HELLO

Franck Heler · 01-03-14, 11:05 AM

Hi and Happy new year.Sorry ,I was many time out of contact for many troubles with my Pc.Now a friend give me his old Pc ( Pentium 4).I was playing SH3 (without mods ) two years ago, and now I want to play it again ( with mods ). But I have no experience to install mods and I have some problems.I installed NYGM Tonnage War 2.5 and other apparently compatible mods like :NYGM3_6D.7z , IABL Ships for NYGM New 2.7z , NYGM HiRes submarines 7z , Stiebler 4B_V16B1_Revised and others. I don`t know why no admit NYGM3_New 7z and blocked the load.But the biggest problem is with SH3 Commander 3.2. I was tested install the first NYGM and after SH3 Commander and on the contrary, but the result is the same : my crew move his lips but I no hear what they say.I don`t know what to do . Someone can help me?.

Franck Heler · 01-03-14, 11:59 AM

Hi , I just found that I neither can hear the hidrophone, guns boats, only I hear the environment.Maybe I must move some files? But I don`t know what files and where put it

gi_dan2987 · 01-03-14, 12:08 PM

Quote:

Originally Posted by Franck Heler

Hi , I just found that I neither can hear the hidrophone, guns boats, only I hear the environment.Maybe I must move some files? But I don`t know what files and where put it

I discovered the same when I used NYGM. I would suggest a clean install of SH3, run it to make sure it works, then install GWX3+SH3 Commander. Happy Hunting!

u crank · 01-03-14, 12:48 PM

Welcome to SubSim Franck Heler.

Franck Heler · 01-03-14, 06:47 PM

Thanks for your reply. I have cleaning two times, but the problem no finish,I`ll try othes ways, maybe to a previous version of SH3 Commander.I`ll follow trying.

Aktungbby · 01-03-14, 08:35 PM

Múy facil Capítano; solámente comenzar con SHIII con GWX solo, como aviso el gi_dan, y agregar con cuidado y un mod por un mod después; en su caso: menos es mejor! Buena caza Kaleun!

Jimbuna · 01-04-14, 08:34 AM

Welcome to SubSim Franck

Franck Heler · 01-04-14, 10:39 AM

Hello friends.I`m very happy to be here again. Look: I installed Sh3 1.4 in my pc and charged the game and all is normal.And after I`ll installed SH3 commander and charged the game.When the game is open There are many normal changes, and I think ¨Well, the game works, but I can`t hear the sound files.So that, the problem is not NYGM. Maybe my Sh3 commander version is damaged and I tried with other version and the problem is the same.I don`t know what to do.I`m sorry,always I think Subsim is a good place for lovers of submarines, maybe specially U-Boot,I want make a donation because is necessary keep this place alive. But my economy now is very, very precarious. I`ll make a donation in a future, I hope very soon,and I have no doubt GWX is a great mod.If all the people said sure it`s true. Is one fo my objetives in Subsim,I want to enjoy it like you,but for the moment I must make do with what I have.GWX i one of my objetives ,It`s a new experience,you no doubt.But I`m a stubborn , I`ll have to get it ja ja ja

Gerald · 01-04-14, 01:33 PM

Hello Franck! Give GWX a try from Jimbunas link above, and you will not regret it

Jimbuna · 01-04-14, 01:51 PM

Quote:

Originally Posted by Vendor

Hello Franck! Give GWX a try from Jimbunas link above, and you will not regret it

GWX3.exe http://www.mediafire.com/?rrc1f9j3zhz0p79

GWX3.1 bin http://www.mediafire.com/?i134px2bbp9rnp2

GWX3.2 bin http://www.mediafire.com/?szsdqpy2z56ckeo

GWX3.3 bin http://www.mediafire.com/?mj8wgdkkcrgzn6w

GWX3.4 bin http://www.mediafire.com/?nl8chscc003xswt

GWX3.5 bin http://www.mediafire.com/?2u85d50b8410cm4

GWX3.6 bin http://www.mediafire.com/?qbbl441v9t5rk2u

GWX3.7 bin http://www.mediafire.com/?20ciea1m71z74m7

Mikemike47 · 01-04-14, 04:19 PM

Then you can add GWX additional mods with JSGME after installing GWX 3.0.
SH3 JSGME link here

Franck Heler · 01-05-14, 06:20 PM

Hello friends. Many thanks to all,I received your post and was a surprise, Thanks for your help.I`ve seen the game with GWX and is other game ,it`s a great work.I installed SH3, after GWX3.0 following the instruccions and the game works well.I can see many changes ,the game has other atmosphere,that`s incredible.Now I`ll try install the mods,sure is well.But With SH3 commander I follow having the same problem. After the instalation of SH3 and GWX3 ,i installed SH3 Commander 3.2 and after installed GWX3_SH3Cdr3.2Files_v1.2.exe,but when I load the game I hear the music in the menu and when load naval academy I can`t hear the sound files.If I get it to work I`ll play with SH3Cdr But if not I`ll play with GWX3.I look foward to going to sea.

