silent hunter 3 commander 1.43

ober lt lare · 07-31-05, 12:00 PM

hi installed silent hunter 3 commander 1.43 and when i did everything works except in the damage control screen my hull percentage is gone so i dont know what my hull intregreity is please help

Ryan

BladeHeart · 07-31-05, 12:15 PM

I believe that is intentional.

Check the readme file.

The Hull Interity percentage was removed in an erleier version of SH3Cmm and/or RUB.

Makes for interesting times when you start wondering just how much damage you have taken. The percentage is shown in the end of patrol report.

Once got rammed by a Coastal Merchant (my fault), and then hit the sub nets on my return to port, which resulted in flooding, and damaged hull sections. At the end of the mission I was still at 86%. Another time I took what I thought was relatively minor damage as the result of a fighter bombing me on the surface; got back and found I was 16%!

Does spice the game up.

ober lt lare · 07-31-05, 12:19 PM

how do i put it back in the game with silent hunter 3 commander installed

Ryan

BladeHeart · 07-31-05, 12:22 PM

Sorry I don't know.

I do know that you are unlikely to get a response from Beery who has understandably strong views on the issue of messing with his team's mods.

Try it though, I do recommend it.

Nico71 · 07-31-05, 12:28 PM

I've never seen an U-boat with a hull-integrity-meter! This is not Star Trek! A real captain will never know for sure if there is a weakened weld seam or not! Even a damage inspection on the surface won't help here. Only in dock the actual hull-integrity can be determined! If you have suffered battle damage, it's a wise idea to RTB!

Mouseketeer · 08-01-05, 02:13 AM

Quote:

Originally Posted by Nico71

I've never seen an U-boat with a hull-integrity-meter! This is not Star Trek!

:rotfl:

The Avon Lady · 08-01-05, 02:21 AM

Children, play nice!

To restore the hull integrity meter, look here.

Carolus Rex · 08-01-05, 03:35 AM

Quote:

Originally Posted by Mouseketeer

Quote:

Originally Posted by Nico71

I've never seen an U-boat with a hull-integrity-meter! This is not Star Trek!

:rotfl:

Well, a real U-boat commander had visual damage to estimate. The crew ccould check things out etc.

I do not think the commanders roamed the atlantic without a clue if threre U-Boat would sink when it hits the next wave or if it is 100% undamaged.

I do bevlieve that some commanders decided to return to port when there U-Boat was severly damaged. How can we take this decision when we don't know if our bot is sinking or is undamaged?

Mouseketeer · 08-01-05, 03:44 AM

Quote:

Originally Posted by Carolus Rex

Quote:

Originally Posted by Mouseketeer

Quote:

Originally Posted by Nico71

I've never seen an U-boat with a hull-integrity-meter! This is not Star Trek!

:rotfl:

Well, a real U-boat commander had visual damage to estimate. The crew ccould check things out etc.

I do not think the commanders roamed the atlantic without a clue if threre U-Boat would sink when it hits the next wave or if it is 100% undamaged.

I do bevlieve that some commanders decided to return to port when there U-Boat was severly damaged. How can we take this decision when we don't know if our bot is sinking or is undamaged?

Yeah, you're absolutely right, I think it's player's choice to have an integrity meter displayed or not, it's the answer that made me laugh.

KiloAlpha4 · 08-01-05, 04:08 AM

um can someone tell me where your suppose to place the file to get it to work ? Thanks the file that downloads is SH3Cmdr1.43.7z a readme would have been nice lol.

Catfish · 08-01-05, 04:40 AM

Oops wrong thread again.
Recently i'm being thrown out of Subsim without being able to log in again. If this happens as i just wrote a message and clicked "submit", this message will appear somewhere (randomly?) in another thread.
Greetings,
Catfish
I'll copy this over at the appropriate forum -

Catfish · 08-01-05, 04:44 AM

Hello,
in fact i find the stealth meter along with the hull integrity measured in percent the most unrealistic things that the sim offers - good it can be turned off. You cannot measure the hull integrity, you can only talk of damaged sealings, buckled steel plates and make a rough guess how deep you might go ... maybe you could do it today if you installed a laser measuring system and nano technology measuring stress and strain of the hull ...
Then the "we have been detected " message is also nonsense, but you can certainly put the file back you want
Greetings,
Catfish

Ibber · 08-01-05, 05:05 AM

I don't think that you should make it apear if you want to use SHIII commander to the fullest. Sorry but my oppinion. I normally hold counts with how many times I have to repar my boat while sailing. If you haven't been DC'ed or been diving to deep, then there are a good chance that your boat are at 100% still.
I love that it's gone, because it told me exatly how my subs condition were. It's correct that you would get different kinds of observations from your crew, but they coulden't check the pressurehull, which is exatly what the hull integrity meter does.

The Avon Lady · 08-01-05, 05:21 AM

Quote:

Originally Posted by KiloAlpha4

um can someone tell me where your suppose to place the file to get it to work ? Thanks the file that downloads is SH3Cmdr1.43.7z a readme would have been nice lol.

