SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Silent Hunter 3 - 4 - 5 > Silent Hunter 4: Wolves of the Pacific
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 01-09-09, 12:28 PM   #1
hardwir3d
Swabbie
 
Join Date: Jan 2009
Location: Netherlands
Posts: 7
Downloads: 12
Uploads: 0
brand new 'puter, sh4 crashes and crashes :(

Hello everyone,

After lurking around this forum for almost three years and having envied lots of people here for being able to run SH4 for almost 2 years now, I finally got around to purchasing a new rig to play SH4. Finally got rid of the 512MB P4

Ofcorse, 1st thing I did after installing the OS was installing SH3 and 4. SH3-GWX runs fine (@220-250 fps), but SH4 keeps crashing and crashing

First, my system specs:
i7-920 (not overclocked... yet )
6 GB Kingston HyperX DDR3-1600
ATI Radeon HD4870 OC 1 GB GDDR 5
Soundblaster X-fi
2xSamsung Spinpoint 700GB -> 1.4 TB RAID0
Windows Vista SP1 &
Windows XP Corp x64 SP2
ATI Catalyst 8.12
SB Drivers 2.18.0008

I have SH4 and Uboat missions installed, which patches it to V1.5... right?

Second, the problem that occurs:
In both Vista and XP x64, everything runs fine until the actual game starts. It immediately 'stutters' and everything is 'garbled up', like seeing 2 portions of the interior mixed together. Uh, this may sound a bit vague, but I've got no clue how else to describe this. The problem seems to be largely concentrated to the sub's interior. If I switch to free camera view, the game behaves much better, almost like normal (tho it still tends to crash way too often). Windows XP x64 runs the game better than Vista does (crashes 'only' after 3 minutes, instead of seconds on avg. in #$%%^ Vista. (damn. vista is a real pain in the ass. bill still manages to make things worse and worse))

I get no error code or error message or anything. It just garbles things up, stutters, hangs and crashes to desktop as soon as I move back into the interior from freecam mode. In Vista it is almost impossible to even get to freecam mode, as it tends to crash before that, in XP I usually manage to go to freecam before it crashes.

I've tried different graphic settings, different drivers, different OS's, different resolutions, it all doesn't matter, SH4 stutters, hangs, crashes, stutters, hangs, crashes.

I'm really at a loss here. *sniffles*

And I FINALLY wanna play this game so bad! I hope some subsim kaleun can save me from my misery
hardwir3d is offline   Reply With Quote
Old 01-09-09, 12:45 PM   #2
AVGWarhawk
Lucky Jack
 
AVGWarhawk's Avatar
 
Join Date: Jun 2005
Location: In a 1954 Buick.
Posts: 28,280
Downloads: 90
Uploads: 0


Default

I'm running SH4 with Phenoms/4 gig ram and 9800 GT, Vista 64 bit. No problems. I suspect your problems are coming from you vid card. Last night, I reinstalled SH4 into the Microsoft Games folder. When done, the game would load but no screen. Just black. I defaulted my settings in the Nvidia control panel and then reset them to where I wanted them. Problem solved. Set your vid card up to the default values and see how it runs. If it runs like it should. Start your tweaking
__________________
“You're painfully alive in a drugged and dying culture.”
― Richard Yates, Revolutionary Road
AVGWarhawk is offline   Reply With Quote
Old 01-09-09, 01:03 PM   #3
FIREWALL
Eternal Patrol
 
Join Date: Mar 2006
Location: CATALINA IS. SO . CAL USA
Posts: 10,108
Downloads: 511
Uploads: 0
Default

Welcome Aboard Hardwir3d

I have a dual boot XP Pro sp2 and Vista Ultimate 64 setup.

I just let SH4 UBM Gold install by default on Vista and no problems. Try a reinstall first before fecking with everything.

In the past once with XP I installed SH3 and didn't have any sound.

Swapped out sound card and almost bought new speakers.

Try the easy shet first. AND... Let us know when you get it going so as to help others.