Jimbuna · 01-06-14, 05:44 AM

Quote:

Originally Posted by Franck Heler

Hello friends. Many thanks to all,I received your post and was a surprise, Thanks for your help.I`ve seen the game with GWX and is other game ,it`s a great work.I installed SH3, after GWX3.0 following the instruccions and the game works well.I can see many changes ,the game has other atmosphere,that`s incredible.Now I`ll try install the mods,sure is well.But With SH3 commander I follow having the same problem. After the instalation of SH3 and GWX3 ,i installed SH3 Commander 3.2 and after installed GWX3_SH3Cdr3.2Files_v1.2.exe,but when I load the game I hear the music in the menu and when load naval academy I can`t hear the sound files.If I get it to work I`ll play with SH3Cdr But if not I`ll play with GWX3.I look foward to going to sea.

You'll be needing the GWX cfg file for SH3 Commander

http://www.mediafire.com/?c4oakjnc3tynwk5

Franck Heler · 01-06-14, 11:36 AM

I don`t know why.I`ve installed SH3 Commander and after SH3 cfgfiles that you send me,but the problem no finish.Maybe my sound card (Sound Blaster Audigy) or Graphic card ( GeForce 4 ti 4400 ) are not suitable?, so I inever think that.The others options I think are : my Sh3 commander.exe is damaged (But I have this file of subsim and I tested others from 24 Flotilla and no work well)And the other option is that I`ve installed the files bad. I was make this:click SH3 Cdr.exe and by default is installed in C:Program files/SH3 Commander . And after, without load the game, click in GWX3_SH3COMMANDER_CFGFiles.exe and by default is installed in the same folder C:Program files/SH3 Commander. AFter load the game and appears the problem.Certainly ,When load SH3 Commander and appears SH3 Commander menu screen, no appear the Rollback symbol. This mean that nothing change?

Franck Heler · 01-07-14, 03:32 PM

Yessss ¡¡¡ Finally I got.After much struggle and your help.My hard disk needed a ¨Defrag¨and after installed SH3, GWX3, SH3Cdr 3.2 and the files Jimbuna send me,I installed the mods Jimbuna send me and others mods for GWX3 ,and one of these last cause me other problem.But without that mod , for the moment the game works well. All I needed was to ¨defrag¨.¡¡¡AAAAhhh¡¡¡ I need to wet my eyebrows at sea again.

Thanks

01-03-14, 11:05 AM	#1
Franck Heler Seaman Join Date: Dec 2012 Location: Madrid Posts: 38 Downloads: 1397 Uploads: 0	HELLO Hi and Happy new year.Sorry ,I was many time out of contact for many troubles with my Pc.Now a friend give me his old Pc ( Pentium 4).I was playing SH3 (without mods ) two years ago, and now I want to play it again ( with mods ). But I have no experience to install mods and I have some problems.I installed NYGM Tonnage War 2.5 and other apparently compatible mods like :NYGM3_6D.7z , IABL Ships for NYGM New 2.7z , NYGM HiRes submarines 7z , Stiebler 4B_V16B1_Revised and others. I don`t know why no admit NYGM3_New 7z and blocked the load.But the biggest problem is with SH3 Commander 3.2. I was tested install the first NYGM and after SH3 Commander and on the contrary, but the result is the same : my crew move his lips but I no hear what they say.I don`t know what to do . Someone can help me?.

01-03-14, 11:59 AM	#2
Franck Heler Seaman Join Date: Dec 2012 Location: Madrid Posts: 38 Downloads: 1397 Uploads: 0	Surprise Hi , I just found that I neither can hear the hidrophone, guns boats, only I hear the environment.Maybe I must move some files? But I don`t know what files and where put it

01-03-14, 12:48 PM	#4
u crank Old enough to know better Join Date: Dec 2011 Location: Prince Edward Island Posts: 11,747 Downloads: 136 Uploads: 0	Welcome to SubSim Franck Heler. __________________ “Two possibilities exist: either we are alone in the Universe or we are not. Both are equally terrifying.” ― Arthur C. Clarke

01-03-14, 06:47 PM	#5
Franck Heler Seaman Join Date: Dec 2012 Location: Madrid Posts: 38 Downloads: 1397 Uploads: 0	Thanks Thanks for your reply. I have cleaning two times, but the problem no finish,I`ll try othes ways, maybe to a previous version of SH3 Commander.I`ll follow trying.

