![]() |
SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997 |
![]() |
#1 |
Eternal Patrol
![]() Join Date: Mar 2006
Location: CATALINA IS. SO . CAL USA
Posts: 10,108
Downloads: 511
Uploads: 0
|
S.O.S. To All Susim Members Help
I hope one of you great members can help me figure what went wrong with my rig.
I'll start with specs then what started to happen and then what i've attempted and results as it stands now. Intel P4 2.4oa GHz 1mb L2 Cach 533 Mhz PGA-478 Gigabyte GA-8IPE1000-G 2GB DDR 400 RAM NiVidia GeFORCE 7600GT 512 mb ddr2 8x m MAXTOR 320 sata hdd x2 ULTRA X-CONNECT2 550 watt ULTRA XG Quantum case Septre 22" widescreen 1200:1 2ms 1680x1050 Was doing same thing i'm doing now and clicked sumit and it locked up. Lostall control over comp.Wouldn't let END PROGRAM and cursor was locked. Had to hit restart button. It rebooted and still locked up. Hit start button and at first rebooted then finally wouldn't reboot and just black screen. Had to manualy shut down. In the end it would start to reboot but would shtdown on it;s own in about 5 seconds. Have swapped out vid card with 6600gt that was in my working shop rig so I know it's good. No luck. Then swapped in same CPU still no luck. CPU fan that gets power from MB is spinning so I'm figureing MB is OK. I've done all I can think of and need any and all help I can get. I'm at the moment useing a borrowed laptop so I'll be awhile checking back. Thank You to all in advance. FIREWALL ![]() |
![]() |
![]() |
![]() |
#2 |
Ace of the Deep
![]() Join Date: Jul 2007
Location: The details of my life are quite inconsequential
Posts: 1,049
Downloads: 4
Uploads: 0
|
![]()
Check the hard drive... If your files are being corrupted, it can cause this kind of behavior...
__________________
If your target has a 30 degree AOB, the range from his base course line equals the current range divided by 2. |
![]() |
![]() |
![]() |
#3 |
Captain
![]() Join Date: Jan 2007
Location: Tennessee
Posts: 546
Downloads: 17
Uploads: 0
|
![]()
Is your MOBO shorting out? If there is enough dust on your MOBO it could assorb moistore and cause it to short out making it reboot like that. Try reformating your drive.
__________________
![]() |
![]() |
![]() |
![]() |
#4 |
Grey Wolf
|
![]()
How about software/virus or a driver issue?
If you reboot into safe mode, does the same thing happen?
__________________
DOLPHIN 38 |
![]() |
![]() |
![]() |
#5 |
Stowaway
Posts: n/a
Downloads:
Uploads:
|
![]()
I had very similar behaviour when my C: drive went boom , If it is your Boot HDD then theres only one thing you can do , buy a new HDD and startover
![]() |
![]() |
![]() |
#6 |
Ace of the Deep
![]() Join Date: Sep 2006
Location: York. Northern England.
Posts: 1,004
Downloads: 0
Uploads: 0
|
![]()
From similar experiences with my own machine, I think it might be an idea to replace all the data cables to your hard drives. SATA cables are very susceptible to damage. That would be my place to look before you spend money on new drives. As SATA data cables are fairly cheap, buy at least two sets to try incase of batch errors in production. As others have said, one of the drives could be the source of the problem.
__________________
![]() Fate opposes me in vitality and morality, forced ever onward, burdened, always in shackles. So this very moment, without tarrying, pluck the quivering strings. Because fate punishes the one who plays, all lament with me. (http://hosted.filefront.com/KatherineRowan) |
![]() |
![]() |
![]() |
#7 |
Soaring
|
![]()
Remove one item at a time and see if rebooting functions: RAM bars (if you have several), soundcard, graphics card, USB-connected items, i short: remove everything that is not vital for windows booting. If any of these items is damaged, it could interrupt the booting sequence.
__________________
If you feel nuts, consult an expert. |
![]() |
![]() |
![]() |
#8 |
Fleet Admiral
![]() |
![]()
It does sound like either a MB or HDD hardware problem. If you've installed a new card or RAM or anything that is likely to flex the MB, then it may be a fracture. If no hardware has been recently changed it's most likely HDD related.
|
![]() |
![]() |
![]() |
#9 |
Eternal Patrol
![]() Join Date: Mar 2006
Location: CATALINA IS. SO . CAL USA
Posts: 10,108
Downloads: 511
Uploads: 0
|
![]()
Hi Guys
![]() I have some new info. I can only hope it further helps in solveing my problem. This morning I tried a bootup and got a yellow triangle in center of monitor. Inside this triangle is an icon of a computer case on left to the right a red ! mark in center, below it a red X and to the right of the red ! mark a icon of a monitor. My friend brought over his LCD and 7800 GS vid card and got same image. He has no idea either whats going wrong on my rig. I hope this can narrow things a bit maybe. Sorry I haven't posted sooner. I used a borrowed laptop to post thread yesterday. Good God it had white keys with black letters. It was blinding me to use it. I bought a new laptop last nite so I can look and reply to all posts. First thing I saw was pic and link to post #128 about Leo\Dave and I just couldn't bring myself to come to this thread. Will post on new thread with specs if anyones interested. Thanks Again for all help and replys. |
![]() |
![]() |
![]() |
#10 |
Rear Admiral
![]() Join Date: Apr 2005
Posts: 11,866
Downloads: 0
Uploads: 0
|
![]()
That sounds like a 90% chance your Power Supply just went south for the winter - permanently.
Try a new PSU. BIOS or some other thing like the Northbridge could also be going bad, but I'd seriously suspect your PSU (based on the info you have provided - this is my best guess). -S |
![]() |
![]() |
![]() |
#11 |
Eternal Patrol
![]() Join Date: Mar 2006
Location: CATALINA IS. SO . CAL USA
Posts: 10,108
Downloads: 511
Uploads: 0
|
![]()
Thx SUBMAN1 But it's not PS. Have a 600watt backup that has been never used that came with case and no difference.
Just to be on the safe side my buddy figured since most of his rig was already here he, went and got the rest of it and with a working puter we step by step swapped everthing out one by one testing as we went along and had same responce. ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#12 |
The Old Man
![]() Join Date: Jul 2003
Location: Central MO
Posts: 1,562
Downloads: 6
Uploads: 0
|
![]()
Since you swapped out everything, the only thing left is your mobo.
|
![]() |
![]() |
![]() |
#13 | |
Rear Admiral
![]() Join Date: Apr 2005
Posts: 11,866
Downloads: 0
Uploads: 0
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#14 |
Eternal Patrol
![]() Join Date: Mar 2006
Location: CATALINA IS. SO . CAL USA
Posts: 10,108
Downloads: 511
Uploads: 0
|
![]()
I'm worried that might be the case.
![]() I have another friend bringing over a 3.0 478 socket cpu in about an hour that is currently working in his spare rig. This is about the only thing left but the mobo. ![]() Please everybody find something else " cheap " that I can test. ![]() Thx Again Everybody and keep the ideas comming. ![]() |
![]() |
![]() |
![]() |
#15 | |
Rear Admiral
![]() Join Date: Apr 2005
Posts: 11,866
Downloads: 0
Uploads: 0
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
|
|