Slideout 4 Dials Mod! - Page 2

Spent · 01-24-06, 09:37 PM

you must edit the .cfgs not replace them totally.

Jmack · 01-24-06, 09:41 PM

nahhh ... lol ... my mistake

i put the 1024_768 in the wrong folder ...
i didnt replace the original files just made new ones to use
with mod enabler because he mades backups of them so if i need
them again i just have to disable the mod in question

works fine now

thanks

afterall ... with the right instructions editing the files is not so bad

P.S. : i dont seem to find the Boardinstrumente mod in the download section is it under another name ?

Mast · 01-26-06, 12:58 PM

Hi Sale,

Installed using your instructions and everything shows correctly. Two problems though, the compass doesn't move and the 260m is stuck at 129. The other two dials work (speed and shallow depth). Any help? I'm using it with no other mods.

Mast

FLB sale U-999 · 01-26-06, 05:55 PM

Hi Mast!

Ok, it could be very sure that u have not increased ur DialsNumber in the Dials.cfg, or there are two same [G3F IXXX] Numbers.....

U MUST TAKE THE NEXT IXXX Number for all new Blocks u put behind the last Original (Modded) Block in that section!

If there is a doubled IXXX Number, it will not work or will not Move like u say.....

PLEASE CHECK YOUR Entries again, or u can upload ur Dials.cfg and menu_1024_768.ini and i will take a look at it.

I am sure that there is something with double used IXXX Number....

TO ALL!!!

DO NOT JUST COPY ALL THE MENU_1024_768.INI ENTRIES I HAVE POSTET IN THE README!!! U MUST LOOK AT UR LAST [G3F IXXX] NUMBER AND THEN RENUMBER ALL NEW BLOCKS I HAVE POSTET IN THE README!

That is very important!

The Entries in the Dials.cfg is also very important to make no mistakes there.....

If nothing works....then upload these both Files and i can take a look into it!

I know it isn`t easy to install, but if everything is right, it works without any Problems!

The big Problem is just that there are a lot of different Mods which are affecting those two Files with new Entries.....

So i cannot just put my Files up, they would not Work properly on your Systems.....

Hope u can enjoy those 4 dials....

The 6 Dials Version has more Features that u will like!

Not long time anymore for release.....

Best wishes Sale

Mast · 01-27-06, 10:57 AM

Hey Sale,

Found two typos and corrected them.

One was missing a bracket and the other was an extra number that was removed.

All work now. Thank you!

Mast

Jochem · 01-28-06, 01:35 PM

...

Thank U FLB sale U-999 for this mod, it works perfectly. I is just sad for me to rename one by one the i3f cause the last mine was 286 ^^ Otherwise it is a great useful mod ! Thank U again mate. I have just 2 questions:

1/ I'm really interesting by your lower right gauges cause its looks very fine and well detailed. Where to find it plz ?
2/ I'am interesting too for delete like you the black transparent menu below. How to do it plz ?

Thank U gain. I'm really impatient to see your next promising mods !

...

01-28-06, 05:57 PM

They drastically increased my gameplay beauty, THANKS!

FLB sale U-999 · 01-29-06, 04:18 PM

Quote:

Originally Posted by Jochem

...

Thank U FLB sale U-999 for this mod, it works perfectly. I is just sad for me to rename one by one the i3f cause the last mine was 286 ^^ Otherwise it is a great useful mod ! Thank U again mate. I have just 2 questions:

1/ I'm really interesting by your lower right gauges cause its looks very fine and well detailed. Where to find it plz ?
2/ I'am interesting too for delete like you the black transparent menu below. How to do it plz ?

Thank U gain. I'm really impatient to see your next promising mods !

...

Hi!

Nice that u like it!

Ok, please just wait a week or two!
Then i will release my 6 Dials + New Peri&UZO Mod, for new gameplayfeeling!

There i will explain all that what is resposnible for getting slideout to work and a lot more!

U must understand that i have not a lot of time at the moment to finish all i am working now on, but i am on a very good way to release that all in the next 10 Days!

If u like the 4 Dials version, then u will love the new on!

Just a little bit patience and all will go good.

Greetings Sale

Mast · 01-30-06, 06:49 PM

I can't wait!!

Mast

Beltza · 01-31-06, 01:04 PM

Great mod! Congratulations.

I've adapted it to the 24th Flotilla Spanish Translation mod, and it is available at the 24th Flotilla ( www.24flotilla.com).

http://www.24flotilla.com/html/modul...wtopic&t=12898

Thanks FLB sale U-999

CCIP · 02-04-06, 11:34 AM

Installed and running smoothly. As always, you're the master of very clean, simple, and super-useful mods

FLB sale U-999 · 02-04-06, 03:00 PM

Hi CCIP!

Thanks for those compliments

Nice that somebody likes it!