01-03-14, 08:35 PM	#6
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 30,032 Downloads: 24 Uploads: 0	Múy facil Capítano; solámente comenzar con SHIII con GWX solo, como aviso el gi_dan, y agregar con cuidado y un mod por un mod después; en su caso: menos es mejor! Buena caza Kaleun! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

01-04-14, 08:34 AM	#7
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 190,661 Downloads: 63 Uploads: 13	Welcome to SubSim Franck Next __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!!

01-04-14, 10:39 AM	#8
Franck Heler Seaman Join Date: Dec 2012 Location: Madrid Posts: 38 Downloads: 1397 Uploads: 0	Hello friends Hello friends.I`m very happy to be here again. Look: I installed Sh3 1.4 in my pc and charged the game and all is normal.And after I`ll installed SH3 commander and charged the game.When the game is open There are many normal changes, and I think ¨Well, the game works, but I can`t hear the sound files.So that, the problem is not NYGM. Maybe my Sh3 commander version is damaged and I tried with other version and the problem is the same.I don`t know what to do.I`m sorry,always I think Subsim is a good place for lovers of submarines, maybe specially U-Boot,I want make a donation because is necessary keep this place alive. But my economy now is very, very precarious. I`ll make a donation in a future, I hope very soon,and I have no doubt GWX is a great mod.If all the people said sure it`s true. Is one fo my objetives in Subsim,I want to enjoy it like you,but for the moment I must make do with what I have.GWX i one of my objetives ,It`s a new experience,you no doubt.But I`m a stubborn , I`ll have to get it ja ja ja

01-04-14, 01:33 PM	#9
Gerald SUBSIM Newsman Join Date: May 2008 Location: Close to sea Posts: 24,254 Downloads: 553 Uploads: 0	Hello Franck! Give GWX a try from Jimbunas link above, and you will not regret it __________________ Nothing in life is to be feard,it is only to be understood. Marie Curie

01-04-14, 04:19 PM	#11
Mikemike47 Grey Wolf Join Date: Sep 2006 Location: NY Posts: 995 Downloads: 1078 Uploads: 6	Then you can add GWX additional mods with JSGME after installing GWX 3.0. SH3 JSGME link here __________________ JSGME help links and common error solutions

01-05-14, 06:20 PM	#12
Franck Heler Seaman Join Date: Dec 2012 Location: Madrid Posts: 38 Downloads: 1397 Uploads: 0	Surprise!!!! Hello friends. Many thanks to all,I received your post and was a surprise, Thanks for your help.I`ve seen the game with GWX and is other game ,it`s a great work.I installed SH3, after GWX3.0 following the instruccions and the game works well.I can see many changes ,the game has other atmosphere,that`s incredible.Now I`ll try install the mods,sure is well.But With SH3 commander I follow having the same problem. After the instalation of SH3 and GWX3 ,i installed SH3 Commander 3.2 and after installed GWX3_SH3Cdr3.2Files_v1.2.exe,but when I load the game I hear the music in the menu and when load naval academy I can`t hear the sound files.If I get it to work I`ll play with SH3Cdr But if not I`ll play with GWX3.I look foward to going to sea.

01-06-14, 11:36 AM	#14
Franck Heler Seaman Join Date: Dec 2012 Location: Madrid Posts: 38 Downloads: 1397 Uploads: 0	It`s a miiisteeeryy I don`t know why.I`ve installed SH3 Commander and after SH3 cfgfiles that you send me,but the problem no finish.Maybe my sound card (Sound Blaster Audigy) or Graphic card ( GeForce 4 ti 4400 ) are not suitable?, so I inever think that.The others options I think are : my Sh3 commander.exe is damaged (But I have this file of subsim and I tested others from 24 Flotilla and no work well)And the other option is that I`ve installed the files bad. I was make this:click SH3 Cdr.exe and by default is installed in C:Program files/SH3 Commander . And after, without load the game, click in GWX3_SH3COMMANDER_CFGFiles.exe and by default is installed in the same folder C:Program files/SH3 Commander. AFter load the game and appears the problem.Certainly ,When load SH3 Commander and appears SH3 Commander menu screen, no appear the Rollback symbol. This mean that nothing change?

01-07-14, 03:32 PM	#15
Franck Heler Seaman Join Date: Dec 2012 Location: Madrid Posts: 38 Downloads: 1397 Uploads: 0	I GOT¡¡¡¡¡¡¡¡¡¡¡¡ Yessss ¡¡¡ Finally I got.After much struggle and your help.My hard disk needed a ¨Defrag¨and after installed SH3, GWX3, SH3Cdr 3.2 and the files Jimbuna send me,I installed the mods Jimbuna send me and others mods for GWX3 ,and one of these last cause me other problem.But without that mod , for the moment the game works well. All I needed was to ¨defrag¨.¡¡¡AAAAhhh¡¡¡ I need to wet my eyebrows at sea again. Thanks