![]() |
SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997 |
![]() |
#1 |
Sparky
![]() Join Date: Jun 2006
Location: NY
Posts: 153
Downloads: 144
Uploads: 0
|
![]()
I have only a PCI slot and I need a card with 2.0 shader support.
Any ideas? Thank you in advance. |
![]() |
![]() |
![]() |
#2 |
Navy Seal
![]() |
![]()
PCI or PCI-E?
|
![]() |
![]() |
![]() |
#3 |
Samurai Navy
![]() Join Date: Apr 2005
Posts: 579
Downloads: 2
Uploads: 0
|
![]()
If it's really just PCI, I think it's time for a new computer. The best I could find is an X1300, generally. Hightech has an X1550, but it's a dual-slot card which requires you to have two adjacent open PCI slots to use.
__________________
We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, that we are now qualified to do anything with nothing. |
![]() |
![]() |
![]() |
#4 |
Torpedoman
![]() Join Date: Feb 2007
Location: Scotland
Posts: 117
Downloads: 5
Uploads: 0
|
![]()
Yup, if you're stuck with plain-old PCI, chances are the rest of the PC won't be up to scratch either, so, even if you did manage to find a PCI card that would do the job (unlikely), the CPU & RAM would probably let you down...
|
![]() |
![]() |
![]() |
#5 | |
Sparky
![]() Join Date: Jun 2006
Location: NY
Posts: 153
Downloads: 144
Uploads: 0
|
![]() Quote:
I have a dell optiplex not the tower version and it has a slot for a low profile agp though |
|
![]() |
![]() |
![]() |
#6 | |
Sparky
![]() Join Date: Jun 2006
Location: NY
Posts: 153
Downloads: 144
Uploads: 0
|
![]() Quote:
the only draw back is it is a desk top and not a tower |
|
![]() |
![]() |
![]() |
#7 | |
Sparky
![]() Join Date: Jun 2006
Location: NY
Posts: 153
Downloads: 144
Uploads: 0
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#8 |
Sparky
![]() Join Date: Jun 2006
Location: NY
Posts: 153
Downloads: 144
Uploads: 0
|
![]()
Thank you
|
![]() |
![]() |
![]() |
#9 | |
Torpedoman
![]() Join Date: Feb 2007
Location: Scotland
Posts: 117
Downloads: 5
Uploads: 0
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#10 |
Samurai Navy
![]() Join Date: Apr 2005
Posts: 579
Downloads: 2
Uploads: 0
|
![]()
Actually, if he has a low-profile AGP he can really do something. They aren't quite the same power level as the PCI-E cards out there, but there are AGP versions of the 7800GS and X1950 graphics cards available, typically for around $200 US.
__________________
We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, that we are now qualified to do anything with nothing. |
![]() |
![]() |
![]() |
#11 |
Torpedoman
![]() Join Date: Feb 2007
Location: Scotland
Posts: 117
Downloads: 5
Uploads: 0
|
![]()
I stand corrected...
![]() |
![]() |
![]() |
![]() |
#12 |
Ace of the Deep
![]() Join Date: Nov 2002
Location: No-good Missouri scum
Posts: 1,223
Downloads: 43
Uploads: 0
|
![]()
Yikes...
Low profile doesn't just mean the width of the card board itself, it also means a shorter plate too for his computer. Might take some searching to find one, or you may get lucky and be able to cut part of the plate off it to make her fit.
__________________
"When Gary told me he had found Jesus, I thought, Yahoo! We're rich! But it turned out to be something different." - Jack Handey |
![]() |
![]() |
![]() |
#13 |
Torpedoman
![]() Join Date: Feb 2007
Location: Scotland
Posts: 117
Downloads: 5
Uploads: 0
|
![]()
Hmmm... that's the "low-profile" I was referring to, i.e., half-height backplate versions. I've always had a problem sourcing low-profile but reasonably high-spec cards for customers in our shop, specifically those who are unwilling to shell-out for a whole new PC.
|
![]() |
![]() |
![]() |
#14 |
Ace of the Deep
![]() Join Date: Nov 2002
Location: No-good Missouri scum
Posts: 1,223
Downloads: 43
Uploads: 0
|
![]()
Yep, they're a pain in the @ss.
![]()
__________________
"When Gary told me he had found Jesus, I thought, Yahoo! We're rich! But it turned out to be something different." - Jack Handey |
![]() |
![]() |
![]() |
#15 |
Sea Lord
![]() Join Date: Mar 2005
Location: Grid CH 26, Spain ,Barcelona
Posts: 1,857
Downloads: 204
Uploads: 0
|
![]()
Any good card for an AGP slot ?? and not very expensive
![]() 7XXX or Ati equivalent
__________________
But this ship can't sink!... She is made of iron, sir. I assure you, she can. and she will. It is a mathematical certainty. Strength and honor |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|