/3gb 3gb switch XP memory AMD

Thylacine · 12-07-12, 03:10 PM

I just stumbled across the following info which could be of serious interest to any WinXP users in regard to the memory allocation switch:
Service Pack 3 is required to utilise it, and that IF YOU USE AN AMD PROCESSOR IT MAY CAUSE YOUR SYSTEM TO FAIL TO BOOT UNLESS A HOTFIX IS INSTALLED FIRST
See http://www.softwarepatch.com/windows...x0000007E.html for details.
cheers,

ed

Fish In The Water · 12-07-12, 09:53 PM

Thanks for the info!

GT182 · 12-08-12, 03:46 PM

Ed, just to be clear on this... It's for AMD processors only?

IVO · 12-10-12, 12:14 AM

Hi
I am running Win7 32bit 3.5GB ram GTX 560 , I am still thinking on buying SH5.
I did read the SH5 Mod Guide for Beginners and I did 3GB switch yesterday but then today I ran across sites that were in detail
about " Patch Pae" and sites on the windows 7 32bit 4GB Patch. Here is the link on the 4GB limit patch wtih pros and cons.
http://www.howorks.com/2011/02/24/ho...-memory-limit/

Also I found this patch called "PatchPae" here is a short video I found on youtube.

Aslo a MUST READ LINK that is over my head maybe somone can check it out here it is.

**http://blogs.technet.com/b/perfguru/...-switches.aspx

So I know that I cannot have all of them so I am stuck on which method to use. 3gb switch is a small cmd method.
But the 4GB patch has pros and cons.
the PatchPae sounds good cuz it is a patch and also a few cmd types to make but I dont know which to use.

Ivo

Kringelborn · 12-10-12, 03:33 AM

Hi their , You mods creators should not worry about putting our computers through some heavier duty graphics work. Anyone worth their salt will have gotten themselves fitted with the most cutting edge computer. I have upgraded to an Intel i7 with 8 core, 64bit Windows 7, 16Gb onboard memory plus 24Gb RAM installed. Therefore adding up to an incredible insane total of 40Gb of RAM. GTX560 graphics. My computer is not yet being pushed by anything that I have thrown at it. I am not new to subsim but am using a new ID "Kringelborn". I started out some years ago with SilentHunter-2 on my original computer. I really enjoyed SH-2. Then I bought a new computer in 2005 and started using SilentHunter-3. In 11 march 2011 it broke down so to replace it I got my most newest computer just before christmas 2011 ready for working in 2012 onwards and now run SilentHunter-5 on it. The thing about my newest computer is that its high specifications are simply not available on the high street. So I acquired the parts separately from DABS.COM and put it together myself.

THE_MASK · 12-10-12, 04:10 AM

Quote:

Originally Posted by Kringelborn

Hi their , You mods creators should not worry about putting our computers through some heavier duty graphics work. Anyone worth their salt will have gotten themselves fitted with the most cutting edge computer. I have upgraded to an Intel i7 with 8 core, 64bit Windows 7, 16Gb onboard memory plus 24Gb RAM installed. Therefore adding up to an incredible insane total of 40Gb of RAM. GTX560 graphics. My computer is not yet being pushed by anything that I have thrown at it. I am not new to subsim but am using a new ID "Kringelborn". I started out some years ago with SilentHunter-2 on my original computer. I really enjoyed SH-2. Then I bought a new computer in 2005 and started using SilentHunter-3. In 11 march 2011 it broke down so to replace it I got my most newest computer just before christmas 2011 ready for working in 2012 onwards and now run SilentHunter-5 on it. The thing about my newest computer is that its high specifications are simply not available on the high street. So I acquired the parts separately from DABS.COM and put it together myself.

Very nice , a few screenshots of SH5 on full graphics would be nice .

Fish In The Water · 12-10-12, 07:23 AM

Quote:

Originally Posted by Kringelborn

Anyone worth their salt will have gotten themselves fitted with the most cutting edge computer.

Glad you got such an awesome rig, but sadly, not everyone can afford it.

Be that as it may, welcome to Subsim!

IVO · 12-10-12, 12:08 PM

Quote:

Originally Posted by Kringelborn

Hi their , You mods creators should not worry about putting our computers through some heavier duty graphics work. Anyone worth their salt will have gotten themselves fitted with the most cutting edge computer. I have upgraded to an Intel i7 with 8 core, 64bit Windows 7, 16Gb onboard memory plus 24Gb RAM installed. Therefore adding up to an incredible insane total of 40Gb of RAM. GTX560 graphics. My computer is not yet being pushed by anything that I have thrown at it. I am not new to subsim but am using a new ID "Kringelborn". I started out some years ago with SilentHunter-2 on my original computer. I really enjoyed SH-2. Then I bought a new computer in 2005 and started using SilentHunter-3. In 11 march 2011 it broke down so to replace it I got my most newest computer just before christmas 2011 ready for working in 2012 onwards and now run SilentHunter-5 on it. The thing about my newest computer is that its high specifications are simply not available on the high street. So I acquired the parts separately from DABS.COM and put it together myself.

