GW installl error

Tommy111478 · 10-04-06, 10:47 PM

I am trying to install the gw mod on a clean install and I keep getting an error message any help would be appreciated

_Seth_ · 10-04-06, 11:15 PM

Patch SH3 to the 1.4b before installing GW.
patch here:

http://www.silent-hunteriii.com/uk/updates.php

Tommy111478 · 10-04-06, 11:37 PM

I tried but how do you know if it was sucessful. I downloaded 1.4 on a clean install the game was never on this computer.

kylania · 10-04-06, 11:46 PM

After installing the 1.4b patch (keep in mind the "Congrats you've just installed!" message after the patch will say "1.3", ignore that. Load the game and look at the little scrolly line at the bottom of the main menu. It should say "1.4" there, if it does, you're set.

If you have the disk space for it, I like to COPY my freshly patched 1.4b install to a folder called backup so that if I do have issues with installing something, I don't need to fully install again, I can just copy the backup I made.

Download ALL the files for GW 1.1a (TGW11a.exe and TGW11a-1.bin through TGW11a-4.bin) and run the TGW11a.exe. That should go ahead and install GW for you.

If you get an error, can you please type the exact error here so we can help troubleshoot it? Good luck and enjoy GW!

Tommy111478 · 10-04-06, 11:48 PM

ok it doesn't look like the install is there. It says it was intalled sucessfully but when I run the game it isn't there where you said it should be.

Tommy111478 · 10-05-06, 12:14 AM

ok I can't even get the patch to work any help US DVD version. I am sure I am well above the system specs any ideas. No this is a store bought version not a crack or anything.

kylania · 10-05-06, 01:24 AM

Ok, so you have the US DVD version of the game? The barcode on the back of your DVD box should read "0 08888 68195 3"? Correct? Ensure that it is, and redownload this file:

http://patches.ubi.com/silent_hunter...vd_1.4b_us.exe

That's the 1.4b patch for the US edition DVD install.

While that's downloading, lets make sure we're starting from scratch.

First, delete any installed version you have so far in the following directory:

C:\program files\ubisoft\silenthunterIII

Delete any other places you've installed Silent Hunter III as well, perhaps the copy I'd mentioned before.

Next, delete the SH3 folder in your My Documents folder and everything below it:

C:\Documents And Settings\YOURUSERNAME\My Documents\SH3

You should be "clean" now. Next install the game normally, with all defaults, from the DVD. DO NOT PATCH YET.

Start the game up and make sure it works, maybe even start a single mission. Make sure it all looks/sounds/acts like you expect.

If it does, by now the patch should be downloaded, so run that patch file. Again, accept all defaults. After it's finished run the game again and test it again as before. If everything is working you should be good to go.

If any of that didn't work, post the exact error messages here please.

Now it's time to install GW. First lets make sure you have a valid install and all the files you need. Find the GW install files and right click on each and check Properties. Check the "Size: 170 MB (178,751,648 bytes)" line and ensure they have the same file sizes as listed here:

TGW11a-1.bin: Icon says 174,563KB - Properties Size: 170 MB (178,751,648 bytes)
TGW11a-2.bin: Icon says 175,098KB - Properties Size: 170 MB (179,300,000 bytes)
TGW11a-3.bin: Icon says 175,098KB - Properties Size: 170 MB (179,300,000 bytes)
TGW11a-4.bin: Icon says 174,956KB - Properties Size: 170 MB (179,154,367 bytes)
TGW11a.exe: Icon says 535KB - Properties Size: 535 KB (547,845 bytes)

If all those files sizes look right, go ahead and run TGW11a.exe by double clicking on it and accept all defaults.

After it's installed, test the game as before. Hopefully it'll work. Again, if it doesn't post any exact error messages here please.

