Works in Progress thread

03-11-10, 06:56 PM

1st,
I'm sorry I was not around for the last 3/4 of a year or so.
Sometimes being Self-Employed means tough decisions.

I never quit working on things for SH3 though!
And became better at doing somethings with all that spare time to burn!

I have 2 major projects at the moment.
Then a trunk full of minor thingys.

The Majors 1st.

The Bathurst!
A proper 3D model is down to the detail work!
Thanks to many Good Friends, I have a collection of images
that has allowed me to do what I think is a great general 3D
presentation of the Bathurst Class.

I've also created new DC Racks,
fully animated,
that look great on this Unit.

Along with several 'Special' animations.
Adrian, My Good Friend, Can be seen if you know where to look!

2nd,
The 9c/40 Schnelltauchback for Kurfürst.

This one took my fancy, then became more important to do
as I learned more about this Sub modification.
The more images I got?
The more work I had to do!
And I've managed to keep file sizes very tight!
So it should cause no strain on older systems!

On to the Minor stuff.

The 9C Turms are close to done.
9C_1 will be sent to Tarjak this weekend for his
evil purposes.
The 9C_2 is nearly done.

An SH4 thing I never finished but does a fairly good job.
Don't have Photoshop to do Normals Mapping?
I wrote a tool that does it for you.
It does the conversion and renames the file for you.
This is a beta version and if interest is high enuff?
I have planned future improvements.
Oddly enuff,
I call it "GWX_Normalizer".

I have several versions of Source Code for Tools
written for SH 3 and 4.
Until I can contact the Original Programmers of the Tools?
I must hold on to any modifications to those Tools.
But they have shown me how to write a few things on my own.
The conversion from thier Source to C++ has been a fun treat.
I greatly enjoyed the mind exercise.
And have a few new Tools planned as time permits.
I want to see a Ship with all Gun and Weapons Nodes
active in a view so I can move them and preview them.
Nuff said.

Now one of my favorites!!

Thunder created the base animations for the Life Boats stuff we did.
He also taught me the basics of doing those animations.
I've been very busy doing animations every since!
I've created a base Skeleton Rig that is scaled and ready to go for
SH3 and SH4!
S3D has made it possible for anyone to import and adjust animation stuff.
I'm giveing you the Rig you need to move the models.
It will come complete with a 3D Model I use, with some adjustments,
to play with.
It's for Mesh animations.
Not KeyFrame.
Though you combine the 2 as is done on DC Racks.

There's also the Kolibri, Corsair, Widgeon, and a few other unfinished Mods
laying about!

I'll be updateing this post with links and images ASAP.

Regards All!
Privateer

TarJak · 03-11-10, 07:04 PM

Woot ! Good to see you back on deck mate!

Can't wait to see the IX turms!

03-11-10, 07:16 PM

I'm finishing up the 9C_1 for shipment to you tomorow.
Watch for a PM Mate.

Damo · 03-11-10, 08:17 PM

With a list like that I'm surprised you're not 'self un-employed'.

Reece · 03-11-10, 11:23 PM

Welcome back mate, sounds like some good stuff brewing!!

03-12-10, 06:18 PM

Quote:

Originally Posted by Damo

With a list like that I'm surprised you're not 'self un-employed'.

I make my living building, improveing, and inventing things
as a Construction Professional.
I love doing the Hands on, get dirty stuff!

So Modding is just my mind never stopping.
And I hate just sitting around watching the Telly.

I wouldn't have a clue how to act if un-employed!
I've not been un-employed in over 37 years!

Myxale · 03-12-10, 06:25 PM

Reading your ToDo llist made my mouth water!

TarJak · 03-12-10, 12:07 AM

Quote:

Originally Posted by privateer

I'm finishing up the 9C_1 for shipment to you tomorow.
Watch for a PM Mate.

Rgr that!

Alex · 03-12-10, 06:18 AM

@ Jeff :

I'll not forget such kindness, J

. You, Sir, will also be part of some project of mine, that I'll release at some time later *runs away

*

Kpt. Lehmann · 03-12-10, 09:31 AM

Quote:

Originally Posted by Alex

@ Jeff :

I'll not forget such kindness, J

. You, Sir, will also be part of some project of mine, that I'll release at some time later *runs away

*

Ummm Alex... Privateer is already married.