There's a separate thread about SH3 Commander 1.43, with all the info you need.

In short, you can install it anywhere you want on your hard drive.

Nopileo · 08-01-05, 05:29 AM

Quote:

Originally Posted by Nico71

I've never seen an U-boat with a hull-integrity-meter! This is not Star Trek!

:rotfl:

"Divert available power to aft shields! Ready photon torpedoes!"

07-31-05, 12:00 PM	#1
ober lt lare A-ganger Join Date: Jul 2005 Location: michigan Posts: 77 Downloads: 0 Uploads: 0	silent hunter 3 commander 1.43 hi installed silent hunter 3 commander 1.43 and when i did everything works except in the damage control screen my hull percentage is gone so i dont know what my hull intregreity is please help Ryan

08-01-05, 02:21 AM	#7
The Avon Lady Über Mom Join Date: May 2005 Location: Jerusalem, Israel Posts: 6,147 Downloads: 5 Uploads: 0	Children, play nice! To restore the hull integrity meter, look here. __________________ "Victory will come to us from the wombs of our women." - Houari Boumedienne, President of Algeria, Speech before the UN, 1974

08-01-05, 04:08 AM	#10
KiloAlpha4 Loader Join Date: Jun 2005 Location: Canada Posts: 84 Downloads: 0 Uploads: 0	lol um can someone tell me where your suppose to place the file to get it to work ? Thanks the file that downloads is SH3Cmdr1.43.7z a readme would have been nice lol. __________________ PS MODS -Your one stop PS mod source.. click HERE !

08-01-05, 05:05 AM	#13
Ibber Swabbie Join Date: Apr 2005 Location: Copenhagen, Denmark Posts: 6 Downloads: 0 Uploads: 0	I don't think that you should make it apear if you want to use SHIII commander to the fullest. Sorry but my oppinion. I normally hold counts with how many times I have to repar my boat while sailing. If you haven't been DC'ed or been diving to deep, then there are a good chance that your boat are at 100% still. I love that it's gone, because it told me exatly how my subs condition were. It's correct that you would get different kinds of observations from your crew, but they coulden't check the pressurehull, which is exatly what the hull integrity meter does. __________________ Brian Kirkegaard Aka: \'Kurt von GoÃŸler\' U-49 The way games are ment to be played.....

07-31-05, 12:15 PM	#2
BladeHeart Chief Join Date: Mar 2005 Posts: 320 Downloads: 0 Uploads: 0	I believe that is intentional. Check the readme file. The Hull Interity percentage was removed in an erleier version of SH3Cmm and/or RUB. Makes for interesting times when you start wondering just how much damage you have taken. The percentage is shown in the end of patrol report. Once got rammed by a Coastal Merchant (my fault), and then hit the sub nets on my return to port, which resulted in flooding, and damaged hull sections. At the end of the mission I was still at 86%. Another time I took what I thought was relatively minor damage as the result of a fighter bombing me on the surface; got back and found I was 16%! Does spice the game up.

07-31-05, 12:19 PM	#3
ober lt lare A-ganger Join Date: Jul 2005 Location: michigan Posts: 77 Downloads: 0 Uploads: 0	how do i put it back in the game with silent hunter 3 commander installed Ryan

07-31-05, 12:22 PM	#4
BladeHeart Chief Join Date: Mar 2005 Posts: 320 Downloads: 0 Uploads: 0	Sorry I don't know. I do know that you are unlikely to get a response from Beery who has understandably strong views on the issue of messing with his team's mods. Try it though, I do recommend it.

07-31-05, 12:28 PM	#5
Nico71 Medic Join Date: Sep 2001 Location: Germany Posts: 168 Downloads: 145 Uploads: 0	I've never seen an U-boat with a hull-integrity-meter! This is not Star Trek! A real captain will never know for sure if there is a weakened weld seam or not! Even a damage inspection on the surface won't help here. Only in dock the actual hull-integrity can be determined! If you have suffered battle damage, it's a wise idea to RTB!

08-01-05, 04:40 AM	#11
Catfish Dipped Squirrel Operative Join Date: Sep 2001 Location: ..where the ocean meets the sky Posts: 17,767 Downloads: 38 Uploads: 0	Oops wrong thread again. Recently i'm being thrown out of Subsim without being able to log in again. If this happens as i just wrote a message and clicked "submit", this message will appear somewhere (randomly?) in another thread. Greetings, Catfish I'll copy this over at the appropriate forum -

08-01-05, 04:44 AM	#12
Catfish Dipped Squirrel Operative Join Date: Sep 2001 Location: ..where the ocean meets the sky Posts: 17,767 Downloads: 38 Uploads: 0	Hello, in fact i find the stealth meter along with the hull integrity measured in percent the most unrealistic things that the sim offers - good it can be turned off. You cannot measure the hull integrity, you can only talk of damaged sealings, buckled steel plates and make a rough guess how deep you might go ... maybe you could do it today if you installed a laser measuring system and nano technology measuring stress and strain of the hull ... Then the "we have been detected " message is also nonsense, but you can certainly put the file back you want Greetings, Catfish