Greetings Sale

don1reed · 02-06-06, 10:07 AM

Sale, you deserve sainthood.

You're a boon to us old salts in the "bi-focal" crowd.

I no longer have to press my face against the monitor to see the dang headings :rotfl: the next time I bump into Pope Benedict, I'll put in a good word for ye.

tnx,

FLB sale U-999 · 02-06-06, 01:25 PM

Hi!

No time in Vatican to play PC......

FLB sale U-999 · 02-06-06, 01:27 PM

Hi all!

This is an update for my 4 Dials Mod!

Update for the 260 meter Dial.

- overworked Textures, now with 10 meter steps.
- overworked pointer optical.
- corrected depthsteps for pointer between 0-20 & 240-260 Meters

Important!

First put the new TGas into the folder and overwrite the originals!

1. open ur Menu_1024_768.ini!
2. Find following 2 Blocks ( [G3F IXXX] ), XXX number is individual.

[G3F IXXX]
Name=Crt val
Type=1031;Stat bmp array
ItemID=0x3F1F0002
ParentID=0x3F1F0000
Pos=158,-20,35,304
Color=0xFE
Materials=1
Display=5;Linear&rotation
Mat 0=data/menu/gui/layout/Zeiger260.tga
Crop 0=0,0,1,1
MatFlags=0x29
TexFmt=0x9
Drag=false
BmpState=1
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G3F IXXX]
Name=New val
Type=1031;Stat bmp array
ItemID=0x3F1F0003
ParentID=0x3F1F0000
Pos=158,-20,35,304
Color=0x969696C8
Materials=1
Display=5;Linear&rotation
Mat 0=data/menu/gui/layout/Zeiger260.tga
Crop 0=0,0,1,1
MatFlags=0x29
TexFmt=0x9
Drag=false
BmpState=1
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

3. Now just change the Pos= (Pos=158,-20,35,304) in both Blocks into following:

Pos=154,-19,40,304

4. save and its finished!

Download here:

http://rapidshare.de/files/12694146/...enMod.zip.html

Greetings Sale

01-24-06, 09:37 PM	#16
Spent Watch Join Date: Jan 2006 Posts: 30 Downloads: 0 Uploads: 0	you must edit the .cfgs not replace them totally. __________________

01-26-06, 05:55 PM	#19
FLB sale U-999 Engineer Join Date: Apr 2005 Posts: 206 Downloads: 0 Uploads: 0	Hi Mast! Ok, it could be very sure that u have not increased ur DialsNumber in the Dials.cfg, or there are two same [G3F IXXX] Numbers..... U MUST TAKE THE NEXT IXXX Number for all new Blocks u put behind the last Original (Modded) Block in that section! If there is a doubled IXXX Number, it will not work or will not Move like u say..... PLEASE CHECK YOUR Entries again, or u can upload ur Dials.cfg and menu_1024_768.ini and i will take a look at it. I am sure that there is something with double used IXXX Number.... TO ALL!!! DO NOT JUST COPY ALL THE MENU_1024_768.INI ENTRIES I HAVE POSTET IN THE README!!! U MUST LOOK AT UR LAST [G3F IXXX] NUMBER AND THEN RENUMBER ALL NEW BLOCKS I HAVE POSTET IN THE README! That is very important! The Entries in the Dials.cfg is also very important to make no mistakes there..... If nothing works....then upload these both Files and i can take a look into it! I know it isn`t easy to install, but if everything is right, it works without any Problems! The big Problem is just that there are a lot of different Mods which are affecting those two Files with new Entries..... So i cannot just put my Files up, they would not Work properly on your Systems..... Hope u can enjoy those 4 dials.... The 6 Dials Version has more Features that u will like! Not long time anymore for release..... Best wishes Sale __________________ Wolves are waiting for the night to come....

01-31-06, 01:04 PM	#25
Beltza Mate Join Date: Feb 2003 Location: España Posts: 56 Downloads: 128 Uploads: 0	Great mod! Congratulations. I've adapted it to the 24th Flotilla Spanish Translation mod, and it is available at the 24th Flotilla ( www.24flotilla.com). http://www.24flotilla.com/html/modul...wtopic&t=12898 Thanks FLB sale U-999 __________________ 24th Flotilla Commander Commander of the U 110 www.24flotilla.com

02-04-06, 11:34 AM	#26
CCIP Navy Seal Join Date: Apr 2005 Location: Waterloo, Canada Posts: 8,700 Downloads: 29 Uploads: 2	Installed and running smoothly. As always, you're the master of very clean, simple, and super-useful mods __________________ There are only forty people in the world and five of them are hamburgers. -Don Van Vliet (aka Captain Beefheart)

02-04-06, 03:00 PM	#27
FLB sale U-999 Engineer Join Date: Apr 2005 Posts: 206 Downloads: 0 Uploads: 0	Hi CCIP! Thanks for those compliments Nice that somebody likes it! Greetings Sale __________________ Wolves are waiting for the night to come....