You are a bit late, matey.

03-11-10, 06:56 PM	#1
Madox58 Stowaway Posts: n/a Downloads: Uploads:	Works in Progress thread 1st, I'm sorry I was not around for the last 3/4 of a year or so. Sometimes being Self-Employed means tough decisions. I never quit working on things for SH3 though! And became better at doing somethings with all that spare time to burn! I have 2 major projects at the moment. Then a trunk full of minor thingys. The Majors 1st. The Bathurst! A proper 3D model is down to the detail work! Thanks to many Good Friends, I have a collection of images that has allowed me to do what I think is a great general 3D presentation of the Bathurst Class. I've also created new DC Racks, fully animated, that look great on this Unit. Along with several 'Special' animations. Adrian, My Good Friend, Can be seen if you know where to look! 2nd, The 9c/40 Schnelltauchback for Kurfürst. This one took my fancy, then became more important to do as I learned more about this Sub modification. The more images I got? The more work I had to do! And I've managed to keep file sizes very tight! So it should cause no strain on older systems! On to the Minor stuff. The 9C Turms are close to done. 9C_1 will be sent to Tarjak this weekend for his evil purposes. The 9C_2 is nearly done. An SH4 thing I never finished but does a fairly good job. Don't have Photoshop to do Normals Mapping? I wrote a tool that does it for you. It does the conversion and renames the file for you. This is a beta version and if interest is high enuff? I have planned future improvements. Oddly enuff, I call it "GWX_Normalizer". I have several versions of Source Code for Tools written for SH 3 and 4. Until I can contact the Original Programmers of the Tools? I must hold on to any modifications to those Tools. But they have shown me how to write a few things on my own. The conversion from thier Source to C++ has been a fun treat. I greatly enjoyed the mind exercise. And have a few new Tools planned as time permits. I want to see a Ship with all Gun and Weapons Nodes active in a view so I can move them and preview them. Nuff said. Now one of my favorites!! Thunder created the base animations for the Life Boats stuff we did. He also taught me the basics of doing those animations. I've been very busy doing animations every since! I've created a base Skeleton Rig that is scaled and ready to go for SH3 and SH4! S3D has made it possible for anyone to import and adjust animation stuff. I'm giveing you the Rig you need to move the models. It will come complete with a 3D Model I use, with some adjustments, to play with. It's for Mesh animations. Not KeyFrame. Though you combine the 2 as is done on DC Racks. There's also the Kolibri, Corsair, Widgeon, and a few other unfinished Mods laying about! I'll be updateing this post with links and images ASAP. Regards All! Privateer

03-11-10, 08:17 PM	#4
Damo Captain Join Date: May 2009 Location: Forever stuck in Data folder... Posts: 482 Downloads: 259 Uploads: 0	With a list like that I'm surprised you're not 'self un-employed'. __________________ The owl and the pussycat went to sea in a beautiful pea-green boat. It only took one T1 eel to convince that boat not to float.

03-11-10, 11:23 PM	#5
Reece CINC Pacific Fleet Join Date: Sep 2003 Location: Down Under Posts: 34,701 Downloads: 171 Uploads: 0	Welcome back mate, sounds like some good stuff brewing!! __________________ *Sub captains go down with their ship!*

03-12-10, 06:25 PM	#7
Myxale Admiral Join Date: Feb 2006 Location: PQ AN 25 Posts: 2,178 Downloads: 70 Uploads: 0	Reading your ToDo llist made my mouth water! __________________ SH3+GWX SH5+WoS Still Sailing....still Deep

03-12-10, 06:18 AM	#9
Alex Dominant Wolf Join Date: Nov 2006 Posts: 2,143 Downloads: 30 Uploads: 0	@ Jeff : I'll not forget such kindness, J . You, Sir, will also be part of some project of mine, that I'll release at some time later runs away __________________

03-11-10, 07:04 PM	#2
TarJak Fleet Admiral Join Date: Jul 2006 Location: Sydney, Australia Posts: 17,052 Downloads: 150 Uploads: 8	Woot ! Good to see you back on deck mate! Can't wait to see the IX turms!

03-11-10, 07:16 PM	#3
Madox58 Stowaway Posts: n/a Downloads: Uploads:	I'm finishing up the 9C_1 for shipment to you tomorow. Watch for a PM Mate.