Realism- and gameplay-related hardcode fixes for SH3.EXE - Page 261

Darojax · 06-04-15, 07:51 AM

Quote:

Originally Posted by GOZO

I still have trouble with AVG

. It just removes the SH3.exe treating it as a virus after I moved it into my real Sh3 folder and try to run it.

You have to choose between :

"
-Even if this file is moved to a new location

-Even if this file has been changed or updated"

Any ideas?

Have you tried adding the whole SH3 folder as an exception? Select "Folder" in the exception type dropdown menu.

bstanko6 · 06-05-15, 12:13 AM

Finally after all this time, even with Blitzkrieg's help. I got the patch to work! Blitz if you are reading this, thank you for your patience. Even though you helped me out awhile ago, I could not figure this thing out. But after reading your posts with others, rereading the manual, I got it! It is very impressive. The fact that the water covers the scope after 4 knots knocked me over! Then I got the messages to work for the wolfpack. The chief calls out 20% oxygen left! Every test for this patch has passed.

I learned one major thing though... AVG protection is the archenemy of h.sie patch! Don't even bother trying to get around it, or using exceptions... it's a time bomb. I have reinstalled more times than I want to admit. I had to keep several copies of sh3 on my computer just in case. Get rid of AVG and you will have a much easier time using this patch.

This leaves me with only one question regarding testing the wolfpack mod.
The manual says to load up the single mission "wolfpack" and once you send the contact report, it will send you a message back. If the message is to attack the convoy alone, then you are to try again. But if the BDU message tells you something like shadow the convoy, then it is working! I did not have time to continue testing as I am now at work

The first test I did told me to maneuver freely to attack, I assume no wolfpack! I was able to test again, and the message was to "maintain contact and report every hour"...

Is that a positive test that the wolfpack exists?

Looking forward to the comments.

Thank you Blitzkrieg!

sublynx · 06-05-15, 06:53 AM

Quote:

Originally Posted by bstanko6

The first test I did told me to maneuver freely to attack, I assume no wolfpack! I was able to test again, and the message was to "maintain contact and report every hour"...

Is that a positive test that the wolfpack exists?

Yes it is. Congrats

bstanko6 · 06-05-15, 01:35 PM

Thanks sub Lynx. Appreciate it.

niwo · 07-02-15, 11:11 AM

I have a little issue with some functions not working properly.
When I untick some bits in the stiebler mod section like minimum tc and change patrol grid, the patch is still in game. I cannot alter the hotkey for request new grid and minimum tc (I dont konw the name and MnID) also. heres the part for it from the commands_de:

[Cmd455]
Name=Request_New_grid
Ctxt=1
MnID=0x3F290006
Key0=0x4D,cs,"STRG SHIFT M"

Cmd 455 is free and the key combo is unused,too.
But its still Shift+M and that somehow gets activated when I enter the capital M in the savegame textbox.

I have redone the patch install procedure several times with no luck.
I'm playing LSHV15 on Win7 64bit with the sh3.exe patched to large adress allocation of course and with the following mods :

Due to limitations i cannot post my menu_1024_768.ini or the whole commands.ini here nor on pastebin.

I can disable some patches like The surrender option that causes a ctd when the boat is destroyed.

Something is very weird here.
Maybe someone could get me the missing link

Thanks

La vache · 07-02-15, 04:56 PM

"Shift+N" is used for "Rise UZO" and "min TC" of the Stiebler patch. "Shift+N" is hard-coding in the Stiebler patch.
They should change commands:

[Cmd118]
Name=Rise_UZO
Ctxt=1
Key0=0x55,Cs,"Shift+U"

[Cmd119]
Name=Lower_whole_UZO
Ctxt=1
Key0=0x55,Cc,"Ctl+U"

"Shift+M" is not occupied in LSHV15.

La vache

niwo · 07-02-15, 07:12 PM

Hi, thanks for the answer.

I did change the UZO keys exactly that way, but they do not respond.

Shift+n should only apply when in navigation map, but it does it everywhere.
As i wrote, i can uncheck the tickbox in the optionselector, but this does have no effect.