Tuddley3 · 10-05-06, 05:53 AM

Or after installing Gameshadow, have it install the patch for you.

bigboywooly · 10-05-06, 06:10 AM

Quote:

Originally Posted by kylania

Ok, so you have the US DVD version of the game? The barcode on the back of your DVD box should read "0 08888 68195 3"? Correct? Ensure that it is, and redownload this file:

http://patches.ubi.com/silent_hunter...vd_1.4b_us.exe

That's the 1.4b patch for the US edition DVD install.

While that's downloading, lets make sure we're starting from scratch.

First, delete any installed version you have so far in the following directory:

C:\program files\ubisoft\silenthunterIII

Delete any other places you've installed Silent Hunter III as well, perhaps the copy I'd mentioned before.

Next, delete the SH3 folder in your My Documents folder and everything below it:

C:\Documents And Settings\YOURUSERNAME\My Documents\SH3

You should be "clean" now. Next install the game normally, with all defaults, from the DVD. DO NOT PATCH YET.

Start the game up and make sure it works, maybe even start a single mission. Make sure it all looks/sounds/acts like you expect.

If it does, by now the patch should be downloaded, so run that patch file. Again, accept all defaults. After it's finished run the game again and test it again as before. If everything is working you should be good to go.

If any of that didn't work, post the exact error messages here please.

Now it's time to install GW. First lets make sure you have a valid install and all the files you need. Find the GW install files and right click on each and check Properties. Check the "Size: 170 MB (178,751,648 bytes)" line and ensure they have the same file sizes as listed here:

TGW11a-1.bin: Icon says 174,563KB - Properties Size: 170 MB (178,751,648 bytes)
TGW11a-2.bin: Icon says 175,098KB - Properties Size: 170 MB (179,300,000 bytes)
TGW11a-3.bin: Icon says 175,098KB - Properties Size: 170 MB (179,300,000 bytes)
TGW11a-4.bin: Icon says 174,956KB - Properties Size: 170 MB (179,154,367 bytes)
TGW11a.exe: Icon says 535KB - Properties Size: 535 KB (547,845 bytes)

If all those files sizes look right, go ahead and run TGW11a.exe by double clicking on it and accept all defaults.

After it's installed, test the game as before. Hopefully it'll work. Again, if it doesn't post any exact error messages here please.

Nice one

Tommy111478 · 10-05-06, 09:59 AM

ok I have done everything stated above and the patch will not take effect? any ideas on that. I have check all the directories are correct and the patch says it was sucessful but when I start the game it doesn't say 1.4 any ideas

Sailor Steve · 10-05-06, 10:57 AM

Only one idea, and it's a fact: the devs forgot to update the label. If it says "1.3" you have the correct 1.4b patch. You're fine.

10-04-06, 10:47 PM	#1
Tommy111478 Swabbie Join Date: Sep 2006 Posts: 13 Downloads: 0 Uploads: 0	GW installl error I am trying to install the gw mod on a clean install and I keep getting an error message any help would be appreciated

10-04-06, 11:15 PM	#2
_Seth_ Ocean Warrior Join Date: Dec 2005 Location: In Tromsoe, @Tirpitz' final resting place.. Posts: 3,277 Downloads: 94 Uploads: 0	Patch SH3 to the 1.4b before installing GW. patch here: http://www.silent-hunteriii.com/uk/updates.php __________________

10-04-06, 11:46 PM	#4
kylania Silent Hunter Join Date: Aug 2006 Posts: 3,528 Downloads: 118 Uploads: 0	After installing the 1.4b patch (keep in mind the "Congrats you've just installed!" message after the patch will say "1.3", ignore that. Load the game and look at the little scrolly line at the bottom of the main menu. It should say "1.4" there, if it does, you're set. If you have the disk space for it, I like to COPY my freshly patched 1.4b install to a folder called backup so that if I do have issues with installing something, I don't need to fully install again, I can just copy the backup I made. Download ALL the files for GW 1.1a (TGW11a.exe and TGW11a-1.bin through TGW11a-4.bin) and run the TGW11a.exe. That should go ahead and install GW for you. If you get an error, can you please type the exact error here so we can help troubleshoot it? Good luck and enjoy GW! __________________