I also started with SH-2 and loved it,, less graphics but really good sim. I hope I will enjoy SH5 when I get it after moding. The explosions look fake or arcadey. Here is a youtube clip of nice graphics and realistic explosions at the end of the clip.

I moded SH-3 with M.E.P.v3 also regular cloths, real sounds, two german flags, all the different cammo or regular skins and others I cannot remember.
SH-2 was realistic with sailing, current, ect. Its interesting to study uboat tactics manuals and use them on a good sim, but I think in the future it will be less of a sim and more of a arcade so all the real tactics wont work.
I need to get a new pc as well but I do have mine running smooth with what I got.

I am still lost on which to use,, 4GB patch // PatchPae // 3GB switch //
Yesterday I did the 3gb switch method

12-07-12, 03:10 PM	#1
Thylacine Watch Join Date: Apr 2012 Location: Australia Posts: 30 Downloads: 513 Uploads: 0	/3gb 3gb switch XP memory AMD I just stumbled across the following info which could be of serious interest to any WinXP users in regard to the memory allocation switch: Service Pack 3 is required to utilise it, and that IF YOU USE AN AMD PROCESSOR IT MAY CAUSE YOUR SYSTEM TO FAIL TO BOOT UNLESS A HOTFIX IS INSTALLED FIRST See http://www.softwarepatch.com/windows...x0000007E.html for details. cheers, ed __________________ I'd rather a bottle in font of me than a frontal lobotomy

12-07-12, 09:53 PM	#2
Fish In The Water Prince of the Sea SUBSIM Welcome Committee Join Date: Jul 2009 Location: Watching over U-253 Posts: 3,527 Downloads: 98 Uploads: 2	Thanks for the info! __________________ "The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people are so full of doubts." - Bertrand Russell.

12-08-12, 03:46 PM	#3
GT182 Ocean Warrior Join Date: May 2005 Location: New Castle of Delaware Posts: 3,231 Downloads: 658 Uploads: 0	Ed, just to be clear on this... It's for AMD processors only? __________________ Gary No Borders, No Language, No Culture =s No Country I'm a Deplorable, and proud of it.

12-10-12, 12:14 AM	#4
IVO Loader Join Date: Jul 2009 Posts: 88 Downloads: 103 Uploads: 0	HELP // 4GB Patch // 3GB switch // Patch Pae ??? Hi I am running Win7 32bit 3.5GB ram GTX 560 , I am still thinking on buying SH5. I did read the SH5 Mod Guide for Beginners and I did 3GB switch yesterday but then today I ran across sites that were in detail about " Patch Pae" and sites on the windows 7 32bit 4GB Patch. Here is the link on the 4GB limit patch wtih pros and cons. http://www.howorks.com/2011/02/24/ho...-memory-limit/ Also I found this patch called "PatchPae" here is a short video I found on youtube. Aslo a MUST READ LINK that is over my head maybe somone can check it out here it is. *http://blogs.technet.com/b/perfguru/...-switches.aspx So I know that I cannot have all of them so I am stuck on which method to use. 3gb switch is a small cmd method. But the 4GB patch has pros and cons. the PatchPae sounds good cuz it is a patch and also a few cmd types to make but I dont know which to use. Ivo Last edited by IVO; 12-11-12 at 01:31 PM.*

12-10-12, 03:33 AM	#5
Kringelborn Bilge Rat Join Date: Nov 2012 Location: UK Posts: 1 Downloads: 28 Uploads: 0	Just built my new computer. Hi their , You mods creators should not worry about putting our computers through some heavier duty graphics work. Anyone worth their salt will have gotten themselves fitted with the most cutting edge computer. I have upgraded to an Intel i7 with 8 core, 64bit Windows 7, 16Gb onboard memory plus 24Gb RAM installed. Therefore adding up to an incredible insane total of 40Gb of RAM. GTX560 graphics. My computer is not yet being pushed by anything that I have thrown at it. I am not new to subsim but am using a new ID "Kringelborn". I started out some years ago with SilentHunter-2 on my original computer. I really enjoyed SH-2. Then I bought a new computer in 2005 and started using SilentHunter-3. In 11 march 2011 it broke down so to replace it I got my most newest computer just before christmas 2011 ready for working in 2012 onwards and now run SilentHunter-5 on it. The thing about my newest computer is that its high specifications are simply not available on the high street. So I acquired the parts separately from DABS.COM and put it together myself.