Fresh Install Problem

RWevodau · 09-07-09, 09:13 AM

Hello Mates!

I recently decided to get back into SHIII and use the GWX3.0 Supermod. Following the instructions with GWX3.0, I uninstalled SHIII, deleted the relevant folders, and re-installed SHIII from my original DVD. I then installed patch 1.4b, then GWX3.0. When I try to start SHIII, I get a Protection System error. It asks me to put the DVD disk into another drive and try again (I have two DVD drives). I do that and cannot get past the error.

I know this is not a GWX3.0 or SUBSIM problem, but I thought someone here may know something about this problem. Any suggestions?

One thing I did not is that in patching to 1.4b, even though the file name indicates us dvd version 1.4b, the installation program reports that it is updateing from 1.0 to 1.3. Is this just a reporting error, or did I have the wrong patch?

Thank you for any suggestions.

Robert

mookiemookie · 09-07-09, 09:19 AM

Quote:

Originally Posted by RWevodau

One thing I did not is that in patching to 1.4b, even though the file name indicates us dvd version 1.4b, the installation program reports that it is updateing from 1.0 to 1.3. Is this just a reporting error, or did I have the wrong patch?

Thank you for any suggestions.

Robert

Correct. It's just a typo. You did indeed apply the 1.4b patch.

kranz · 09-07-09, 09:19 AM

nah, it is only the file name or caption that is fcked up. You got the right patch. Hmmm-dunno-if it says insert DVD the easiest way is to....insert original dvd. In case you don't have one you should use sth that starts from "c", "a" in the middle and "k" at the end. 5 letters easy riddle but Neal would probably kick our asses for talking about it.

RWevodau · 09-07-09, 09:50 AM

Kranz,

Thanks for the tip. I do have the original dvd disc, and I did try it in another drive, but no luck. The program was working fine before I uninstalled it to prepare for GWX3.0, but now it won't work after the re-install. Very strange.

danlisa · 09-07-09, 09:58 AM

Starforce Protection error.

You won't like this.

1) Uninstall everything.
2) Use the Starforce Removal Tool
3) Use a free registry cleaner - CC Cleaner
4) Reboot.
5) Start Installation + Patch and GWX 3.0 again.

Additionally, if you are using a 64bit Vista OS, there are incompatibilities with Starforce. The only way around this limitation is to find a way for the game to run with NO CD in the drive. *ahem*

My work is done.

RWevodau · 09-07-09, 12:10 PM

danlisa,

Thanks. I tried the steps you suggested but I still get the Protection Error screen. As I said, the sim worked fine until I uninstalled. I don't get it. This is very frustrating. Maybe I'll try purchasing SHIII again via download (it's only $9.95). Is there any reason to believe a fresh start with the download version (instead of my original DVD) would work? I really want to play with GWX3.0, but with a $10 donation to download it from SUBSIM and another $10 to re-purchase it, plus the half day I have already lost trying to get it to work, it's beginning to look like a losing cause.

Robert

mookiemookie · 09-07-09, 12:26 PM

While I'm sure Neal appreciates any and every donation to Subsim, GWX 3.0 is available for download other places for free:

http://www.thegreywolves.com/downloads/

RWevodau · 09-07-09, 12:30 PM

Mookie,

Yeah, I know. I could have downloaded it for free, but I don't mind supporting a web site as helpful and responsive as SUBSIM.

R

Jimbuna · 09-07-09, 12:36 PM

Quote:

Originally Posted by RWevodau

Mookie,

Yeah, I know. I could have downloaded it for free, but I don't mind supporting a web site as helpful and responsive as SUBSIM.

R

Make the donation to the worthy SS cause then enjoy the GWXperience

danlisa · 09-07-09, 01:08 PM

Quote:

Originally Posted by RWevodau

danlisa,

Thanks. I tried the steps you suggested but I still get the Protection Error screen. As I said, the sim worked fine until I uninstalled. I don't get it. This is very frustrating. Maybe I'll try purchasing SHIII again via download (it's only $9.95). Is there any reason to believe a fresh start with the download version (instead of my original DVD) would work? I really want to play with GWX3.0, but with a $10 donation to download it from SUBSIM and another $10 to re-purchase it, plus the half day I have already lost trying to get it to work, it's beginning to look like a losing cause.

Robert

Neal thanks you for your donation.

As for DL SH3, save your money. Your disc version works fine, all that is happening is a file conflict left over from the previous install. Basically the registry files from your previous SH3 install are conflicting with the new SH3 install. GWX has nothing to do with this.

Following an uninstall using windows add/remove, insert the disc and also choose uninstall. Then manually check the C:\Program Files for any residual SH3 folder, also check My Documents for the SH3 folder, delete it. Reboot. Then run a Registry Clean, removing anything UBI or SH3 related (caution if you have other UBI titles). Reboot. Run the Starforce Removal Tool. Reboot.

Now, reinstall SH3 and Patch to 1.4b. DO NOT START the game, remove disc from drive. At this point follow the instructions in your PM.

Back here again, good.

Reboot and try the game using the shortcut from your desktop. If the game works, proceed to install GWX 3.0, using all the core files (1 x exe and 7 x bin files).

