Time compression limited to 4 when...

Nuoz · 06-02-07, 07:02 AM

When close to the coast or traveling in a channel/river. Well, in the first two campaign missions (patrols) i've made i found out that i only have fuel to complete the mission IF i go tru the channel near the starting spot. That can take hours real time! This is jus sailing! Another question, how do i resupply my boat? Please say the exact procedure. I've tried allied random cost cities with no success (enter docks, Esc Exit patrol, right?)

Mueller72 · 06-02-07, 07:07 AM

Get yourself SH3 Cmdr

http://www.subsim.com/radioroom/showthread.php?t=101815

That gives you the possibility to change compression time limitations. You can also give yourself a mission target PQ which fits better with your base/fuel....

For the refueling, i think it only works in blue harbours (I use GWX supermod, don't know if that changes something).

Have Fun!

irish1958 · 06-02-07, 08:20 AM

To refuel, you have to dock at the port or supply ship. When you restart your mission, you will be resupplied with stores, fuel, torpedos, etc. You will also be repaired to 100%. When you start, you will be assigned to a "null" grid. There are some programs that will allow you to assign a grid to your boat.

06-02-07, 04:26 PM

Go to "My Documents" and locate the "SH3" folder. Open it and click on data, then cfg, then main.cfg file (The path is My Documents/SH3/data/cfg/main.cfg file)

In the second section of the main.cfg file you will see [Time Compression]. Change "LandProximity=4" to "LandProximity=128" and save this file; you'll no longer have a problem in the Kiel Canal.

I've also changed AirEnemyDetect to = 0 so that the game will pause when there aircraft spotted. Also, I reduced EnemyDetect to = 1, however this is a little agrevating when in harbor traffic but I like the time compression to go to 1 when an enemy is spotted.

Hope this is helpful.

Nuoz · 06-02-07, 07:31 PM

It was helpful. Thank you!
Thank you both!

Canovaro · 06-03-07, 04:32 AM

I would recommend (but there's a taste for everybody):

[TIME COMPRESSION]
TimeStop=0
RealTime=1
LandProximity=256
CriticalDamage=1
CrewEfficiency=1
AirEnemyDetected=1
SoundEffects=2
CharacterAnim=4
EnemyDetected=1
RadioReport=2048
Particles=8
PrayState=64
HunterState=64
3DRender=32
Maximum=2048

Remember, at 64x or higher, the crew do not get more tired.

kvbrock82 · 07-10-07, 08:06 AM

quickie about refuelling..

1) How do i find these 'milk cows' you all speak of?

2) If i dock in a port to refuel/resupply before i complete my mission(24 hour patrol of grid) and the grid turns to null, does this mean my mission will result as incomplete?

cheers

STEED · 07-10-07, 08:17 AM

Quote:

Originally Posted by kvbrock82

quickie about refuelling..

1) How do i find these 'milk cows' you all speak of?

2) If i dock in a port to refuel/resupply before i complete my mission(24 hour patrol of grid) and the grid turns to null, does this mean my mission will result as incomplete?

cheers

1. Look at your map or press the F1 key for info.

2. Yes your mission is scrub and you can do what the heck you like go any where and have fun.

STEED · 07-10-07, 08:18 AM

SH3 is all you need for your time compression issues.

kvbrock82 · 07-10-07, 08:25 AM

Quote:

Originally Posted by STEED

Quote:

Originally Posted by kvbrock82

quickie about refuelling..

1) How do i find these 'milk cows' you all speak of?

2) If i dock in a port to refuel/resupply before i complete my mission(24 hour patrol of grid) and the grid turns to null, does this mean my mission will result as incomplete?

cheers

1. Look at your map or press the F1 key for info.

2. Yes your mission is scrub and you can do what the heck you like go any where and have fun.

so the help screen provides the locations? nice

re no.2, Will the mission be a failure? will renown be lost?