01-24-06, 09:41 PM	#17
Jmack Seasoned Skipper Join Date: Oct 2005 Posts: 669 Downloads: 23 Uploads: 0	nahhh ... lol ... my mistake i put the 1024_768 in the wrong folder ... i didnt replace the original files just made new ones to use with mod enabler because he mades backups of them so if i need them again i just have to disable the mod in question works fine now thanks afterall ... with the right instructions editing the files is not so bad P.S. : i dont seem to find the Boardinstrumente mod in the download section is it under another name ?

01-26-06, 12:58 PM	#18
Mast XO Join Date: May 2005 Location: Denver, CO. Posts: 403 Downloads: 49 Uploads: 0	Hi Sale, Installed using your instructions and everything shows correctly. Two problems though, the compass doesn't move and the 260m is stuck at 129. The other two dials work (speed and shallow depth). Any help? I'm using it with no other mods. Mast

01-27-06, 10:57 AM	#20
Mast XO Join Date: May 2005 Location: Denver, CO. Posts: 403 Downloads: 49 Uploads: 0	Hey Sale, Found two typos and corrected them. One was missing a bracket and the other was an extra number that was removed. All work now. Thank you! Mast

01-28-06, 01:35 PM	#21
Jochem Electrician's Mate Join Date: Apr 2005 Location: Paris Posts: 134 Downloads: 245 Uploads: 0	... Thank U FLB sale U-999 for this mod, it works perfectly. I is just sad for me to rename one by one the i3f cause the last mine was 286 ^^ Otherwise it is a great useful mod ! Thank U again mate. I have just 2 questions: 1/ I'm really interesting by your lower right gauges cause its looks very fine and well detailed. Where to find it plz ? 2/ I'am interesting too for delete like you the black transparent menu below. How to do it plz ? Thank U gain. I'm really impatient to see your next promising mods ! ...

01-28-06, 05:57 PM	#22
CV-707 Stowaway Posts: n/a Downloads: Uploads:	They drastically increased my gameplay beauty, THANKS!

01-30-06, 06:49 PM	#24
Mast XO Join Date: May 2005 Location: Denver, CO. Posts: 403 Downloads: 49 Uploads: 0	I can't wait!! Mast

02-06-06, 10:07 AM	#28
don1reed Ace of the Deep Join Date: Dec 2004 Location: Valhalla: Silent Generation Posts: 1,149 Downloads: 910 Uploads: 0	Sale, you deserve sainthood. You're a boon to us old salts in the "bi-focal" crowd. I no longer have to press my face against the monitor to see the dang headings :rotfl: the next time I bump into Pope Benedict, I'll put in a good word for ye. tnx, __________________ [SIGPIC][/SIGPIC] During times of universal deceit, telling the truth becomes a revolutionary act. ~ George Orwell

02-06-06, 01:25 PM	#29
FLB sale U-999 Engineer Join Date: Apr 2005 Posts: 206 Downloads: 0 Uploads: 0	Hi! No time in Vatican to play PC...... __________________ Wolves are waiting for the night to come....

02-06-06, 01:27 PM	#30
FLB sale U-999 Engineer Join Date: Apr 2005 Posts: 206 Downloads: 0 Uploads: 0	Hi all! This is an update for my 4 Dials Mod! Update for the 260 meter Dial. - overworked Textures, now with 10 meter steps. - overworked pointer optical. - corrected depthsteps for pointer between 0-20 & 240-260 Meters Important! First put the new TGas into the folder and overwrite the originals! 1. open ur Menu_1024_768.ini! 2. Find following 2 Blocks ( [G3F IXXX] ), XXX number is individual. [G3F IXXX] Name=Crt val Type=1031;Stat bmp array ItemID=0x3F1F0002 ParentID=0x3F1F0000 Pos=158,-20,35,304 Color=0xFE Materials=1 Display=5;Linear&rotation Mat 0=data/menu/gui/layout/Zeiger260.tga Crop 0=0,0,1,1 MatFlags=0x29 TexFmt=0x9 Drag=false BmpState=1 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G3F IXXX] Name=New val Type=1031;Stat bmp array ItemID=0x3F1F0003 ParentID=0x3F1F0000 Pos=158,-20,35,304 Color=0x969696C8 Materials=1 Display=5;Linear&rotation Mat 0=data/menu/gui/layout/Zeiger260.tga Crop 0=0,0,1,1 MatFlags=0x29 TexFmt=0x9 Drag=false BmpState=1 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF 3. Now just change the Pos= (Pos=158,-20,35,304) in both Blocks into following: Pos=154,-19,40,304 4. save and its finished! Download here: http://rapidshare.de/files/12694146/...enMod.zip.html Greetings Sale __________________ Wolves are waiting for the night to come....