GWX (Grey Wolves eXpansion Mod) - Page 51

danlisa · 02-22-07, 07:51 AM

@U48

I appreciate your opinion/reasoning & views.

However, this thread is here to provide release details and support for the 1.02 Patch.

If you wouldn't mind, this topic is better served in it's own thread.

Please don't take this the wrong way, we just need to keep this thread on track for anyone wanting to find information about the Patch.

Thank You.

jaxa · 02-22-07, 11:23 AM

Quote:

Originally Posted by Dowly

That´s the first time I heard that Finland surrendered... few veterans would have something to say about that.

Peace treaty my friend.

You have right, Dowly

Do you know that Polish Samodzielna Brygada Strzelców Podhalańskich (mountain infantry brigade) had to help Finnland during war against USSR in 1940? Unfortunately, before this mission Hitler attacked Norway and SBSP fought in Narvik.

Von Walrus · 02-23-07, 03:44 AM

HI all.

Re-installed SH3 after finding out about and downloading this mod. Clean install, patched to 1.4b, ran GWX.exe on top of that to install it.

My PC now crashes and reboots one minute into the first Naval Academy mission and within a minute of starting a career in port. I've tried it with the lite harbour mod enabled too.

Gutted

P4 3ghz
1gb Ram
Geforce 6800 128mb
Motherboard-based 5.1 sound.
All drivers bang up-to-date.

Anyone else have this sort of problem and is there a solution?

Thanks in advance.

danlisa · 02-23-07, 03:53 AM

Welcome Von Walrus

If you click on my sig you will reach the GWX website, there you will find the needed files for GWX & the 1.02 Patch.

You need a 'clean' SH3 + 1.4b as a base installation.

You need the:

GWX.exe Installer
GWX-1.bin
GWX-2.bin
GWX-3.bin
GWX-4.bin
GWX-5.bin

Put the above 6 files in a folder together and run the installer.

Then d/l the GWX 1.02 Patch and run it.

This will give you a standard GWX installation.

There are additional files if you are using SH3Cmdr and also a MD5 Compare program which allows you to check your downloaded files to make sure they are not corrupted.

Please note, you will not be able to continue your current career.

Good luck.

Jimbuna · 02-23-07, 04:25 AM

Welcome aboard kaleun Von Walrus

@danlisa
Is that the updated spysat mod in your sig :hmm:

danlisa · 02-23-07, 04:33 AM

Quote:

Originally Posted by jimbuna

Welcome aboard kaleun Von Walrus

@danlisa
Is that the updated spysat mod in your sig :hmm:

Nope, it will be removed/renamed as soon as the new one is ready. Besides, not everyone is on V1.02 yet.

Jimbuna · 02-23-07, 05:16 AM

Quote:

Originally Posted by danlisa

Quote:

Originally Posted by jimbuna

Welcome aboard kaleun Von Walrus

@danlisa
Is that the updated spysat mod in your sig :hmm:

Nope, it will be removed/renamed as soon as the new one is ready. Besides, not everyone is on V1.02 yet.

Tell me about it...I'm more in my PM box than on the site now

How about an automated response with one of mr c's RTFM

Von Walrus · 02-23-07, 07:09 AM

Quote:

Originally Posted by danlisa

Welcome Von Walrus

If you click on my sig you will reach the GWX website, there you will find the needed files for GWX & the 1.02 Patch.

You need a 'clean' SH3 + 1.4b as a base installation.

You need the:

GWX.exe Installer
GWX-1.bin
GWX-2.bin
GWX-3.bin
GWX-4.bin
GWX-5.bin

Put the above 6 files in a folder together and run the installer.

Then d/l the GWX 1.02 Patch and run it.

Jawohl, Herr Kaleun

(I'll do it when I get home tonight)

Jimbuna · 02-23-07, 08:04 AM

Sorry for butting in but also...if your gonna use SH3Cmdr, dont forget the GWXv102cfg4SH3cmdr file

Available from either Dans or my sigs

danlisa · 02-23-07, 08:13 AM

Quote:

Originally Posted by jimbuna

Sorry for butting in but also...if your gonna use SH3Cmdr, dont forget the GWXv102cfg4SH3cmdr file

Available from either Dans or my sigs

Um Jim, post 754

(how much longer till I get rid of The Old Man Avatar?)

Jimbuna · 02-23-07, 08:34 AM

Quote:

Originally Posted by danlisa

Quote:

Originally Posted by jimbuna

Sorry for butting in but also...if your gonna use SH3Cmdr, dont forget the GWXv102cfg4SH3cmdr file

Available from either Dans or my sigs

Um Jim, post 754

(how much longer till I get rid of The Old Man Avatar?)

