direct x repair seems to be my last option.

Thanks again for the help. Good Hunting all!

-ChasseurJean

12-06-19, 09:07 AM	#1
ChasseurJean Nub Join Date: Dec 2019 Posts: 4 Downloads: 4 Uploads: 0	Stability issues...and I don't mean in a heavy sea Hello all, First off I wanted to thank the existence of this forum for getting me back into SH3. It's been several years since I played but reading here showed me there is still a thriving community. As you can probably guess I re-installed SH3 recently. After some hunting I was able to more or less re-assemble the package of mods I had used way back when, as well as a few new ones. So far so good but I think I got a little overzealous with all the amazing new mods out there and encountered enough stability issues to prompt me to uninstall and start fresh. Somehow though I am now worse off than before. After twice uninstalling through Steam and manually deleting the SH3 folder in steam apps as well as the SH3 folder in "Documents" I re-installed three mods GWX3, SubCommander and a widescreen fix and now it crashes upon trying to start the first mission of a new career. Loading it with just GWX works, but starting through Subcommander and it gets to 100% loading to start my first patrol and then CTD's. I'm wondering if there are some files somewhere else that I need to delete to have a completely clean install? Or perhaps the Widescreen fix I'm using isn't compatible, even though it seemed to be working before? Again I'm rather flummoxed because I had it more or less working before and now after starting fresh I can't get a mission to start. Any help is appreciated. I'm too old/slow to compete with the kids playing Warthunder and World of Warships anymore so I'm really hoping I can get SH3 up and running again. Cheers.

12-06-19, 12:01 PM	#2
John Pancoast Ocean Warrior Join Date: Apr 2002 Location: Minnysoda Posts: 3,211 Downloads: 501 Uploads: 4	When it started with just GWX did that include the widescreen mod too ? __________________ "Realistic" is not always GAME-GOOD." - Wave Skipper

12-06-19, 12:22 PM	#3
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 29,995 Downloads: 24 Uploads: 0	Welcome aboard! ChasseurJean! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

12-06-19, 03:51 PM	#4
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Hythe - Southampton Posts: 9,609 Downloads: 1133 Uploads: 0	A Warm Welcome To The Subsim Community > ChasseurJean Subsim <> Make A Donation <> See The Benefits <> Support The Community SH3 – 4 - 5 Tutorials > Downloads > Other Useful Information > See Links in My Signature Below There are a number of reasons why you might be experiencing the problems you mention. Run windows 10 in compatibility mode for Windows 7. Run the applications as administrators. Install the 4gb patch. GWX with SH3Commander needs an additional configuration patch. I have information on GWX in my tutorial below. __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

12-06-19, 03:58 PM	#5
ChasseurJean Nub Join Date: Dec 2019 Posts: 4 Downloads: 4 Uploads: 0	Thank you! I will give this a try!

12-11-19, 09:15 PM	#7
ChasseurJean Nub Join Date: Dec 2019 Posts: 4 Downloads: 4 Uploads: 0	Thank you all for the warm welcome and the advice! I have made some major progress but I have run up against the "cannot initialize 3D engine" bug. I have searched through the forum and I think I have tried all the fixes except the "Download Direct x 9 fix." I can't seem to find a link for this that still works. If anyone could point me to one it would be greatly appreciated. I'm running an AMD Radeon R7 200 series graphics card on WIndows 10 home. I'm running SH3.exe as an administrator, I've changed the compatibility to OS 7 and I've switched the graphics card to GPU scaling "On" and preserving aspect ratio, so the Direct x repair seems to be my last option. Thanks again for the help. Good Hunting all! -ChasseurJean