[REL] Rising/Lowering SD antenna ... ? - Page 7

Breeze · 03-28-08, 03:20 PM

Thank you that is it I am now working with the one radar you rock

aanker · 03-28-08, 08:34 PM

Glad to hear it Breeze!! ... Anvart is the one who rocks ... this was his discovery ;-)

Happy Hunting!

Art

PS: anyone else:

Breeze · 03-28-08, 08:53 PM

So this radar only finds planes and to get the SJ radar finds surface ships?

LukeFF · 03-28-08, 08:56 PM

Quote:

Originally Posted by Breeze

So this radar only finds planes and to get the SJ radar finds surface ships?

Ehm, that's what aanker's picture shows!

Breeze · 03-28-08, 09:51 PM

Well the pic shows that cause its the first sub, but I read it has SJ radar as well which i think is surface ships ?

SeniorSpan · 04-11-08, 09:39 AM

G'day all,

Being able to raise and lower the SD mast while submerged is, INMO, a "must have" mod and I was very happy to stumble into this post, thx Anvart.

Having said that, I found this post after loading the 1.5 patch, but applied Anvart's mod with JSGME anyway, of course it did not work so I removed it with JSGME. Then I read the post by aanker and decided to give his method a go.

When I opened the commands.cfg and the menu.txt files aanker's suggested changes were already in place.

I then backed out the majority of mods, leaving historic 4 blade props, sober's sand, mts, and beter compass, and black smoke. I re-applied the Anvart's mod and started SH4 when I get to the menu page to select what I want to do, Sub School, America Career, U-Boat career, ect. I found the word American was missing but career was still there and the was an empty slot where U-Boat Career should be in; going past that point will result in a crash. I used JSGME to remove the SD mod, American and U-Boat career now appear in the menu and the commands.cfg and menu txt files remain modified as suggested by Aanker.

I have no doubt I errored some place, but just can see where; suggestions?

Thx

Bob

aanker · 04-11-08, 01:20 PM

Hi Bob, I hope you saved the pristine clean untouched unmodified ver. 1.5 commands.cfg and menu.txt files. Somehow it looks like they are mixed up and maybe the JSGME isn't seeing the correct files? I don't know.

Anyway I would uninstall all mods that affect commands.cfg and menu.txt and start over. No changes should appear in the unmodified files and SH4 ver 1.5 should run good with all menus showing correctly etc. before you begin.

I'm not familiar with all your mods but you may need to (hand edit) - make changes to accomodate more than one mod in the commands.cfg and menu.txt files to the other mod before the other mod with these SD changes is installed wth the JSGME.

I hand edit everything in my installation the old fashoned way and although it is a lot of work I don't use the JSGME.... unbelievable right? lol ... (instead I make lots of backups)

Sorry, wish I could be of more help... and also for my convoluted attempt to explain this.

Art

SeniorSpan · 04-11-08, 06:05 PM

G'day,

Thx much for the detailed reply Art, it's much appreciated. Sadly, I must report, I did not back up commands.cfg and menu.txt before applying the SD mod for the first time, so I fear to correct the problem it's going to be a reload. A reload more than likely needs to be done anyway as I mistakenly added several 1.4 mods after appling the 1.5 patch.

I completely agree with adding mods "the old fashioned way", I think I just got lazy.

Again, thanks for the info.

Cheers

Bob

02-07-09, 03:26 PM

Quote:

Originally Posted by aanker

Quote:

Originally Posted by Breeze

I appreciate the speedy reply but I did put in my files and the only mod I have is the 360 degree chart in the charting room thats it. but when I added these files I keep crashing before the game actually loads??

OK Breeze,

This is for the 1.5 US Boats SH4 (add-on) not the German U-Boats. If you have SH4 ver 1.4 see page 1 of this thread and download the JSGME version he made.
-------
Backup a copy of your ver 1.5 Commands.cfg found in:
C:\Program Files\Ubisoft\Silent Hunter Wolves of the Pacific\Data\Cfg
to someplace safe.

Open Commands.cfg in the location above with a plain text editor like Notepad and find the line [Cmd158]
Paste a text version of this section (Edit that little section) to say:
[Cmd158]
Name=Toggle_snorkel
Ctxt=1
;Key0=0x59,,"Z"
Key0=0x58,sC,"Shift X"
-------
Backup a copy of your ver 1.5 Menu.txt found in:
C:\Program Files\Ubisoft\Silent Hunter Wolves of the Pacific\Data\Menu
to someplace safe.

Open Menu.txt in the location above with a plain text editor like Notepad and find the lines 4415 and 4416.
Edit those lines to say:

4415=Raising SD antenna!;Rising snorkel!
4416=Lowering SD antenna!;Lowering snorkel!
-------
Backup a copy of your Sensors_sub_US.sim found in:
C:\Program Files\Ubisoft\Silent Hunter Wolves of the Pacific\Data\Library\USSubParts
to someplace safe.
Hex edit your own or put Anvart's Sensors_sub_US.sim in:
C:\Program Files\Ubisoft\Silent Hunter Wolves of the Pacific\Data\Library\USSubParts
-------
Hope this works. If not, re-install your backups replacing these modified files and enjoy this great game ... !