3. while im at it, if i am under attack on the surface and i report contact on my messages screen, is backup supposed to come help out if i am off northern france? ive tried reporting contacts but ive never seen any help

thanks again

CapZap1970 · 07-10-07, 09:42 AM

Quote:

Originally Posted by kvbrock82

Quote:

Originally Posted by STEED

Quote:

Originally Posted by kvbrock82

quickie about refuelling..

1) How do i find these 'milk cows' you all speak of?

2) If i dock in a port to refuel/resupply before i complete my mission(24 hour patrol of grid) and the grid turns to null, does this mean my mission will result as incomplete?

cheers

1. Look at your map or press the F1 key for info.

2. Yes your mission is scrub and you can do what the heck you like go any where and have fun.

so the help screen provides the locations? nice

re no.2, Will the mission be a failure? will renown be lost?

3. while im at it, if i am under attack on the surface and i report contact on my messages screen, is backup supposed to come help out if i am off northern france? ive tried reporting contacts but ive never seen any help

thanks again

No, the mission will not be a failure and you won't loose renown your already earned, but you might not earn more renown...
About your second question... I am not sure, but if you stay there long enough, help will eventually arrive. Notice that it takes quite some time before a fighter gets there.

CapZap

mowgli99 · 07-10-07, 11:28 AM

ya i have the same problem with the canal. When i use the said path (My documents...etc.) when i try to open main.cgf it says it cant open:hmm: . Do you know what i should do? Its not a big deal though

ichso · 07-10-07, 11:32 AM

What does it say exactly why it can't open the file ?

mowgli99 · 07-10-07, 11:39 AM

It says "You need to click open with button" When i click it it says windows cant open because it needs to know what program was used to create it. Under that it says "what do you want to do?" 1. find program on internet or 2. select the program from a list. Does that make any sense.

danlisa · 07-10-07, 11:40 AM

Quote:

Originally Posted by mowgli99

ya i have the same problem with the canal. When i use the said path (My documents...etc.) when i try to open main.cgf it says it cant open:hmm: . Do you know what i should do? Its not a big deal though

To open the file, use the option to 'Select the program from a list...' then select Notepad from the list.

However, if you are using GWX and you are trying to manually plot the canal, why? GWX has an auto plot option. Before even moving from your starting position, goto the Nav Officers orders and choose 'Plot Search Pattern' there will be an option for Kiel Outbound or Inbound. This will automatically plot the waypoints through the canal in the most optimal way. This will allow you to TC through the canal @ 128 (64 in places).

06-02-07, 07:02 AM	#1
Nuoz Sparky Join Date: Mar 2002 Location: Here Posts: 155 Downloads: 5 Uploads: 0	Time compression limited to 4 when... When close to the coast or traveling in a channel/river. Well, in the first two campaign missions (patrols) i've made i found out that i only have fuel to complete the mission IF i go tru the channel near the starting spot. That can take hours real time! This is jus sailing! Another question, how do i resupply my boat? Please say the exact procedure. I've tried allied random cost cities with no success (enter docks, Esc Exit patrol, right?) __________________ "Listen, 'sir', it's real simple. Add the number of times we dive to the number of times we surface. Divide that number by two. If the result doesn't come out even, don't open the hatch"

06-02-07, 08:20 AM	#3
irish1958 Ocean Warrior Join Date: Apr 2005 Location: Carmel, Indiana Posts: 3,250 Downloads: 320 Uploads: 11	To refuel, you have to dock at the port or supply ship. When you restart your mission, you will be resupplied with stores, fuel, torpedos, etc. You will also be repaired to 100%. When you start, you will be assigned to a "null" grid. There are some programs that will allow you to assign a grid to your boat. __________________ Irish1958

06-02-07, 04:26 PM	#4
von Zelda Stowaway Posts: n/a Downloads: Uploads:	Here's the answer for time compression near land Go to "My Documents" and locate the "SH3" folder. Open it and click on data, then cfg, then main.cfg file (The path is My Documents/SH3/data/cfg/main.cfg file) In the second section of the main.cfg file you will see [Time Compression]. Change "LandProximity=4" to "LandProximity=128" and save this file; you'll no longer have a problem in the Kiel Canal. I've also changed AirEnemyDetect to = 0 so that the game will pause when there aircraft spotted. Also, I reduced EnemyDetect to = 1, however this is a little agrevating when in harbor traffic but I like the time compression to go to 1 when an enemy is spotted. Hope this is helpful.

