How to install Dive at Dawn?

Col7777 · 03-27-20, 03:47 AM

I did a fresh install of SH4, I downloaded JSGME and put it in the SH4 Sim.
I downloaded Dive at Dawn and put that in the Mods folder, added it using the JSGME, started SH4 but no sign of it in the menu, so do I install it using the JSGME or is there another way?

Also tried to add another sub but that too was a no show.

Col.

propbeanie · 03-27-20, 09:19 AM

1. Well, where do you have Silent Hunter 4 installed? What is the "path" to the SH4.exe file?

2. Which version of the game do you have? In the Silent Hunter 4 folder, right-click on the SH4.exe file, which will display a pop-up menu (aka: "Context menu"). On that little pop-up, choose the "Properties" choice at the bottom of the menu list. From that "Properties" page that displays, click on the "Details" tab is a section in the middle that shows "Product Version: ___" For WDAD, you need to have version 1.5

You can upgrade to v1.4 with the patch available on SubSim here
Official v1.4 patch

To get v1.5 however, you do need to spend more money, and either get it from Amazon or Ubisoft, if you can find it. You cannot use the Steam version of it on anything other than a Steam version of the "base" game from them, which is v1.3... so sad, but true. You might be able to find a "Gold Edition", if you do need v1.5 easier than you can find the Uboat Missions Addon...

Col7777 · 03-27-20, 10:17 AM

Hi, sorry to be a pain AGAIN lol.

I have SH4 on my D drive and I also have version 1.5
Years ago I must have bought the upgrade as I had it on a disk, I installed it after I installed SH4.

Col.

Moonlight · 03-27-20, 12:26 PM

Have a look for anything wrong with the folders in Dive at Dawn, there could be a double folder in there, Dive at Dawn\Dive at Dawn\Data instead of Dive at Dawn\Data. There probably isn't, but you never know.

Col7777 · 03-27-20, 01:21 PM

Above it says I should have DAD ver 1.5
I just noticed I have ver 1.7 plus an update for 1.7.

Is that why it isn't working?

Col.

Col7777 · 03-28-20, 05:53 AM

OK, I tried again, for some unknown reason it installed.
I went on the training just to get used to the sub, on the T Class when I went to periscope depth it crashed to desktop when I reached the depth.

I tired the U Class and that worked OK, I've not been an any other scenarios yet.

I noticed too the lights from the light house were bright squares as well, so I think it hasn't installed properly, any ideas please?

Col.

propbeanie · 03-28-20, 08:29 AM

Do you happen to know your display's "Native" resolution? In some versions of Windows, if you look at your "Screen resolution" applet, the "Resolution" drop-down box will show a "(recommended)" listing, which is what Windows is "seeing" as the "Native" resolution, as supplied via comm with the device, so be sure you are set correctly in Windows with that. Then, if using full-screen in SH4, on the Graphic Settings of the Options menu, be sure you have the game set to the same resolution. If you are using the "Windowed" setting, it's more difficult to get things correct, but it does have to be a resolution smaller than what the display is. Also, have you emptied the "Save" folder, which is usually "C:\Users \UserName \Documents \SH4"? "UserName" is what ever you use to log-in to Windows with. "Documents" might be "My Documents", or some other designation, Windows version dependent... Be sure and consult some of the later posts in Rubini's Nvidia tweaks to SH3/SH4 and other similar posts, especially Fifi's, if you can read his screen grabs (French).

Col7777 · 03-28-20, 11:06 AM

Thanks for that, my SH4 Screen res was miles out, my PC screen res is 1920x1080, after I adjusted the sim it was a lot better, things were a bit smaller though lol.

I still have the external camera not really behaving, when I select to to follow the sub it is at an angle plus high up, I can adjust it but it seems it is off center plus it is high up, is that normal after installing the WDAD mod?

Also the sim crashes when I select periscope depth still as well, it runs OK till I do that.

Col.

propbeanie · 03-28-20, 03:16 PM

You order PD, and it crashes when getting to there? You don't have to look outside for it to crash? The game allows radio messages to come in after about PD, so I wonder about that... ??

- When you start a new career and travel on the surface to go on patrol, all is well? You dive to PD and you are OK, and only have trouble when coming back to PD after a deeper dive? Do you only have trouble in the one submarine, but not the other? s7rikeback might know a bit more than me about this (

might...

). We'll see if we can catch his attention, though he has been a busy man of late...