Happy Hunting!

Art

not sure what the deal is but the download version was giving me nothing but CTD

i followed your instructions and redid my stock v1.5 files and then used anvarts sim file and everything works fine now. it raises and lowers by using the "shift+x" keys.

thanks for your very helpfull post and thank you anvart for giving us a great mod.

EDIT:

i think i found the problem with the download version, its got a typo error

it actually reads: 4415=Rising SD antenna!;Rising snorkel!

instead of correctly saying - 4415=Raising SD antenna!;Raising snorkel!

you must change the spelling for it to work

aanker · 02-09-09, 09:39 PM

Quote:

Originally Posted by WEBSTER

.......
EDIT:

i think i found the problem with the download version, its got a typo error

it actually reads: 4415=Rising SD antenna!;Rising snorkel!

instead of correctly saying - 4415=Raising SD antenna!;Raising snorkel!

you must change the spelling for it to work

Those shouldn't matter - they can say almost anything you want ....

The main thing is you got it to work.

Skwasjer posted how to edit your own sim file with S3D (once I gained some confidence using S3D I eventually did) ..... although the 1.4 version of the sim in Anvart's mod works just fine in 1.5.
http://www.subsim.com/radioroom/show...5&postcount=45

I really like, and have had a lot of fun with S3D. Everyone should keep it in their tool-kit - IMO

Happy Hunting!

Art

flyingdane · 02-10-09, 02:32 AM

Quote:

Originally Posted by LukeFF

Quote:

Originally Posted by Breeze

So this radar only finds planes and to get the SJ radar finds surface ships?

Ehm, that's what aanker's picture shows!

Dude When will Stop being a dick?.. Not every ones as smart as you

Besides thats What do you have to gain by talking to noobys that way?

People come to this web site for help not for lip, Not from you or anyone else.
I have been a member of this great fourm for a while, and what i don't like is poeple
talking out there ass EVEN IF they know what there talking about, Every body has there strong points and there weak points, And no where that i can find dose it say to treat new people or even old for that matter like you do,..I will give you this... Your clever" You know just what to say With out getting on the nerves of the mods.. But that don't make it right,...Dude take it easy on the noobs, show them that you know what your talking about with out making them wish theyed never found this web-site,.. As smart as you may be.. it don't make a hill of beans if noone wants to here you.

02-10-09, 03:34 AM

Quote:

Originally Posted by aanker

Quote:

Originally Posted by WEBSTER

.......
EDIT:

i think i found the problem with the download version, its got a typo error

it actually reads: 4415=Rising SD antenna!;Rising snorkel!

instead of correctly saying - 4415=Raising SD antenna!;Raising snorkel!

you must change the spelling for it to work

Those shouldn't matter - they can say almost anything you want ....

The main thing is you got it to work.

Art

well i was amazed as well that a simple typo was that critical but that was what was causing the CTD

i made the spelling correction and nothing else and CTD stopped and all works as it should.

EDIT: it turns out i had a corrupted file causing my issues and thats all it was.

keltos01 · 02-10-09, 06:25 AM

we had the same typo on the IJN snorkel, it says rising snorkel instead of raising..

keltos

aanker · 02-10-09, 01:52 PM

Quote:

Originally Posted by WEBSTER

Quote:

Originally Posted by aanker

Quote:

Originally Posted by WEBSTER

.......
EDIT:

i think i found the problem with the download version, its got a typo error

it actually reads: 4415=Rising SD antenna!;Rising snorkel!

instead of correctly saying - 4415=Raising SD antenna!;Raising snorkel!

you must change the spelling for it to work

Those shouldn't matter - they can say almost anything you want ....

The main thing is you got it to work.

Art

well i was amazed as well that a simple typo was that critical but that was what was causing the CTD

i made the spelling correction and nothing else and CTD stopped and all works as it should.

anyway if anyone wants a fixed jsgme download version that works i uploaded one to my filefront

I made it say, "Hard Boiled Egg" instead of Raising (Rising) but you get the point:

(I happened to be eating a hard boiled egg) The game or Menu.txt doesn't care what it says - with a few exceptions.

Anvart's 1.4 sim works with 1.5 but you must edit the changes into the 1.5 commands cfg - and also menu txt as described above.

As I said this is Anvart's outstanding mod not mine.

Happy Hunting!

Art

ancient46 · 02-11-09, 04:52 PM

There is a toggle switch command Toggle_snorkel that can be added to a button on the radar tab. the easiest way i know to do this is to use jimimadrid's Menumaker. I did and it works fine.

Warning: If the mod does not work take a look and see if the mast is out of the water with the external cam. You might have to adjust the " SnorkelDepth= (number in meters)" in the sub's NSS_(Your Sub's Class).cfg file to get the antenna out of water using a button. The button always takes the sub to the exact number in that file every time, if it takes the sub deeper than the mast can rise, the radar will not work

03-28-08, 03:20 PM	#91
Breeze Swabbie Join Date: Mar 2008 Posts: 13 Downloads: 3 Uploads: 0	Thank you that is it I am now working with the one radar you rock __________________ All men die, not all men really live. Breeze Last edited by Breeze; 03-28-08 at 04:45 PM.