Catch you later and enjoy SH4
__________________
RIP FIREWALL

I Play GWX. Silent Hunter Who ???
FIREWALL is offline   Reply With Quote
Old 01-09-09, 03:17 PM   #4
Soundman
Commodore
 
Join Date: Jul 2006
Location: Orlando, Fl
Posts: 617
Downloads: 60
Uploads: 0
Default

I run SH4 on two computers, both with vista. It runs great on both of them. I doubt vista is the issue here.
Soundman is offline   Reply With Quote
Old 01-09-09, 03:29 PM   #5
hardwir3d
Swabbie
 
Join Date: Jan 2009
Location: Netherlands
Posts: 7
Downloads: 12
Uploads: 0
Default

Quote:
Originally Posted by AVGWarhawk
I suspect your problems are coming from you vid card.
Yeah, so do I. I just don't have a clue what the exact problem is. Crysis crashes all the time too. And much quicker when all GFX settings are to max. Weird, cos it runs very smoothly even then. It's almost like Vista sees the GPU temp and just crashes when it gets high. Even tho I've read Radeon 4870's should be able to operate normally at 135C. Dunno if thats true tho. It's really noisy after it CTD'ed. And I suspect someone like Bill Gates is truly capable of releasing an OS that doesn't give my Radeon permission to operate at high temperatures, even if the Radeon is built to operate at extremely high temps. M$ Vista being that wonderful... Well, it wouldn't really wouldn't surprise me. This OS is an insult to one's intelligence.

"Bill Gates doesn't give your Radeon permission to operate at temperatures over 90C. Vista will now 'protect' your hardware. Click 'next' to continue, if you have permission to click 'next'."

It isn't anywhere near that noisy when SH4 crashes. But I don't know. Maybe Catalyst 8.12 really has ****ty drivers. Red Alert 3 runs like a dream tho.
Quote:
Set your vid card up to the default values and see how it runs. If it runs like it should. Start your tweaking
Are you talking about GPU overclocking? All system settings are still default. There's an ASUS Triton 81 CPU cooler in my system, for future overclocking. Heard ~4Ghz should be possible with a good cooler. And the Radeon... well, maybe +8 or 10%? I just haven't gotten around to do that, as I'm still trying to figure out lotsa other new things that come with a new system and OS. (Like Vista refusing to install 64-bit codecs demmit) Besides, I haven't even been able to stretch this system to the max. (First Futuremark test still isn't performed :p) No matter what I do with it, it just happily complies while still picking it's nose.

I really hope I don't have to wait for a next driver release. Only to see the SH4 problem isn't fixed.


Are there other kaleuns here who have a Radeon 4870?

Quote:
Originally Posted by FIREWALL
Welcome Aboard Hardwir3d
Thank you. How very kind.
Quote:
I have a dual boot XP Pro sp2 and Vista Ultimate 64 setup.

I just let SH4 UBM Gold install by default on Vista
I have installed it under Vista. Besides Crysis CTD's (which does run properly before it crashes, no stuttering and all) I dont have much problems with all other games I own.
Quote:
and no problems.
I wish. SH4 is one of the most important games I wanna play on this system. Another one is the upcoming Cities XL. I'm already having nightmares CXL won't run properly either.
Quote:
Try a reinstall first before fecking with everything.
Check. *stutter, hang, CTD*


What videocard do you have?
Quote:
In the past once with XP I installed SH3 and didn't have any sound.
Quote:
Swapped out sound card and almost bought new speakers.

Try the easy shet first. AND... Let us know when you get it going so as to help others.
If I get it running, I'm gonna hire a small biplane with a 'SH4 runs like a dream on my i7-920' banner. That's how happy it will make me.
Quote:
Catch you later and enjoy SH4
I have... a bit. Freecam in the harbor in XP x64. For five minutes. Perhaps I should start playing it in XP and save it every 2 minutes. And only go to the interior when it's really needed. "I'll take the first, second, third and fourth watch!"

Last edited by hardwir3d; 01-09-09 at 03:40 PM.
hardwir3d is offline   Reply With Quote
Old 01-09-09, 03:47 PM   #6
FIREWALL
Eternal Patrol
 
Join Date: Mar 2006
Location: CATALINA IS. SO . CAL USA
Posts: 10,108
Downloads: 511
Uploads: 0
Default

Quote:
Originally Posted by hardwir3d
Quote:
Originally Posted by AVGWarhawk
I suspect your problems are coming from you vid card.
Yeah, so do I. I just don't have a clue what the exact problem is. Crysis crashes all the time too. And much quicker when all GFX settings are to max. Weird, cos it runs very smoothly even then. It's almost like Vista sees the GPU temp and just crashes when it gets high. Even tho I've read Radeon 4870's should be able to operate normally at 135C. Dunno if thats true tho. It's really noisy after it CTD'ed. And I suspect someone like Bill Gates is truly capable of releasing an OS that doesn't give my Radeon permission to operate at high temperatures, even if the Radeon is built to operate at extremely high temps. M$ Vista being that wonderful... Well, it wouldn't really wouldn't surprise me. This OS is an insult to one's intelligence.