03-27-20, 03:47 AM	#1
Col7777 Grey Wolf Join Date: Jun 2003 Location: Manchester UK Posts: 944 Downloads: 260 Uploads: 0	How to install Dive at Dawn? I did a fresh install of SH4, I downloaded JSGME and put it in the SH4 Sim. I downloaded Dive at Dawn and put that in the Mods folder, added it using the JSGME, started SH4 but no sign of it in the menu, so do I install it using the JSGME or is there another way? Also tried to add another sub but that too was a no show. Col. __________________ Silent and Violent

03-27-20, 09:19 AM	#2
propbeanie CTD - it's not just a job Join Date: May 2016 Location: One hour from Music City USA! Posts: 10,098 Downloads: 451 Uploads: 2	1. Well, where do you have Silent Hunter 4 installed? What is the "path" to the SH4.exe file? 2. Which version of the game do you have? In the Silent Hunter 4 folder, right-click on the SH4.exe file, which will display a pop-up menu (aka: "Context menu"). On that little pop-up, choose the "Properties" choice at the bottom of the menu list. From that "Properties" page that displays, click on the "Details" tab is a section in the middle that shows "Product Version: ___" For WDAD, you need to have version 1.5 You can upgrade to v1.4 with the patch available on SubSim here Official v1.4 patch To get v1.5 however, you do need to spend more money, and either get it from Amazon or Ubisoft, if you can find it. You cannot use the Steam version of it on anything other than a Steam version of the "base" game from them, which is v1.3... so sad, but true. You might be able to find a "Gold Edition", if you do need v1.5 easier than you can find the Uboat Missions Addon... __________________ "...and bollocks to the naysayers" - Jimbuna

03-27-20, 10:17 AM	#3
Col7777 Grey Wolf Join Date: Jun 2003 Location: Manchester UK Posts: 944 Downloads: 260 Uploads: 0	Hi, sorry to be a pain AGAIN lol. I have SH4 on my D drive and I also have version 1.5 Years ago I must have bought the upgrade as I had it on a disk, I installed it after I installed SH4. Col. __________________ Silent and Violent

03-27-20, 12:26 PM	#4
Moonlight Ocean Warrior Join Date: Dec 2010 Location: Fookhall Copse Posts: 2,520 Downloads: 184 Uploads: 0	Have a look for anything wrong with the folders in Dive at Dawn, there could be a double folder in there, Dive at Dawn\Dive at Dawn\Data instead of Dive at Dawn\Data. There probably isn't, but you never know. __________________

03-27-20, 01:21 PM	#5
Col7777 Grey Wolf Join Date: Jun 2003 Location: Manchester UK Posts: 944 Downloads: 260 Uploads: 0	Above it says I should have DAD ver 1.5 I just noticed I have ver 1.7 plus an update for 1.7. Is that why it isn't working? Col. __________________ Silent and Violent

03-28-20, 05:53 AM	#6
Col7777 Grey Wolf Join Date: Jun 2003 Location: Manchester UK Posts: 944 Downloads: 260 Uploads: 0	OK, I tried again, for some unknown reason it installed. I went on the training just to get used to the sub, on the T Class when I went to periscope depth it crashed to desktop when I reached the depth. I tired the U Class and that worked OK, I've not been an any other scenarios yet. I noticed too the lights from the light house were bright squares as well, so I think it hasn't installed properly, any ideas please? Col. __________________ Silent and Violent

03-28-20, 08:29 AM	#7
propbeanie CTD - it's not just a job Join Date: May 2016 Location: One hour from Music City USA! Posts: 10,098 Downloads: 451 Uploads: 2	Do you happen to know your display's "Native" resolution? In some versions of Windows, if you look at your "Screen resolution" applet, the "Resolution" drop-down box will show a "(recommended)" listing, which is what Windows is "seeing" as the "Native" resolution, as supplied via comm with the device, so be sure you are set correctly in Windows with that. Then, if using full-screen in SH4, on the Graphic Settings of the Options menu, be sure you have the game set to the same resolution. If you are using the "Windowed" setting, it's more difficult to get things correct, but it does have to be a resolution smaller than what the display is. Also, have you emptied the "Save" folder, which is usually "C:\Users \UserName \Documents \SH4"? "UserName" is what ever you use to log-in to Windows with. "Documents" might be "My Documents", or some other designation, Windows version dependent... Be sure and consult some of the later posts in Rubini's Nvidia tweaks to SH3/SH4 and other similar posts, especially Fifi's, if you can read his screen grabs (French). __________________ "...and bollocks to the naysayers" - Jimbuna

03-28-20, 11:06 AM	#8
Col7777 Grey Wolf Join Date: Jun 2003 Location: Manchester UK Posts: 944 Downloads: 260 Uploads: 0	Thanks for that, my SH4 Screen res was miles out, my PC screen res is 1920x1080, after I adjusted the sim it was a lot better, things were a bit smaller though lol. I still have the external camera not really behaving, when I select to to follow the sub it is at an angle plus high up, I can adjust it but it seems it is off center plus it is high up, is that normal after installing the WDAD mod? Also the sim crashes when I select periscope depth still as well, it runs OK till I do that. Col. __________________ Silent and Violent

03-28-20, 03:16 PM	#9
propbeanie CTD - it's not just a job Join Date: May 2016 Location: One hour from Music City USA! Posts: 10,098 Downloads: 451 Uploads: 2	You order PD, and it crashes when getting to there? You don't have to look outside for it to crash? The game allows radio messages to come in after about PD, so I wonder about that... ?? - When you start a new career and travel on the surface to go on patrol, all is well? You dive to PD and you are OK, and only have trouble when coming back to PD after a deeper dive? Do you only have trouble in the one submarine, but not the other? s7rikeback might know a bit more than me about this ( might... ). We'll see if we can catch his attention, though he has been a busy man of late... __________________ "...and bollocks to the naysayers" - Jimbuna