Basic Help

Sub Sailor · 03-05-08, 10:52 AM

I just got the simulation yesterday and starting the training missions. Is it possible to make VERY MINOR couese changes in SHIV. If I use Hard Rudder I am just to dam old and slow to catch it with Rudder Amidship. Can any pody give me some pointers?
I must be really slow but on the Navigation Training, but is the designated zone the flag?

Ron Banks MMCM(SS), USN(Ret)
A Really Old Nuke

fred8615 · 03-05-08, 11:04 AM

Click the button right underneath the compass. That changes it to a gauge that gives you finer helm control.

Zantham · 03-05-08, 11:08 AM

I doubt you can get it accurate to a degree, but you can click with your mouse on the compass on the bottom of the screen to select a new heading, its pretty easy to get within a few degrees doing this, or you can click below the compass and change the display to a rudder control, and you can click this to give you pretty good control over how fast you turn.

There is no keys I've found that do any more than apply full rudder either way, and center rudder.

peabody · 03-05-08, 11:32 AM

Quote:

Originally Posted by Sub Sailor

I just got the simulation yesterday and starting the training missions. Is it possible to make VERY MINOR couese changes in SHIV. If I use Hard Rudder I am just to dam old and slow to catch it with Rudder Amidship. Can any pody give me some pointers?
I must be really slow but on the Navigation Training, but is the designated zone the flag?

Ron Banks MMCM(SS), USN(Ret)
A Really Old Nuke

Welcome Ron,

Well, here's an answer from another that's very old and slow and also very new to the game, not yesterday but about a month. You don't need to use the keyboard, you can use the mouse and click on the compass at the bottom of the screen. It's not super accurate but it works better than hard port or starboard on the keyboard. Using hard starboard you end up with the ship drifting by before it gets straightened out. And except for manually docking the ship, you really don't need to be that accurate in the game anyway. There is a button to plot your course on the map by drawing waypoints, If you draw a line to the star and then zoom the map in closer you will see you may have missed it by a long shot, but it will probably count as getting there anyway. So don't worry about "minor" corrections while you are learning, you really don't need it.

And all through the game, even in "Career mode" when they tell you where to go, there will be a star of some kind. So, the simple answer is yes the star is your destination. Also, if you are new the different colors of water on the map screen mean different depths, so be careful you don't submerge too deep expecially in "White". That is only about enough for periscope depth and sometimes not even deep enough for that. Not as accurate as a real life map with accurate depths but it is really all the info you need for the game.

The manual as most here will tell you, is horrible!!!! The buttons in the manual don't agree with all the buttons on the sub. Some do, some don't. If you hover your mouse over them, there will be a popup that tells you what it does. There are some excellent tutorials on this forum when you start getting a bit more advanced. Look above for "Sticky: Technical help and questions...", and there are others thoughout the forums, just ask and someone will help you out.

If I may ask, what does the MMCM(SS) stand for? I was never in the navy, I did take Air Force ROTC but my eyes kept me out of the sky, so I never did serve. I just want to tell you I have the highest respect for those who did serve. I thank you for that!!

Peabody

Edit: I guess the old man types too slow, I see there are already two answers before me!

JREX53 · 03-05-08, 11:43 AM

peabody,

MMCM(SS) (RET), means he is a Retired Master Chief Machinist Mate qualified in submarines.

Yanaran · 03-05-08, 12:01 PM

Another good command to know is "heading to view" (+). It turns the boat in the direction you're looking. I use it mostly when already engaged in combat but it's useful for making small corrections to course for example when lining up a shot. Say you've decided to line up straight north and click the compass and end up with 358 degrees. Instead of trying to click 0 degrees with the mouse I just go to periscope, point it 2 degrees to starboard and hit heading to view (after the boat has already lined up at 358 of course).

Major Johnson · 03-05-08, 02:34 PM

I like this guy, he got the sim yesterday, and he's got 480 some odd posts! Ok, maybe he's got SH3, or maybe he's just a member. Point being, here I am with a little over 120 posts, bought the game when it first came out and I can relate to his plight! I agree with peabody, the manual is useless, and the steep learning curve is what's kept me away from the game for so long. Personally I liked how they had it in SH1 where you could use the left/right arrow buttons and they would increment in 5 degrees until you got to 35 degrees in one direction or the other. I find that quicker than using the mouse and fumbling for the compass. And the up and down arrows worked for setting bow and stern planes so that the boat would angle the boat up or down, rather than having to specify a depth right away. I would give the order to dive the boat, then go to the control room and then decide my depth.

