Help with emblems placemet

CapZap1970 · 10-21-21, 10:17 AM

Hello everybody...

I would like to ask for some help with an issue with the emblems placement in the VIIC/4 conning tower of Onealex mod.

As you can see in the screenshot, the left emblem is partially covered by the radar housing and it looks really bad. I tinkered a little bit with the .DAT file with my limited knowledge and I discovered that the emblems on both sides are opposite faces of the the same object model. So, if I move it forward, both emblems are "floating" separated from the surface of the CT. I just had a reply from Onealex and he told me that the only way to fix this via editing the model. Of course it requires the necessary knowledge and skill to do it. I have no idea on this matter...

I would like to know if someone could check this and modify it so both emblems are moved more towards the front, so they can be closer one from the other, only the necessary distance so the emblem can be seen completely on both sides. Any help will be most welcome.
Thanks in advance for your replies!

Jeff-Groves · 10-21-21, 12:28 PM

The Stock VIIC 4 turm was not screwed up like that.
Who screwed the pooch?

CapZap1970 · 10-21-21, 06:04 PM

Quote:

Originally Posted by Jeff-Groves

The Stock VIIC 4 turm was not screwed up like that.
Who screwed the pooch?

No idea Jeff...

But anyway... looking for a solution to that....

I am guessing that the placement of the emblem was moved forward to have some room of the horse shoe at the sides of the conning tower.

CapZap1970 · 10-21-21, 06:24 PM

After I checked the DAT file in the Stock SH3, things went from bad to worse... I can't even find the damn item (the entry where the emblem OBJ should be)

ivanov.ruslan · 10-21-21, 07:08 PM

I can't be useful to you with the coordinates, but i can tell you how i mount them, ,ha,ha

In this case it is 7c3, for 7c4 i don't know if it will work
Well there is a little adjustment, but there is no complete happiness

For example

CapZap1970 · 10-21-21, 07:17 PM

Quote:

Originally Posted by ivanov.ruslan

I can't be useful to you with the coordinates, but i can tell you how i mount them, ,ha,ha

In this case it is 7c3, for 7c4 i don't know if it will work
Well there is a little adjustment, but there is no complete happiness

For example

I see....

in this case it's for only 1 emblem that goes at the front, right?
The problem is when you want to switch skins... you would have to make 1 TGA of every skin with every emblem....

Well, anyway, as you said, hard to achieve complete happiness....

Thanks for your kind reply!

ivanov.ruslan · 10-21-21, 07:18 PM

I remember Kendras had made some kind of emblem mod, but it was for 7c1

CapZap1970 · 10-21-21, 07:20 PM

Quote:

Originally Posted by ivanov.ruslan

I remember Kendras had made some kind of emblem mod, but it was for 7c1

Do you have a link or something? Would be great to take a look at that... might shed some light on the possible solution...

ivanov.ruslan · 10-21-21, 07:21 PM

Quote:

Originally Posted by CapZap1970

I see....

in this case it's for only 1 emblem that goes at the front, right?
!

No, it can be seen from both sides, you just have to guess the place a bit,as in the first picture

ivanov.ruslan · 10-21-21, 07:22 PM

Quote:

Originally Posted by CapZap1970

Do you have a link or something?

Maik serios

CapZap1970 · 10-21-21, 07:28 PM

Quote:

Originally Posted by ivanov.ruslan

Maik serios

Yup.... Just found it and checked..... The concept is fine, but the TGA is different, so it would be necessary to create another template.... I might be tempted to do that using your pics as guide...

Not an easy task...

would it be possible you send me the TGA with the emblem? Thanks a lot in advance.
At least i could have 1 emblem at the front that can be seen correctly...

ivanov.ruslan · 10-21-21, 07:42 PM

Yes, the еmblem is from Compilation 1,from Uboat7c41,Turm 7c3.dat the size and can be reduced or increased in paint.net
https://dox.abv.bg/download?id=43fe5...не

https://dox.abv.bg/download?id=5f522...не

I'm sorry, but I'm not registered in the media fire

CapZap1970 · 10-21-21, 07:48 PM

Quote:

