[REL] 3000 Yard/Meter Bearing Tools

[NonWonderDog]

Updated 3-09-2008:
3000 Yard/Meter Bearing Tools

Now updated for v1.5 and includes Narwhal and Tench classes. All the American tools are in yards. The German tools are in meters. If you want them all to be in meters, or want them all to be in yards, you can replace the American tools with renamed German files or vice versa. All of the American tools are identical, as are both of the German tools.


Download the tool appropriate for your resolution:
1024x768:
http://files.filefront.com/1024x768+.../fileinfo.html
1280x960, 1280x1024, etc:
http://files.filefront.com/1280x960+.../fileinfo.html

In the same vein as CaptainCox's work, I've converted Pato's 3000 meter submarine bearing tool for use with SH4. The 3000 yard version is particularly handy; you no longer have to convert from yards to nautical miles to plot close-range targets on the map. I've also made some small changes in maps.cfg so that these show up at higher zoom levels. Ther are other small tweaks to zoom levels in the maps.cfg file, as well.

The only caveat is that you must have a video card capable of processing 4096x4096 DDS textures in order to use the mod. If you can run SH4 at all, you most likely meet this requirement. Geforce FX cards and their ATI equivalents may have issues.

All credit for the images goes to Pato, wherever he is nowadays. I only fixed the scale and rotation (they were off by ~0.5 degree) and converted them for SH4 use. Pato's site isn't up anymore, but the original SH3 mod can still be found here:
http://web.archive.org/web/20060210204321/http://venus.walagata.com/w/patricioz/SH3_Bearing_Overlay_3.0.zip




1680x1050 Bearing Tools
These are not as user-friendly as the others, so they have their own section. If I make tools for other resolutions above 1280x1024 they'll have the same problems.

You MUST have a DirectX 10 capable video card to use these!
You don't have to have either DirectX 10 or Windows Vista, but only DirectX 10 cards support 8192x8192 textures. And if your card has less than 256 Mb of texture memory, I suggest you turn back now.

Additionally, you MUST NOT enable more than one bearing tool at once!
This is for memory reasons. 8192x8192 textures are BIG. Very big. SH4 can only allocate so much texture memory, and if it has to load ten of these things it won't have room for any other textures. You should be fine if you don't enable more than one at once. You might be fine with more enabled, but it will increase your load times at the very least.

If you extract all of these, they will take up 1.08 Gb. If that's too much, you don't have to extract all of them at once.


Download Here: http://files.filefront.com/1680x1050.../fileinfo.html

[cdrake66]

Great work NonWonderDog. Unfortunately it appears to have the same issue as Captaincox's 1500 meter/yard overlays. On my system running 1920x1200 the outer range 3000 meter ring comes up at ~1600 meters.
I was able to rescale his to correct it for widescreen but the texture becomes 4096x4096 to pull it off. Needless to say, to scale yours up for widescreen would require a texture of 8192x8192; that's a non-starter lol. Still, this would be great for standard 4x3 resolutions.

Regards,
Chris

[Spytrx]

http://rapidshare.com/files/24621434...3000_Yards.rar

[akdavis]

Originally Posted by cdrake66

Great work NonWonderDog. Unfortunately it appears to have the same issue as Captaincox's 1500 meter/yard overlays. On my system running 1920x1200 the outer range 3000 meter ring comes up at ~1600 meters.
I was able to rescale his to correct it for widescreen but the texture becomes 4096x4096 to pull it off. Needless to say, to scale yours up for widescreen would require a texture of 8192x8192; that's a non-starter lol. Still, this would be great for standard 4x3 resolutions.

Regards,
Chris

I actually have the same problem on my CRT. I tried this and Captaincox's bearing tool at 1600x1200 and both were out of scale. I also tried Captaincox's at 1280x960 and 1024x768 and had the same problem. I'm running the game on two 6800 Ultras.

[cdrake66]

Originally Posted by akdavis

I actually have the same problem on my CRT. I tried this and Captaincox's bearing tool at 1600x1200 and both were out of scale. I also tried Captaincox's at 1280x960 and 1024x768 and had the same problem. I'm running the game on two 6800 Ultras.