But I do like the tip about the + key being used to direct the boat in the direction your looking! I'm going to try that one out tonight!! Is there a key function that automatically sets the view to 0º??? I know, I know, I'm stuck in SH1, but some of those features were so convenient! :p

Zantham · 03-05-08, 03:44 PM

Yes there is a set heading to view, and there is a set view to heading key... and if I was at home I could even tell you what it was!!!

Yanaran · 03-05-08, 04:27 PM

Quote:

Originally Posted by Major Johnson

Is there a key function that automatically sets the view to 0º??? I know, I know, I'm stuck in SH1, but some of those features were so convenient! :p

Yes, the command is called view_to_heading in the cfg file and should be the - key (not the keypad one).

Sub Sailor · 03-06-08, 09:00 AM

I here the sound of the scope going up and down, but never see any thing. Is the depth different for this scope or do I have a problem? The attack scope is fine.

Ron Banks MMCM(SS), USN(Ret)

Quillan · 03-06-08, 09:30 AM

Here's the trick to shooting down the planes:

Don't do it yourself. Let the crew take care of it.

In the crew screen, put crew on the AA guns, then either command Battle Stations or Man the AA guns. Click on Fire At Will, and let them go to it. You may have to use your binoculars to look at one of the planes and hit the spacebar to get them to start firing, but after that they should handle it themselves. The crew are far more accurate than I could ever be.

Sailor Steve · 03-06-08, 10:02 AM

Quote:

Originally Posted by Sub Sailor

I here the sound of the scope going up and down, but never see any thing. Is the depth different for this scope or do I have a problem? The attack scope is fine.

Ron Banks MMCM(SS), USN(Ret)

Opposite buttons. One is Page-Up and Page-Down, the other is Insert and Delete. If you're in one and hit the buttons for the other you'll here it go, but won't see it.

Sub Sailor · 03-08-08, 06:16 PM

With your help I got the first three training lesson completed and I have played them several times now. I have practiced my navigation and using the tool. Just generally getting a feel for the sim. I feel I got them down pretty well.
I was able by using Auto-Crew to get the airplanes. Now I am hung up on lesson 4, The Convoy, sink 10,000 tons of merchant shipping. I keep getting sunk but I don't why. I use my sonar and my scope and all of a sudden I am up to my arm pits in damage. I have at least hit some stuff but never completed.
Can anyone help?

Ron Banks, MMCM(SS), USN(Ret)

Sub Sailor · 03-08-08, 06:26 PM

A gentleman on the forums page sent me a procedure for setting up the sound and WOW I got sound, in fact the best I ever had. I did not know all the different controls that were available. I almost get blown out of the chair now.

Thanks everyone,

Ron Banks MMCM(SS), USN(Ret)

osirvio · 03-11-08, 12:35 PM

What key is for the command "All Stop"?

Manual says "~", but i have to press Alt to get that.

03-05-08, 10:52 AM	#1
Sub Sailor Commander Join Date: Sep 1999 Location: Orofino, Idaho Posts: 443 Downloads: 66 Uploads: 0	Basic Help I just got the simulation yesterday and starting the training missions. Is it possible to make VERY MINOR couese changes in SHIV. If I use Hard Rudder I am just to dam old and slow to catch it with Rudder Amidship. Can any pody give me some pointers? I must be really slow but on the Navigation Training, but is the designated zone the flag? Ron Banks MMCM(SS), USN(Ret) A Really Old Nuke

03-05-08, 11:04 AM	#2
fred8615 Saint of the seas Join Date: Mar 2004 Location: Sorrento, Louisiana Posts: 1,320 Downloads: 265 Uploads: 127	Click the button right underneath the compass. That changes it to a gauge that gives you finer helm control. __________________ Frederick J. Barnett Radio Stations & Music Captain's Desk Photos FJB Camera Pre Pearl Harbor Career Start Office links, Info Boxes, & 50 cal Crew Rank Fix Sub Class Info Real Subs SH4 Randomizer Sub Images Office Images Sub Pinups & Pics 24 Hour Clocks Office Posters Nav Map Make-Over Add-ons FJB Navigation Maps Office Window Chronographs Someone's got to take the responsibility if the job's going to get done! Do you think that's easy?! - Gregory Peck, The Guns of Navarone.