Originally Posted by ivanov.ruslan

Yes, the еmblem is from Compilation 1,from Uboat7c41,Turm 7c3.dat the size and can be reduced or increased in paint.net
https://dox.abv.bg/download?id=43fe5...не

https://dox.abv.bg/download?id=5f522...не

I'm sorry, but I'm not registered in the media fire

ivanov.ruslan, Thanks a lot for the file, but I mean the file (TGA) of the turm with the emblem on it.... Sorry for not explaining myself better.

ivanov.ruslan · 10-21-21, 07:53 PM

Hmm, I need to think a little, was it not from SH5

https://www.subsim.com/radioroom/sho...d.php?t=164789

ivanov.ruslan · 10-21-21, 08:16 PM

Obviously, the emblem is on U 406, but in the link i attached it is in green, it's obviously some moder of SH3, but who, i can't remember

10-21-21, 10:17 AM	#1
CapZap1970 Sea Lord Join Date: Mar 2007 Location: La Paz, Bolivia Posts: 1,965 Downloads: 275 Uploads: 51	Help with emblems placemet Hello everybody... I would like to ask for some help with an issue with the emblems placement in the VIIC/4 conning tower of Onealex mod. As you can see in the screenshot, the left emblem is partially covered by the radar housing and it looks really bad. I tinkered a little bit with the .DAT file with my limited knowledge and I discovered that the emblems on both sides are opposite faces of the the same object model. So, if I move it forward, both emblems are "floating" separated from the surface of the CT. I just had a reply from Onealex and he told me that the only way to fix this via editing the model. Of course it requires the necessary knowledge and skill to do it. I have no idea on this matter... I would like to know if someone could check this and modify it so both emblems are moved more towards the front, so they can be closer one from the other, only the necessary distance so the emblem can be seen completely on both sides. Any help will be most welcome. Thanks in advance for your replies! __________________

10-21-21, 06:24 PM	#4
CapZap1970 Sea Lord Join Date: Mar 2007 Location: La Paz, Bolivia Posts: 1,965 Downloads: 275 Uploads: 51	After I checked the DAT file in the Stock SH3, things went from bad to worse... I can't even find the damn item (the entry where the emblem OBJ should be) __________________ Last edited by CapZap1970; 10-21-21 at 06:38 PM.

10-21-21, 12:28 PM	#2
Jeff-Groves GLOBAL MODDING TERRORIST Join Date: Sep 2014 Posts: 5,649 Downloads: 137 Uploads: 0	The Stock VIIC 4 turm was not screwed up like that. Who screwed the pooch?

10-21-21, 07:08 PM	#5
ivanov.ruslan The Old Man Join Date: Oct 2012 Location: Pleven,BG Posts: 1,577 Downloads: 901 Uploads: 0	I can't be useful to you with the coordinates, but i can tell you how i mount them, ,ha,ha In this case it is 7c3, for 7c4 i don't know if it will work Well there is a little adjustment, but there is no complete happiness For example

10-21-21, 07:18 PM	#7
ivanov.ruslan The Old Man Join Date: Oct 2012 Location: Pleven,BG Posts: 1,577 Downloads: 901 Uploads: 0	I remember Kendras had made some kind of emblem mod, but it was for 7c1

10-21-21, 07:42 PM	#12
ivanov.ruslan The Old Man Join Date: Oct 2012 Location: Pleven,BG Posts: 1,577 Downloads: 901 Uploads: 0	Yes, the еmblem is from Compilation 1,from Uboat7c41,Turm 7c3.dat the size and can be reduced or increased in paint.net https://dox.abv.bg/download?id=43fe5...не https://dox.abv.bg/download?id=5f522...не I'm sorry, but I'm not registered in the media fire

10-21-21, 07:53 PM	#14
ivanov.ruslan The Old Man Join Date: Oct 2012 Location: Pleven,BG Posts: 1,577 Downloads: 901 Uploads: 0	Hmm, I need to think a little, was it not from SH5 https://www.subsim.com/radioroom/sho...d.php?t=164789

10-21-21, 08:16 PM	#15
ivanov.ruslan The Old Man Join Date: Oct 2012 Location: Pleven,BG Posts: 1,577 Downloads: 901 Uploads: 0	Obviously, the emblem is on U 406, but in the link i attached it is in green, it's obviously some moder of SH3, but who, i can't remember