Removal of thermal layers in SH3Cmdr

12-20-13, 02:25 AM

Hi all.

I have a weird feeling that thermal layers are present too often in SH3commander. So I wanted to disable that feature. Now I opened Randomised events.cfg of SH3commander and deleted the part of it where it says:

;----------------------------------------------------------------------------------THERMAL LAYERS
[0:data\Library\AI_Sensors.dat]
;Randomly adjusts active/passive listening device values to simulate the impact of thermal layers - by Hemisent
;Only MinHeight values are changed
ChooseFrom=10
RndMidPat=1
0_x0470=-105 ;AI_Hydrophone
0_x05FC=-90 ;AI_Sonar
0_x0784=-105 ;QGAP
0_x090C=-105 ;QClP
0_x0A94=-105 ;QCeP
0_x0C20=-108 ;Type144P
0_x0DAC=-105 ;Type138P
0_x0F38=-100 ;Type128P
0_x10C4=-100 ;Type123P
0_x124C=-90 ;QGAA
0_x142B=-88 ;QClA
0_x160A=-93 ;QCeA
0_x17ED=-95 ;Type147A
0_x19D0=-98 ;Type144A
0_x1BB3=-85 ;Type128A
0_x1D96=-88 ;Type123A
1_x0470=-150
1_x05FC=-130
1_x0784=-145
1_x090C=-155
1_x0A94=-145
1_x0C20=-150
1_x0DAC=-155
1_x0F38=-144
1_x10C4=-145
1_x124C=-130
1_x142B=-135
1_x160A=-125
1_x17ED=-135
1_x19D0=-130
1_x1BB3=-128
1_x1D96=-132
2_x0470=-180
2_x05FC=-170
2_x0784=-200
2_x090C=-195
2_x0A94=-195
2_x0C20=-215
2_x0DAC=-215
2_x0F38=-190
2_x10C4=-190
2_x124C=-195
2_x142B=-190
2_x160A=-180
2_x17ED=-200
2_x19D0=-190
2_x1BB3=-175
2_x1D96=-175
3_x0470=-235
3_x05FC=-220
3_x0784=-238
3_x090C=-235
3_x0A94=-230
3_x0C20=-235
3_x0DAC=-238
3_x0F38=-230
3_x10C4=-235
3_x124C=-225
3_x142B=-220
3_x160A=-215
3_x17ED=-228
3_x19D0=-225
3_x1BB3=-218
3_x1D96=-215
4_x0470=-270
4_x05FC=-260
4_x0784=-275
4_x090C=-270
4_x0A94=-268
4_x0C20=-275
4_x0DAC=-265
4_x0F38=-263
4_x10C4=-265
4_x124C=-260
4_x142B=-257
4_x160A=-255
4_x17ED=-263
4_x19D0=-260
4_x1BB3=-255
4_x1D96=-253

Saved it and replaced. Will this help to get rid of thermal layers to me ?

rudewarrior · 12-20-13, 01:05 PM

Yes. That will do it.

Alternatively, you could put a semicolon in front of each line.

LGN1 · 12-20-13, 02:15 PM

You can also change the probability by changing the "ChooseFrom=10" line. Currently on average in 5 (0_...4_) of ten cases you will have a thermal layer (50% chance). If you choose "ChooseFrom=100" it would only be in 5% of cases.

12-20-13, 03:07 PM

Thank you both for replies, I will have that in mind what to do if I miss just a tiny little chance of thermal layers occasions

12-20-13, 02:25 AM	#1
sailor_X Stowaway Posts: n/a Downloads: Uploads:	Removal of thermal layers in SH3Cmdr Hi all. I have a weird feeling that thermal layers are present too often in SH3commander. So I wanted to disable that feature. Now I opened Randomised events.cfg of SH3commander and deleted the part of it where it says: ;----------------------------------------------------------------------------------THERMAL LAYERS [0:data\Library\AI_Sensors.dat] ;Randomly adjusts active/passive listening device values to simulate the impact of thermal layers - by Hemisent ;Only MinHeight values are changed ChooseFrom=10 RndMidPat=1 0_x0470=-105 ;AI_Hydrophone 0_x05FC=-90 ;AI_Sonar 0_x0784=-105 ;QGAP 0_x090C=-105 ;QClP 0_x0A94=-105 ;QCeP 0_x0C20=-108 ;Type144P 0_x0DAC=-105 ;Type138P 0_x0F38=-100 ;Type128P 0_x10C4=-100 ;Type123P 0_x124C=-90 ;QGAA 0_x142B=-88 ;QClA 0_x160A=-93 ;QCeA 0_x17ED=-95 ;Type147A 0_x19D0=-98 ;Type144A 0_x1BB3=-85 ;Type128A 0_x1D96=-88 ;Type123A 1_x0470=-150 1_x05FC=-130 1_x0784=-145 1_x090C=-155 1_x0A94=-145 1_x0C20=-150 1_x0DAC=-155 1_x0F38=-144 1_x10C4=-145 1_x124C=-130 1_x142B=-135 1_x160A=-125 1_x17ED=-135 1_x19D0=-130 1_x1BB3=-128 1_x1D96=-132 2_x0470=-180 2_x05FC=-170 2_x0784=-200 2_x090C=-195 2_x0A94=-195 2_x0C20=-215 2_x0DAC=-215 2_x0F38=-190 2_x10C4=-190 2_x124C=-195 2_x142B=-190 2_x160A=-180 2_x17ED=-200 2_x19D0=-190 2_x1BB3=-175 2_x1D96=-175 3_x0470=-235 3_x05FC=-220 3_x0784=-238 3_x090C=-235 3_x0A94=-230 3_x0C20=-235 3_x0DAC=-238 3_x0F38=-230 3_x10C4=-235 3_x124C=-225 3_x142B=-220 3_x160A=-215 3_x17ED=-228 3_x19D0=-225 3_x1BB3=-218 3_x1D96=-215 4_x0470=-270 4_x05FC=-260 4_x0784=-275 4_x090C=-270 4_x0A94=-268 4_x0C20=-275 4_x0DAC=-265 4_x0F38=-263 4_x10C4=-265 4_x124C=-260 4_x142B=-257 4_x160A=-255 4_x17ED=-263 4_x19D0=-260 4_x1BB3=-255 4_x1D96=-253 Saved it and replaced. Will this help to get rid of thermal layers to me ?

12-20-13, 01:05 PM	#2
rudewarrior Sonar Guy Join Date: Apr 2005 Location: Middlebury, VT, USA Posts: 378 Downloads: 165 Uploads: 2	Yes. That will do it. Alternatively, you could put a semicolon in front of each line.

12-20-13, 02:15 PM	#3
LGN1 Ace of the Deep Join Date: Mar 2006 Posts: 1,138 Downloads: 147 Uploads: 12	You can also change the probability by changing the "ChooseFrom=10" line. Currently on average in 5 (0_...4_) of ten cases you will have a thermal layer (50% chance). If you choose "ChooseFrom=100" it would only be in 5% of cases.

12-20-13, 03:07 PM	#4
sailor_X Stowaway Posts: n/a Downloads: Uploads:	Thank you both for replies, I will have that in mind what to do if I miss just a tiny little chance of thermal layers occasions