VIIC with turm/4

alamwuhk2a · 05-10-07, 09:33 AM

Currently I modified the stock turm/4 to fit on my VIIC, while keeping my deck gun. However, my deck gun is just inside the turm, clipping. Can I move the turm a bit backward so that my deck gun shows? And one thing, I don't want to modify the VIIC.dat, since I don't want to affect other turms. Any ideas? Thx

Mush Martin · 05-10-07, 09:37 AM

Easier I think to slide the gun fwd a yard but I dont think theres
a way to do it with just the configs.

MM

Spytrx · 05-10-07, 10:13 AM

I have the same problem with those placings - there's got to be a way to see a map of coordinates on the boot, but I reckon that is in the .dat file itself and I am no good with hex editors so all I hope for is that either Ubi is finally caving in and giving us the SDK (but that won't happen anymore apparently because it would allow people to bypass the security settings) or somebody cleverer than me to come up cracking the layout plan...

DivingDuck · 05-10-07, 10:48 AM

Moin,

Quote:

Originally Posted by alamwuhk2a

Currently I modified the stock turm/4 to fit on my VIIC, while keeping my deck gun. However, my deck gun is just inside the turm, clipping. Can I move the turm a bit backward so that my deck gun shows? And one thing, I don't want to modify the VIIC.dat, since I don't want to affect other turms. Any ideas? Thx

how about createing a new turm folder, copying the stock turm there and cloneing it? Then move the turm´s pivot to its front (with a 3d programme). This will set the turm a few inches/yards backwards. But that´s just an idea.

Regards,
DD

HunterICX · 05-10-07, 12:22 PM

Quote:

Originally Posted by DivingDuck

Moin,

Quote:

Originally Posted by alamwuhk2a

Currently I modified the stock turm/4 to fit on my VIIC, while keeping my deck gun. However, my deck gun is just inside the turm, clipping. Can I move the turm a bit backward so that my deck gun shows? And one thing, I don't want to modify the VIIC.dat, since I don't want to affect other turms. Any ideas? Thx

how about createing a new turm folder, copying the stock turm there and cloneing it? Then move the turm´s pivot to its front (with a 3d programme). This will set the turm a few inches/yards backwards. But that´s just an idea.

Regards,
DD

what about the crew on the bridge?
wouldnt they be floating in the sky?

Spytrx · 05-10-07, 03:05 PM

Quote:

Originally Posted by DivingDuck

Moin,
how about createing a new turm folder, copying the stock turm there and cloneing it? Then move the turm´s pivot to its front (with a 3d programme). This will set the turm a few inches/yards backwards. But that´s just an idea.

Regards,
DD

thought about that, but that seems even more complicated than finding the coordinates to place the gun - besides, I like the look of the sail as it is

all I want is to add the cannon again...

05-10-07, 08:02 PM

Move the M01 node forward about 1.5 meters.
But that will apply to all subs that use that hull.

alamwuhk2a · 05-10-07, 09:48 PM

However, which node in the dat file of the turm is the pivot? I have to do it in hex since I have no 3D Programme

, though I know how to hex

05-10-07, 10:05 PM

there is no node that determines the pivot in the Turm.
You must move the object with a 3D program.
You can edit the node on the hull that the turm sits on
but again, it will affect all turms that sit on this hull.

05-10-07, 09:33 AM	#1
alamwuhk2a Helmsman Join Date: Jul 2006 Location: Hong Kong Posts: 107 Downloads: 12 Uploads: 0	VIIC with turm/4 Currently I modified the stock turm/4 to fit on my VIIC, while keeping my deck gun. However, my deck gun is just inside the turm, clipping. Can I move the turm a bit backward so that my deck gun shows? And one thing, I don't want to modify the VIIC.dat, since I don't want to affect other turms. Any ideas? Thx __________________ Come from the secret Hong Kong U-boat base

05-10-07, 09:37 AM	#2
Mush Martin Eternal Patrol Join Date: Dec 2006 Posts: 4,398 Downloads: 4 Uploads: 0	Easier I think to slide the gun fwd a yard but I dont think theres a way to do it with just the configs. MM __________________ RIP Mush Tutorial

05-10-07, 09:48 PM	#8
alamwuhk2a Helmsman Join Date: Jul 2006 Location: Hong Kong Posts: 107 Downloads: 12 Uploads: 0	However, which node in the dat file of the turm is the pivot? I have to do it in hex since I have no 3D Programme , though I know how to hex __________________ Come from the secret Hong Kong U-boat base

05-10-07, 10:13 AM	#3
Spytrx Medic Join Date: Apr 2007 Location: Cornwall, UK Posts: 167 Downloads: 0 Uploads: 0	I have the same problem with those placings - there's got to be a way to see a map of coordinates on the boot, but I reckon that is in the .dat file itself and I am no good with hex editors so all I hope for is that either Ubi is finally caving in and giving us the SDK (but that won't happen anymore apparently because it would allow people to bypass the security settings) or somebody cleverer than me to come up cracking the layout plan...

05-10-07, 08:02 PM	#7
Madox58 Stowaway Posts: n/a Downloads: Uploads:	Move the M01 node forward about 1.5 meters. But that will apply to all subs that use that hull.

05-10-07, 10:05 PM	#9
Madox58 Stowaway Posts: n/a Downloads: Uploads:	there is no node that determines the pivot in the Turm. You must move the object with a 3D program. You can edit the node on the hull that the turm sits on but again, it will affect all turms that sit on this hull.