Wow, that is odd. Have you tried my rescaled versions? I'd be curious to know if those appear to be scaled properly for you.

Regards,
Chris

[akdavis]

Originally Posted by cdrake66

Wow, that is odd. Have you tried my rescaled versions? I'd be curious to know if those appear to be scaled properly for you.

Regards,
Chris

I tried you imperial widescreen version and it appeared the same as the others. It is odd.

[Warspite]

Thanks for this. I've been using it very successfully in patch 1.1, so the question is will you be updating it for 1.2?
Think I read that the Sub files had been altered in 1.2.

Cheers.

[Rip]

Originally Posted by cdrake66

Great work NonWonderDog. Unfortunately it appears to have the same issue as Captaincox's 1500 meter/yard overlays. On my system running 1920x1200 the outer range 3000 meter ring comes up at ~1600 meters.
I was able to rescale his to correct it for widescreen but the texture becomes 4096x4096 to pull it off. Needless to say, to scale yours up for widescreen would require a texture of 8192x8192; that's a non-starter lol. Still, this would be great for standard 4x3 resolutions.

Regards,
Chris

Same here. Hopefully someone will make a kickass 1920x1200 one at some point. I just leave the default one from RFB in there but I just ignore the ranges. Still good for watching the bearing.

[deadok]

All you need is to take any other version and simply resize dds files in it (Photoshop works good).
resize factor = newXResolution/oldXResolution.
e.g. creating 1920 version using 1024px original you'll get factor = 1920/1024 = 1.875.
Although, as op noticed, your video card should support big textures (And non-square textures, otherwise you'll need to additionally enlarge image upto 8192x8192 without scaling)

anyways here is 1920x version for gar (hopefully should work with any other sub, using imperial measurements)
>here will be linky, as soon as i find the way to upload file (i don't have rights to do so, so uploaded to depositfiles<

replace original "nss_gar_shp.dds" in /data/submarine/NSS_Gar with one in archive.
if you need any other sub place supplied file in corresponding subfolder of /data/submarine and rename it to replace original [SUBNAME]_shp.dds

i'm too lazy to test all variants in order to make complete package :p

[WitoldGritz]

where can i download Bearing tool? metric and Imperial?
all DL links seems too old!!!

I use JGSME or whatever its called

I have verision of game 1.4 without U-boat addon, but still!!!


to play properly on full realism in this game i need "Bearing tool" an Nomograph like an air!

But seems all dl links are damn old!!!
can ANYONE help me? maybe someone has them for DL?
PLZ!

[Rockin Robbins]

I have a version available that to the best of my recollection and ability to research is not NonWonderDog's. Check it out in my signature. OK, don't. It's not there. Do a search in the download area for 3000 yard/meter bearing plotter. I'll post a link here later when I have time.

[Anvart]

Originally Posted by NonWonderDog

3000 Yard Bearing Tool:
http://files.filefront.com/Bearing_T.../fileinfo.html

3000 Meter Bearing Tool:
http://files.filefront.com/Bearing_T.../fileinfo.html

In the same vein as CaptainCox's work, I've converted Pato's 3000 meter submarine bearing tool for use with SH4. The 3000 yard version is particularly handy; you no longer have to convert from yards to nautical miles to plot close-range targets on the map. I've also made one small change in maps.cfg (from SymbolZoom=10 to SymbolZoom=20), so these will start to show up at one zoom level higher than in the screenshot.

I can say with certainty that these display with perfect scaling on my computer, with a Nvidia 6600GT running SH4 at 1024x768. Your mileage may vary, but these are scaled to the standard 2 meters per pixel size that the ingame maps obstensibly use.

The only caveat is that you must have a video card capable of processing 4096x4096 DDS textures in order to use the mod. If you can run SH4 at all, you most likely meet this requirement. Geforce FX cards and their ATI equivalents may have issues.

All credit for the images goes to Pato, wherever he is nowadays. I only fixed the scale and rotation (they were off by ~0.5 degree) and converted them for SH4 use. Pato's site isn't up anymore, but the original SH3 mod can still be found here:
http://web.archive.org/web/200602102...verlay_3.0.zip

Pato's, CapCox's 3000 BT work badly with ATI (scale, sharpness) ...
You have the same problems.???