Sorry mate...still can't see any specific reference to cfg...unless your meaning the 'GWX website'

As for the avatar...feck naas...I'm waiting of you reaching something more appropriate like the wild night at langleys or whatever :rotfl:
Unless of course it's already been and gone :hmm:

danlisa · 02-23-07, 08:41 AM

Don't know about Langleys but had the other one.

Quote:

Originally Posted by danlisa

There are additional files if you are using SH3Cmdr and also a MD5 Compare program which allows you to check your downloaded files to make sure they are not corrupted.

Hell, it never hurts to reiterate something, people might actually start taking notice.

u48 · 02-23-07, 11:23 AM

Quote:

Originally Posted by danlisa

Hell, it never hurts to reiterate something, people might actually start taking notice.

1. How many of you guys play GWX Multiplayer ?
2. Why does the stealth meter in GWX Multiplayer only change colour for the host and NOT for the other players, when in out of the box SH3 it changes colour for ALL the players ?
3. Does anybody have an answer/solution/fix for this problem?
4. From March 1st " OFFICIAL " GWX Stats start at WPL
http://www.subsim.com/radioroom/showthread.php?t=104427

Look forward to seeing some of you guys @ WPL for GWX Stats.........Salute !

badhat17 · 02-23-07, 04:31 PM

Quote:

Originally Posted by u48

Quote:

Originally Posted by danlisa

Hell, it never hurts to reiterate something, people might actually start taking notice.

1. How many of you guys play GWX Multiplayer ?
2. Why does the stealth meter in GWX Multiplayer only change colour for the host and NOT for the other players, when in out of the box SH3 it changes colour for ALL the players ?
3. Does anybody have an answer/solution/fix for this problem?
4. From March 1st " OFFICIAL " GWX Stats start at WPL
http://www.subsim.com/radioroom/showthread.php?t=104427

Look forward to seeing some of you guys @ WPL for GWX Stats.........Salute !

Stealth meter ? .. Good grief

Try playing like a man .

danlisa · 02-23-07, 04:45 PM

Quote:

Originally Posted by u48

2. Why does the stealth meter in GWX Multiplayer only change colour for the host and NOT for the other players, when in out of the box SH3 it changes colour for ALL the players ?
3. Does anybody have an answer/solution/fix for this problem?

This is a stock bug and has been present since the release of the game.

Detection will not change the stealth meter.
Pinging 'should' change the stealth meter.

For all players not just the host.

02-22-07, 07:51 AM	#751
danlisa Navy Seal Join Date: Oct 2005 Location: Cornwall, UK Posts: 5,499 Downloads: 45 Uploads: 1	@U48 I appreciate your opinion/reasoning & views. However, this thread is here to provide release details and support for the 1.02 Patch. If you wouldn't mind, this topic is better served in it's own thread. Please don't take this the wrong way, we just need to keep this thread on track for anyone wanting to find information about the Patch. Thank You. __________________

02-23-07, 03:53 AM	#754
danlisa Navy Seal Join Date: Oct 2005 Location: Cornwall, UK Posts: 5,499 Downloads: 45 Uploads: 1	Welcome Von Walrus If you click on my sig you will reach the GWX website, there you will find the needed files for GWX & the 1.02 Patch. You need a 'clean' SH3 + 1.4b as a base installation. You need the: GWX.exe Installer GWX-1.bin GWX-2.bin GWX-3.bin GWX-4.bin GWX-5.bin Put the above 6 files in a folder together and run the installer. Then d/l the GWX 1.02 Patch and run it. This will give you a standard GWX installation. There are additional files if you are using SH3Cmdr and also a MD5 Compare program which allows you to check your downloaded files to make sure they are not corrupted. Please note, you will not be able to continue your current career. Good luck. __________________

02-23-07, 04:25 AM	#755
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 190,539 Downloads: 63 Uploads: 13	Welcome aboard kaleun Von Walrus @danlisa Is that the updated spysat mod in your sig :hmm: __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!!

02-23-07, 08:04 AM	#759
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 190,539 Downloads: 63 Uploads: 13	Sorry for butting in but also...if your gonna use SH3Cmdr, dont forget the GWXv102cfg4SH3cmdr file Available from either Dans or my sigs __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!!

02-23-07, 03:44 AM	#753
Von Walrus Nub Join Date: Feb 2007 Posts: 3 Downloads: 0 Uploads: 0	HI all. Re-installed SH3 after finding out about and downloading this mod. Clean install, patched to 1.4b, ran GWX.exe on top of that to install it. My PC now crashes and reboots one minute into the first Naval Academy mission and within a minute of starting a career in port. I've tried it with the lite harbour mod enabled too. Gutted P4 3ghz 1gb Ram Geforce 6800 128mb Motherboard-based 5.1 sound. All drivers bang up-to-date. Anyone else have this sort of problem and is there a solution? Thanks in advance.