Return her eis you have any problems with the GWX installation.

Rafael · 09-07-09, 01:25 PM

Quote:

Originally Posted by danlisa

... proceed to install GWX 3.0, using all the core files (1 x exe and 7 x bin files).

Just wondering, why not install the GWX3_full.exe file and done?

danlisa · 09-07-09, 01:26 PM

Quote:

Originally Posted by Rafael

Just wondering, why not install the GWX3_full.exe file and done?

Because that's not the version available through Subsim.

Rafael · 09-07-09, 01:30 PM

Quote:

Originally Posted by danlisa

Because that's not the version available through Subsim.

Ohhh.... I see

, Jimbuna's filefront page has all the GWX files (and more) no bandwidth for subsim.com.

Jimbuna · 09-07-09, 01:39 PM

Quote:

Originally Posted by Rafael

Ohhh.... I see

, Jimbuna's filefront page has all the GWX files (and more) no bandwidth for subsim.com.

Are you looking for an agents job?

Rafael · 09-07-09, 01:46 PM

Quote:

Originally Posted by jimbuna

Are you looking for an agents job?

Hello mate!

Well actually, I give everybody on subsim.com (GWX players) your FileFront page. You don't get removed by FileFront because of your popularity.

09-07-09, 09:13 AM	#1
RWevodau Swabbie Join Date: May 2004 Location: Delaware, USA Posts: 5 Downloads: 0 Uploads: 0	Fresh Install Problem Hello Mates! I recently decided to get back into SHIII and use the GWX3.0 Supermod. Following the instructions with GWX3.0, I uninstalled SHIII, deleted the relevant folders, and re-installed SHIII from my original DVD. I then installed patch 1.4b, then GWX3.0. When I try to start SHIII, I get a Protection System error. It asks me to put the DVD disk into another drive and try again (I have two DVD drives). I do that and cannot get past the error. I know this is not a GWX3.0 or SUBSIM problem, but I thought someone here may know something about this problem. Any suggestions? One thing I did not is that in patching to 1.4b, even though the file name indicates us dvd version 1.4b, the installation program reports that it is updateing from 1.0 to 1.3. Is this just a reporting error, or did I have the wrong patch? Thank you for any suggestions. Robert

09-07-09, 09:58 AM	#5
danlisa Navy Seal Join Date: Oct 2005 Location: Cornwall, UK Posts: 5,499 Downloads: 45 Uploads: 1	Starforce Protection error. You won't like this. 1) Uninstall everything. 2) Use the Starforce Removal Tool 3) Use a free registry cleaner - CC Cleaner 4) Reboot. 5) Start Installation + Patch and GWX 3.0 again. Additionally, if you are using a 64bit Vista OS, there are incompatibilities with Starforce. The only way around this limitation is to find a way for the game to run with NO CD in the drive. ahem My work is done. __________________

09-07-09, 12:26 PM	#7
mookiemookie Navy Seal Join Date: Nov 2005 Location: Houston, TX Posts: 9,404 Downloads: 105 Uploads: 1	While I'm sure Neal appreciates any and every donation to Subsim, GWX 3.0 is available for download other places for free: http://www.thegreywolves.com/downloads/ __________________ They don’t think it be like it is, but it do. Want more U-boat Kaleun portraits for your SH3 Commander Profiles? Download the SH3 Commander Portrait Pack here.

09-07-09, 09:19 AM	#3
kranz The Old Man Join Date: Aug 2007 Location: Poland Posts: 1,430 Downloads: 5 Uploads: 0	nah, it is only the file name or caption that is fcked up. You got the right patch. Hmmm-dunno-if it says insert DVD the easiest way is to....insert original dvd. In case you don't have one you should use sth that starts from "c", "a" in the middle and "k" at the end. 5 letters easy riddle but Neal would probably kick our asses for talking about it.

09-07-09, 09:50 AM	#4
RWevodau Swabbie Join Date: May 2004 Location: Delaware, USA Posts: 5 Downloads: 0 Uploads: 0	Kranz, Thanks for the tip. I do have the original dvd disc, and I did try it in another drive, but no luck. The program was working fine before I uninstalled it to prepare for GWX3.0, but now it won't work after the re-install. Very strange.

09-07-09, 12:10 PM	#6
RWevodau Swabbie Join Date: May 2004 Location: Delaware, USA Posts: 5 Downloads: 0 Uploads: 0	danlisa, Thanks. I tried the steps you suggested but I still get the Protection Error screen. As I said, the sim worked fine until I uninstalled. I don't get it. This is very frustrating. Maybe I'll try purchasing SHIII again via download (it's only $9.95). Is there any reason to believe a fresh start with the download version (instead of my original DVD) would work? I really want to play with GWX3.0, but with a $10 donation to download it from SUBSIM and another $10 to re-purchase it, plus the half day I have already lost trying to get it to work, it's beginning to look like a losing cause. Robert

09-07-09, 12:30 PM	#8
RWevodau Swabbie Join Date: May 2004 Location: Delaware, USA Posts: 5 Downloads: 0 Uploads: 0	Mookie, Yeah, I know. I could have downloaded it for free, but I don't mind supporting a web site as helpful and responsive as SUBSIM. R