03-28-08, 08:53 PM	#93
Breeze Swabbie Join Date: Mar 2008 Posts: 13 Downloads: 3 Uploads: 0	So this radar only finds planes and to get the SJ radar finds surface ships? __________________ All men die, not all men really live. Breeze

03-28-08, 09:51 PM	#95
Breeze Swabbie Join Date: Mar 2008 Posts: 13 Downloads: 3 Uploads: 0	Well the pic shows that cause its the first sub, but I read it has SJ radar as well which i think is surface ships ? __________________ All men die, not all men really live. Breeze

04-11-08, 09:39 AM	#96
SeniorSpan Mate Join Date: Jan 2007 Posts: 56 Downloads: 128 Uploads: 0	G'day all, Being able to raise and lower the SD mast while submerged is, INMO, a "must have" mod and I was very happy to stumble into this post, thx Anvart. Having said that, I found this post after loading the 1.5 patch, but applied Anvart's mod with JSGME anyway, of course it did not work so I removed it with JSGME. Then I read the post by aanker and decided to give his method a go. When I opened the commands.cfg and the menu.txt files aanker's suggested changes were already in place. I then backed out the majority of mods, leaving historic 4 blade props, sober's sand, mts, and beter compass, and black smoke. I re-applied the Anvart's mod and started SH4 when I get to the menu page to select what I want to do, Sub School, America Career, U-Boat career, ect. I found the word American was missing but career was still there and the was an empty slot where U-Boat Career should be in; going past that point will result in a crash. I used JSGME to remove the SD mod, American and U-Boat career now appear in the menu and the commands.cfg and menu txt files remain modified as suggested by Aanker. I have no doubt I errored some place, but just can see where; suggestions? Thx Bob __________________

04-11-08, 01:20 PM	#97
aanker Pacific Thunder Join Date: Apr 2004 Location: Yellow Sea Posts: 1,896 Downloads: 236 Uploads: 14	Hi Bob, I hope you saved the pristine clean untouched unmodified ver. 1.5 commands.cfg and menu.txt files. Somehow it looks like they are mixed up and maybe the JSGME isn't seeing the correct files? I don't know. Anyway I would uninstall all mods that affect commands.cfg and menu.txt and start over. No changes should appear in the unmodified files and SH4 ver 1.5 should run good with all menus showing correctly etc. before you begin. I'm not familiar with all your mods but you may need to (hand edit) - make changes to accomodate more than one mod in the commands.cfg and menu.txt files to the other mod before the other mod with these SD changes is installed wth the JSGME. I hand edit everything in my installation the old fashoned way and although it is a lot of work I don't use the JSGME.... unbelievable right? lol ... (instead I make lots of backups) Sorry, wish I could be of more help... and also for my convoluted attempt to explain this. Art Last edited by aanker; 04-11-08 at 01:30 PM.

03-28-08, 08:34 PM	#92
aanker Pacific Thunder Join Date: Apr 2004 Location: Yellow Sea Posts: 1,896 Downloads: 236 Uploads: 14	Glad to hear it Breeze!! ... Anvart is the one who rocks ... this was his discovery ;-) Happy Hunting! Art PS: anyone else:

04-11-08, 06:05 PM	#98
SeniorSpan Mate Join Date: Jan 2007 Posts: 56 Downloads: 128 Uploads: 0	G'day, Thx much for the detailed reply Art, it's much appreciated. Sadly, I must report, I did not back up commands.cfg and menu.txt before applying the SD mod for the first time, so I fear to correct the problem it's going to be a reload. A reload more than likely needs to be done anyway as I mistakenly added several 1.4 mods after appling the 1.5 patch. I completely agree with adding mods "the old fashioned way", I think I just got lazy. Again, thanks for the info. Cheers Bob __________________

02-10-09, 06:25 AM	#103
keltos01 Silent Hunter Join Date: Feb 2008 Location: Milan Italy Posts: 4,999 Downloads: 114 Uploads: 18	we had the same typo on the IJN snorkel, it says rising snorkel instead of raising.. keltos __________________ "Honorable Builder of Sinking Ships"

02-11-09, 04:52 PM	#105
ancient46 Officer Join Date: Apr 2008 Location: Pennsylvania Posts: 239 Downloads: 108 Uploads: 1	There is a toggle switch command Toggle_snorkel that can be added to a button on the radar tab. the easiest way i know to do this is to use jimimadrid's Menumaker. I did and it works fine. Warning: If the mod does not work take a look and see if the mast is out of the water with the external cam. You might have to adjust the " SnorkelDepth= (number in meters)" in the sub's NSS_(Your Sub's Class).cfg file to get the antenna out of water using a button. The button always takes the sub to the exact number in that file every time, if it takes the sub deeper than the mast can rise, the radar will not work