Its like some sections of the commands.cfg are not recognized.

The biggest problem is that the request new grid calls even when i have paused the game.
I changed it to C+S+M but its still S+M

This is the section of the menu_1024*

Im stuck

Anvart · 07-06-15, 12:34 PM

Quote:

Originally Posted by niwo

...

I did change the UZO keys exactly that way, but they do not respond.
...

Look where need change:
http://www.subsim.com/radioroom/show...3&postcount=80
[Cmd250]

niwo · 07-09-15, 01:53 PM

Quote:

Originally Posted by Anvart

Look where need change:
http://www.subsim.com/radioroom/show...3&postcount=80
[Cmd250]

Doesn't work either, sorry. In fact, commenting things out had messed things up. Keys got scrambled around.
Something really weird is happening.

I recovered an old verion of my commands_de.cfg and will go on without stiebler patches. Pity but the only way at this time.

EDIT:
Ok, I have managed to set the proper keys -=> CTRL/Shift+U to rise and lower the uzo.

But i still cannot disable the minimum tc and request new grid patches. Some other options like the rate of the min tc are working.

Hmm. I hardly believe I must do something wrong, but what is it

Anvart · 07-11-15, 11:48 AM

Hi, niwo.

I use the original LSH3_2015 of the basic version without additional mods.
I don't use Stiebler's hardcode... and I turned off h.sie's radar-Fix. I did a full Commands_en.cfg from german's variant. I changed the command logic of UZO raising\lowering and have removed the repetition "Yes Sir!". I changed work of KDB hydrophone (now it works synchronously with the sensor/controller as in my old mod), remade raising\lowering of the radar antenna (as in my old mod)... and so on.
The parts of LSH3_2015, changed by me, are working without problems.

Regards, Alex.

niwo · 07-15-15, 02:37 PM

I have another Issue

Stiebler writes in his post Continuation of H.sie's patches by Stiebler.

Quote:

No longer! Now you 'pseudo-dock' at the U-tanker. When you are close enough, you press ESCAPE, then 'Exit Patrol', just as if you were planning to dock.
However... when you are asked 'Continue mission' or 'Dock at U-463' (for example), you click on 'Continue Mission'. *Now* you carry on your patrol with the same torpedo load-out that you had when you reached the U-tanker, you retain the patrol grid details, you receive some repairs to your hull-integrity (but not to equipment) and you receive a fuel upgrade, of up to 30% of the full capacity. (So if you had 50% fuel when you docked, you will now have 80% fuel.)

Unlike conventional docking at a base, pseudo-docking is only possible if there is no 'heavy fog' and windspeed must be 10 m/s or less. Also, you can only pseudo-dock at U-tankers, not at surface tankers (eg Brake, or Charlotte Schliemann), nor at land bases.

Pseudo Dock didn't work for me. I tried at U461 in PQ BD76 around 30th september 42 for several day due to winds of and above 10m/s. I had one g7e in the external aft storage but however; I met all the things mentioned above. No fuel change, no new torps.

Any thoughts?

felix2000 · 09-15-15, 07:01 PM

Hello! I have an issue:

When I send a contact or a patrol report, the BdU sends me a message with nothing wrote in it. Why is this happening?

Magic1111 · 09-16-15, 02:27 AM

Quote:

Originally Posted by felix2000

When I send a contact or a patrol report, the BdU sends me a message with nothing wrote in it. Why is this happening?

Do you have made the needed entries from the h.sie Patch in your de_Menu.txt or en_Menu.txt?

felix2000 · 09-16-15, 08:33 AM

Quote:

Originally Posted by Magic1111

Do you have made the needed entries from the h.sie Patch in your de_Menu.txt or en_Menu.txt?

I skipped that step. Thank you!

Magic1111 · 09-16-15, 09:01 AM

Quote:

Originally Posted by felix2000

I skipped that step. Thank you!

You´re welcome!