"Bill Gates doesn't give your Radeon permission to operate at temperatures over 90C. Vista will now 'protect' your hardware. Click 'next' to continue, if you have permission to click 'next'."

It isn't anywhere near that noisy when SH4 crashes. But I don't know. Maybe Catalyst 8.12 really has ****ty drivers. Red Alert 3 runs like a dream tho.
Quote:
Set your vid card up to the default values and see how it runs. If it runs like it should. Start your tweaking
Are you talking about GPU overclocking? All system settings are still default. There's an ASUS Triton 81 CPU cooler in my system, for future overclocking. Heard ~4Ghz should be possible with a good cooler. And the Radeon... well, maybe +8 or 10%? I just haven't gotten around to do that, as I'm still trying to figure out lotsa other new things that come with a new system and OS. (Like Vista refusing to install 64-bit codecs demmit) Besides, I haven't even been able to stretch this system to the max. (First Futuremark test still isn't performed :p) No matter what I do with it, it just happily complies while still picking it's nose.

I really hope I don't have to wait for a next driver release. Only to see the SH4 problem isn't fixed.


Are there other kaleuns here who have a Radeon 4870?

Quote:
Originally Posted by FIREWALL
Welcome Aboard Hardwir3d
Thank you. How very kind.
Quote:
I have a dual boot XP Pro sp2 and Vista Ultimate 64 setup.

I just let SH4 UBM Gold install by default on Vista
I have installed it under Vista. Besides Crysis CTD's (which does run properly before it crashes, no stuttering and all) I dont have much problems with all other games I own.
Quote:
and no problems.
I wish. SH4 is one of the most important games I wanna play on this system. Another one is the upcoming Cities XL. I'm already having nightmares CXL won't run properly either.
Quote:
Try a reinstall first before fecking with everything.
Check. *stutter, hang, CTD*


What videocard do you have?
Quote:
In the past once with XP I installed SH3 and didn't have any sound.
Quote:
Swapped out sound card and almost bought new speakers.

Try the easy shet first. AND... Let us know when you get it going so as to help others.
If I get it running, I'm gonna hire a small biplane with a 'SH4 runs like a dream on my i7-920' banner. That's how happy it will make me.
Quote:
Catch you later and enjoy SH4
I have... a bit. Freecam in the harbor in XP x64. For five minutes. Perhaps I should start playing it in XP and save it every 2 minutes. And only go to the interior when it's really needed. "I'll take the first, second, third and fourth watch!"
My new homebuilt rig with parts from TigerDirect

Intel DX58SO Socket LGA1366 Motherboard CPU Bundle - Intel Core i7 965 Quad Core, 3.20GHz, 8MB L3 Cache, Hyperthreading, Extreme Edition Processor



Thermaltake ProWater 850i Liquid Cooling System


Corsair TWINX Dominator Dual Channel 2048MB PC14400 DDR3 1800MHz Memory (2 x 1024MB) x 2

Sapphire Radeon HD 4870 X2 Video Card - 2GB GDDR5, PCI Express 2.0, CrossFire, (2) Dual Link DVI, HDTV

Ultra X3 ULT40070 1600-Watt Power Supply - ATX, SATA-Ready, PCI-E Ready, Energy Efficient,
Modular

Cooler Master RC-1100 Cosmos S ATX Full-Tower Case
__________________
RIP FIREWALL

I Play GWX. Silent Hunter Who ???
FIREWALL is offline   Reply With Quote
Old 01-09-09, 03:52 PM   #7
AVGWarhawk
Lucky Jack
 
AVGWarhawk's Avatar
 
Join Date: Jun 2005
Location: In a 1954 Buick.
Posts: 28,280
Downloads: 90
Uploads: 0


Default

Go to 3DGuru and there is a ATI vid card utility there. I forget the name. Do a search. I found the Catalyst with ATI are horrible. In fact, the one ATI card I had I did not like. Any, fool around with your card and see how it goes.
__________________
“You're painfully alive in a drugged and dying culture.”
― Richard Yates, Revolutionary Road
AVGWarhawk is offline   Reply With Quote
Old 02-01-09, 04:25 PM   #8
hardwir3d
Swabbie
 
Join Date: Jan 2009
Location: Netherlands
Posts: 7
Downloads: 12
Uploads: 0
Default

I've installed ATI 9.1
SH4 works a lot better now. Still stutters at times, but playable. Interior works smoothly now. I hope all gets well before the release of GWX4.