06-02-07, 07:31 PM	#5
Nuoz Sparky Join Date: Mar 2002 Location: Here Posts: 155 Downloads: 5 Uploads: 0	It was helpful. Thank you! Thank you both! __________________ "Listen, 'sir', it's real simple. Add the number of times we dive to the number of times we surface. Divide that number by two. If the result doesn't come out even, don't open the hatch" Last edited by Nuoz; 06-02-07 at 07:46 PM.

07-10-07, 08:18 AM	#9
STEED Lucky Jack Join Date: Jan 2006 Location: Down Town UK Posts: 27,695 Downloads: 89 Uploads: 48	SH3 is all you need for your time compression issues. __________________ Dr Who rest in peace 1963-2017. To borrow Davros saying...I NAME YOU CHIBNALL THE DESTROYER OF DR WHO YOU KILLED IT!

06-02-07, 07:07 AM	#2
Mueller72 Seaman Join Date: Apr 2007 Location: Berlin Posts: 40 Downloads: 27 Uploads: 0	Get yourself SH3 Cmdr http://www.subsim.com/radioroom/showthread.php?t=101815 That gives you the possibility to change compression time limitations. You can also give yourself a mission target PQ which fits better with your base/fuel.... For the refueling, i think it only works in blue harbours (I use GWX supermod, don't know if that changes something). Have Fun!

06-03-07, 04:32 AM	#6
Canovaro Ace of the Deep Join Date: Mar 2007 Location: Netherlands Posts: 1,062 Downloads: 34 Uploads: 0	I would recommend (but there's a taste for everybody): [TIME COMPRESSION] TimeStop=0 RealTime=1 LandProximity=256 CriticalDamage=1 CrewEfficiency=1 AirEnemyDetected=1 SoundEffects=2 CharacterAnim=4 EnemyDetected=1 RadioReport=2048 Particles=8 PrayState=64 HunterState=64 3DRender=32 Maximum=2048 Remember, at 64x or higher, the crew do not get more tired.

07-10-07, 08:06 AM	#7
kvbrock82 Electrician's Mate Join Date: Jul 2007 Location: Malta Posts: 137 Downloads: 240 Uploads: 0	quickie about refuelling.. 1) How do i find these 'milk cows' you all speak of? 2) If i dock in a port to refuel/resupply before i complete my mission(24 hour patrol of grid) and the grid turns to null, does this mean my mission will result as incomplete? cheers

07-10-07, 11:28 AM	#12
mowgli99 Engineer Join Date: Jun 2007 Posts: 215 Downloads: 0 Uploads: 0	ya i have the same problem with the canal. When i use the said path (My documents...etc.) when i try to open main.cgf it says it cant open:hmm: . Do you know what i should do? Its not a big deal though

07-10-07, 11:32 AM	#13
ichso Ace of the Deep Join Date: Jul 2005 Location: Germany's oldest city alive Posts: 1,066 Downloads: 57 Uploads: 0	What does it say exactly why it can't open the file ? __________________ My Subskins: http://www.subsim.com/radioroom/showthread.php?t=164169

07-10-07, 11:39 AM	#14
mowgli99 Engineer Join Date: Jun 2007 Posts: 215 Downloads: 0 Uploads: 0	It says "You need to click open with button" When i click it it says windows cant open because it needs to know what program was used to create it. Under that it says "what do you want to do?" 1. find program on internet or 2. select the program from a list. Does that make any sense.