06-05-15, 12:13 AM	#3902
bstanko6 Admiral Join Date: Feb 2015 Location: Murwik Naval Academy Posts: 2,130 Downloads: 390 Uploads: 13	Finally after all this time, even with Blitzkrieg's help. I got the patch to work! Blitz if you are reading this, thank you for your patience. Even though you helped me out awhile ago, I could not figure this thing out. But after reading your posts with others, rereading the manual, I got it! It is very impressive. The fact that the water covers the scope after 4 knots knocked me over! Then I got the messages to work for the wolfpack. The chief calls out 20% oxygen left! Every test for this patch has passed. I learned one major thing though... AVG protection is the archenemy of h.sie patch! Don't even bother trying to get around it, or using exceptions... it's a time bomb. I have reinstalled more times than I want to admit. I had to keep several copies of sh3 on my computer just in case. Get rid of AVG and you will have a much easier time using this patch. This leaves me with only one question regarding testing the wolfpack mod. The manual says to load up the single mission "wolfpack" and once you send the contact report, it will send you a message back. If the message is to attack the convoy alone, then you are to try again. But if the BDU message tells you something like shadow the convoy, then it is working! I did not have time to continue testing as I am now at work The first test I did told me to maneuver freely to attack, I assume no wolfpack! I was able to test again, and the message was to "maintain contact and report every hour"... Is that a positive test that the wolfpack exists? Looking forward to the comments. Thank you Blitzkrieg! __________________ [SIGPIC][/SIGPIC] BSTANKO6'S SH5 NAVAL ACADEMY http://www.youtube.com/channel/UCPbe...W2NArCA/videos DISCORD https://discord.gg/6tFeTSUmVc

06-05-15, 01:35 PM	#3904
bstanko6 Admiral Join Date: Feb 2015 Location: Murwik Naval Academy Posts: 2,130 Downloads: 390 Uploads: 13	Thanks sub Lynx. Appreciate it. __________________ [SIGPIC][/SIGPIC] BSTANKO6'S SH5 NAVAL ACADEMY http://www.youtube.com/channel/UCPbe...W2NArCA/videos DISCORD https://discord.gg/6tFeTSUmVc

07-02-15, 11:11 AM	#3905
niwo A-ganger Join Date: Aug 2009 Location: 51° 31′ N, 7° 28′ E Posts: 76 Downloads: 158 Uploads: 0	I have a little issue with some functions not working properly. When I untick some bits in the stiebler mod section like minimum tc and change patrol grid, the patch is still in game. I cannot alter the hotkey for request new grid and minimum tc (I dont konw the name and MnID) also. heres the part for it from the commands_de: [Cmd455] Name=Request_New_grid Ctxt=1 MnID=0x3F290006 Key0=0x4D,cs,"STRG SHIFT M" Cmd 455 is free and the key combo is unused,too. But its still Shift+M and that somehow gets activated when I enter the capital M in the savegame textbox. I have redone the patch install procedure several times with no luck. I'm playing LSHV15 on Win7 64bit with the sh3.exe patched to large adress allocation of course and with the following mods : Generic Mod Enabler - v2.6.0.157 [G:\SilentHunterIIILSHV15\MODS] _LSH3-2015___FULLVERSION _LSH3-2015__Addon_SH3-ClassicDials Audio RadioMessage - MorseCodeOnly Bearded faces _LSH3-2015__HistoricalMessages Niwo's Keyboard Niwo's Map Cfg Niwo's Map Cursors Niwo's Map Night Filter Moon Niwo's Sensors Niwo's Torpedo Prices _LSH3-2015_GUI_OLC _LSH3-2015_GUI_OLC_WIDESCREEN Audio Default Crew Accurate Bismark Longer_Wakes_for_all Audio Creaks Niwo's Swastikas _LSH3-2015_SLS_SpecialEffectsBig _LSH3-2015__ExtendedChallenge _LSH3-2015__ExtentedChallengeBlackContacts Niwo's Sound fix GridXXXX O2-Gauges v2 OLC stock Binocular SHIII Flags_enlighten Audio Ringing Telegraph Bowspray_V_1.2 _LSH3-2015_ATM_GreenWater _LSH3-2015_ATM_GreenWater-SunFix GWX-No Tail_NoColored WarShip Niwo's NoShiptype on Map Audio Silent Sea Niwo's Deckgun Optic SH3 Original Niwo's UZO default for OLC Audio No Cheers Niwo's No LSH ScreenLogo Pinup Girls Mod - Babydoll _LSH3-2015___Patch_HSIE-V16B1 _Stiebler4C_V16B1 _Stiebler4B_Addon_for_V16B1 _SH3 Log v1.0 Stiebler compatible Due to limitations i cannot post my menu_1024_768.ini or the whole commands.ini here nor on pastebin. I can disable some patches like The surrender option that causes a ctd when the boat is destroyed. Something is very weird here. Maybe someone could get me the missing link Thanks __________________ My System Specs Last edited by niwo; 07-02-15 at 11:56 AM.