All of you, thanks again for your responses.
hardwir3d is offline   Reply With Quote
Old 02-01-09, 06:06 PM   #9
Gato76
Planesman
 
Join Date: Apr 2008
Posts: 192
Downloads: 82
Uploads: 0
Default

Enable Vsync in the options menu and the stuttering will go away
Gato76 is offline   Reply With Quote
Old 02-02-09, 03:32 PM   #10
hardwir3d
Swabbie
 
Join Date: Jan 2009
Location: Netherlands
Posts: 7
Downloads: 12
Uploads: 0
Default

I suppose all of you here also have that little file called 'GU.EXE' in your SH4 directory?

Amazing. I was wondering what it was, double clicked it to find out, and all of a sudden SH4 boots without the intro movie and WITHOUT ANY PROBLEMS!



No freecam problems, no interior crashes, no stuttering, all smooth and fast! Finally!
hardwir3d is offline   Reply With Quote
Old 01-12-09, 01:21 AM   #11
I'm goin' down
Ocean Warrior
 
Join Date: Sep 2008
Location: Notify command we have entered the Grass Sea
Posts: 2,822
Downloads: 813
Uploads: 0
Default refresh rate

I too had computer crashing problems, as I had a decent computer with a good video gaming card. Someone suggested I reduce the refresh rate on the windows display. That did the trick!! Other than that suggestion, I am a computer illiterate but I wish you luck. I gave SH4 to my young nephew and it crashed his machine, so you are not alone.
I'm goin' down is offline   Reply With Quote
Old 01-12-09, 09:52 AM   #12
longam
Admiral
 
Join Date: Jun 2005
Posts: 2,014
Downloads: 26
Uploads: 0
Default

Don't forget to allow DirectX 9 install when you install SH4. Sounds dumb but its needs it.

my 2cents
longam is offline   Reply With Quote
Old 01-12-09, 09:33 PM   #13
gimpy117
Ocean Warrior
 
Join Date: Jul 2007
Location: Kalamazoo, MI
Posts: 3,243
Downloads: 108
Uploads: 0
Default

btw anybody ever had problems with Catalyst not Anti aliasing etc. and fixed it??

it seems to work sometimes and others not for no really good reason...is it a setting of windows or??
__________________
Member of the Subsim Zombie Army
gimpy117 is offline   Reply With Quote
Old 01-14-09, 04:56 PM   #14
XLjedi
Ace of the Deep
 
Join Date: Jun 2005
Location: Palm Beach, Florida
Posts: 1,243
Downloads: 53
Uploads: 8
Default

SH4 use to studder and do funny graphical things after I played it for about 10-15 mins or so.

I happened to notice the GPU was getting ouchey hot. I cut a big whole in the case and installed a couple 120mm fans and the studdering stopped and the GPU is no longer feverish.
__________________
XLjedi is offline   Reply With Quote
Old 01-15-09, 11:24 AM   #15
Urge
Stowaway
 
Posts: n/a
Downloads:
Uploads:
Default

Fincuan wrote...
Quote:
4)Followed the advice in this thread: http://forums.guru3d.com/showthread.php?t=217673
I have a Diamond Radeon HD 3850/512MB GPU which I am mostly happy with but I would be interested in what settings you tweaked and how that impacted the game? I am using the CCC although I did download the ATI Tray tools but I haven't used them as of yet. I had the impression(mistakenly?) that they were mostly for overclockers and so far I haven't felt the need to try OCing my machine.
My system: DFI lANPARTY P35 T2RS MB with an Intel Xeon E3110 CPU@3GHz ( FSB 1333MHz), 2 gigs Corsair XMS2 DDR2SDRAM DDR2 800 (PC2 6400), DIAMOND Viper Radeon HD 3850 512MB 256-bit GDDR3 PCI Express 2.0 x16 (Built-in HDMI with Multi-channel 5.1 surround audio) , 2 WD sata HDs 10,000rpm & 7200rpm, a Corsair 650W PSU and a used Lian Li case. I built this system myself almost a year ago for $7-800.

Urge
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:41 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.