03-05-08, 11:43 AM	#5
JREX53 Frogman Join Date: Jan 2006 Posts: 300 Downloads: 353 Uploads: 13	peabody, MMCM(SS) (RET), means he is a Retired Master Chief Machinist Mate qualified in submarines. __________________ Jim

03-05-08, 02:34 PM	#7
Major Johnson Frogman Join Date: May 2007 Location: Jeresey Shore USA Posts: 288 Downloads: 25 Uploads: 0	I like this guy, he got the sim yesterday, and he's got 480 some odd posts! Ok, maybe he's got SH3, or maybe he's just a member. Point being, here I am with a little over 120 posts, bought the game when it first came out and I can relate to his plight! I agree with peabody, the manual is useless, and the steep learning curve is what's kept me away from the game for so long. Personally I liked how they had it in SH1 where you could use the left/right arrow buttons and they would increment in 5 degrees until you got to 35 degrees in one direction or the other. I find that quicker than using the mouse and fumbling for the compass. And the up and down arrows worked for setting bow and stern planes so that the boat would angle the boat up or down, rather than having to specify a depth right away. I would give the order to dive the boat, then go to the control room and then decide my depth. But I do like the tip about the + key being used to direct the boat in the direction your looking! I'm going to try that one out tonight!! Is there a key function that automatically sets the view to 0º??? I know, I know, I'm stuck in SH1, but some of those features were so convenient! :p __________________ MJ! ASUS Sabertooth 990FX R2.0 AMD FX8350 8 Core 4.0 Ghz CPU GeForce GTX 560 Ti PCIx Video Card 8 GB Corsair Vengence RAM Rosewill 850W Power Supply

03-06-08, 09:00 AM	#10
Sub Sailor Commander Join Date: Sep 1999 Location: Orofino, Idaho Posts: 443 Downloads: 66 Uploads: 0	Observation Scope I here the sound of the scope going up and down, but never see any thing. Is the depth different for this scope or do I have a problem? The attack scope is fine. Ron Banks MMCM(SS), USN(Ret)

03-05-08, 11:08 AM	#3
Zantham 中国水兵 Join Date: Feb 2007 Location: Canada Posts: 283 Downloads: 63 Uploads: 1	I doubt you can get it accurate to a degree, but you can click with your mouse on the compass on the bottom of the screen to select a new heading, its pretty easy to get within a few degrees doing this, or you can click below the compass and change the display to a rudder control, and you can click this to give you pretty good control over how fast you turn. There is no keys I've found that do any more than apply full rudder either way, and center rudder.

03-05-08, 12:01 PM	#6
Yanaran Watch Join Date: Apr 2007 Posts: 29 Downloads: 0 Uploads: 0	Another good command to know is "heading to view" (+). It turns the boat in the direction you're looking. I use it mostly when already engaged in combat but it's useful for making small corrections to course for example when lining up a shot. Say you've decided to line up straight north and click the compass and end up with 358 degrees. Instead of trying to click 0 degrees with the mouse I just go to periscope, point it 2 degrees to starboard and hit heading to view (after the boat has already lined up at 358 of course).

03-05-08, 03:44 PM	#8
Zantham 中国水兵 Join Date: Feb 2007 Location: Canada Posts: 283 Downloads: 63 Uploads: 1	Yes there is a set heading to view, and there is a set view to heading key... and if I was at home I could even tell you what it was!!!

03-06-08, 09:30 AM	#11
Quillan Samurai Navy Join Date: Apr 2005 Posts: 579 Downloads: 2 Uploads: 0	Here's the trick to shooting down the planes: Don't do it yourself. Let the crew take care of it. In the crew screen, put crew on the AA guns, then either command Battle Stations or Man the AA guns. Click on Fire At Will, and let them go to it. You may have to use your binoculars to look at one of the planes and hit the spacebar to get them to start firing, but after that they should handle it themselves. The crew are far more accurate than I could ever be. __________________ We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, that we are now qualified to do anything with nothing.

03-08-08, 06:16 PM	#13
Sub Sailor Commander Join Date: Sep 1999 Location: Orofino, Idaho Posts: 443 Downloads: 66 Uploads: 0	I need more help With your help I got the first three training lesson completed and I have played them several times now. I have practiced my navigation and using the tool. Just generally getting a feel for the sim. I feel I got them down pretty well. I was able by using Auto-Crew to get the airplanes. Now I am hung up on lesson 4, The Convoy, sink 10,000 tons of merchant shipping. I keep getting sunk but I don't why. I use my sonar and my scope and all of a sudden I am up to my arm pits in damage. I have at least hit some stuff but never completed. Can anyone help? Ron Banks, MMCM(SS), USN(Ret)

03-08-08, 06:26 PM	#14
Sub Sailor Commander Join Date: Sep 1999 Location: Orofino, Idaho Posts: 443 Downloads: 66 Uploads: 0	Got my sound fixed. A gentleman on the forums page sent me a procedure for setting up the sound and WOW I got sound, in fact the best I ever had. I did not know all the different controls that were available. I almost get blown out of the chair now. Thanks everyone, Ron Banks MMCM(SS), USN(Ret)

03-11-08, 12:35 PM	#15
osirvio Swabbie Join Date: Mar 2007 Posts: 11 Downloads: 0 Uploads: 0	What key is for the command "All Stop"? Manual says "~", but i have to press Alt to get that.