07-02-15, 04:56 PM	#3906
La vache Soundman Join Date: Nov 2012 Posts: 142 Downloads: 205 Uploads: 0	"Shift+N" is used for "Rise UZO" and "min TC" of the Stiebler patch. "Shift+N" is hard-coding in the Stiebler patch. They should change commands: [Cmd118] Name=Rise_UZO Ctxt=1 Key0=0x55,Cs,"Shift+U" [Cmd119] Name=Lower_whole_UZO Ctxt=1 Key0=0x55,Cc,"Ctl+U" "Shift+M" is not occupied in LSHV15. La vache __________________ youtube

07-02-15, 07:12 PM	#3907
niwo A-ganger Join Date: Aug 2009 Location: 51° 31′ N, 7° 28′ E Posts: 76 Downloads: 158 Uploads: 0	Hi, thanks for the answer. I did change the UZO keys exactly that way, but they do not respond. Shift+n should only apply when in navigation map, but it does it everywhere. As i wrote, i can uncheck the tickbox in the optionselector, but this does have no effect. Its like some sections of the commands.cfg are not recognized. The biggest problem is that the request new grid calls even when i have paused the game. I changed it to C+S+M but its still S+M This is the section of the menu_1024* [G3F I140] Name=Request_New_grid Type=1032;Button ItemID=0x3F290006 ParentID=0x3F290000 Pos=52,0,26,26 Materials=4 Display=2 Mat 0=data/menu/gui/layout/orders2.tga Crop 0=0.476563,0.5,0.234375,0.1171875 Mat 1=data/menu/gui/layout/orders2.tga Crop 1=0.476563,0.5,0.234375,0.1171875 Mat 2=data/menu/gui/layout/orders2.tga Crop 2=0.476563,0.5,0.234375,0.1171875 Mat 3=data/menu/gui/layout/orders2.tga Crop 3=0.476563,0.5,0.234375,0.1171875 MatFlags=0x1 TexFmt=0x9 Font=1 TextFlags=0x0 StatesColors=0xB0B0B0FF,0xFF,0xFFFFFFFF,0xFFFFFFFF ToolTipText=2919 Im stuck __________________ My System Specs Last edited by niwo; 07-02-15 at 07:30 PM.

07-11-15, 11:48 AM	#3910
Anvart Admiral Join Date: Jan 2006 Location: Russia ® Posts: 2,492 Downloads: 122 Uploads: 1	Hi, niwo. I use the original LSH3_2015 of the basic version without additional mods. I don't use Stiebler's hardcode... and I turned off h.sie's radar-Fix. I did a full Commands_en.cfg from german's variant. I changed the command logic of UZO raising\lowering and have removed the repetition "Yes Sir!". I changed work of KDB hydrophone (now it works synchronously with the sensor/controller as in my old mod), remade raising\lowering of the radar antenna (as in my old mod)... and so on. The parts of LSH3_2015, changed by me, are working without problems. Regards, Alex. __________________ Alex ® Moses said: "Don't create yourself an idol"...

09-15-15, 07:01 PM	#3912
felix2000 Nub Join Date: Jan 2015 Posts: 2 Downloads: 126 Uploads: 0	Hello! I have an issue: When I send a contact or a patrol report, the BdU sends me a message with nothing wrote in it. Why is this happening?