10-05-06, 01:24 AM	#7
kylania Silent Hunter Join Date: Aug 2006 Posts: 3,528 Downloads: 118 Uploads: 0	Ok, so you have the US DVD version of the game? The barcode on the back of your DVD box should read "0 08888 68195 3"? Correct? Ensure that it is, and redownload this file: http://patches.ubi.com/silent_hunter...vd_1.4b_us.exe That's the 1.4b patch for the US edition DVD install. While that's downloading, lets make sure we're starting from scratch. First, delete any installed version you have so far in the following directory: C:\program files\ubisoft\silenthunterIII Delete any other places you've installed Silent Hunter III as well, perhaps the copy I'd mentioned before. Next, delete the SH3 folder in your My Documents folder and everything below it: C:\Documents And Settings\YOURUSERNAME\My Documents\SH3 You should be "clean" now. Next install the game normally, with all defaults, from the DVD. DO NOT PATCH YET. Start the game up and make sure it works, maybe even start a single mission. Make sure it all looks/sounds/acts like you expect. If it does, by now the patch should be downloaded, so run that patch file. Again, accept all defaults. After it's finished run the game again and test it again as before. If everything is working you should be good to go. If any of that didn't work, post the exact error messages here please. Now it's time to install GW. First lets make sure you have a valid install and all the files you need. Find the GW install files and right click on each and check Properties. Check the "Size: 170 MB (178,751,648 bytes)" line and ensure they have the same file sizes as listed here: TGW11a-1.bin: Icon says 174,563KB - Properties Size: 170 MB (178,751,648 bytes) TGW11a-2.bin: Icon says 175,098KB - Properties Size: 170 MB (179,300,000 bytes) TGW11a-3.bin: Icon says 175,098KB - Properties Size: 170 MB (179,300,000 bytes) TGW11a-4.bin: Icon says 174,956KB - Properties Size: 170 MB (179,154,367 bytes) TGW11a.exe: Icon says 535KB - Properties Size: 535 KB (547,845 bytes) If all those files sizes look right, go ahead and run TGW11a.exe by double clicking on it and accept all defaults. After it's installed, test the game as before. Hopefully it'll work. Again, if it doesn't post any exact error messages here please. __________________

10-05-06, 10:57 AM	#11
Sailor Steve Eternal Patrol Join Date: Nov 2002 Location: High in the mountains of Utah Posts: 50,369 Downloads: 745 Uploads: 249	Only one idea, and it's a fact: the devs forgot to update the label. If it says "1.3" you have the correct 1.4b patch. You're fine. __________________ “Never do anything you can't take back.” —Rocky Russo

10-04-06, 11:37 PM	#3
Tommy111478 Swabbie Join Date: Sep 2006 Posts: 13 Downloads: 0 Uploads: 0	I tried but how do you know if it was sucessful. I downloaded 1.4 on a clean install the game was never on this computer.

10-04-06, 11:48 PM	#5
Tommy111478 Swabbie Join Date: Sep 2006 Posts: 13 Downloads: 0 Uploads: 0	ok it doesn't look like the install is there. It says it was intalled sucessfully but when I run the game it isn't there where you said it should be.

10-05-06, 12:14 AM	#6
Tommy111478 Swabbie Join Date: Sep 2006 Posts: 13 Downloads: 0 Uploads: 0	ok I can't even get the patch to work any help US DVD version. I am sure I am well above the system specs any ideas. No this is a store bought version not a crack or anything.

10-05-06, 05:53 AM	#8
Tuddley3 Grey Wolf Join Date: Aug 2006 Location: Augusta, Maine USA Posts: 905 Downloads: 170 Uploads: 0	Or after installing Gameshadow, have it install the patch for you.

10-05-06, 09:59 AM	#10
Tommy111478 Swabbie Join Date: Sep 2006 Posts: 13 Downloads: 0 Uploads: 0	ok I have done everything stated above and the patch will not take effect? any ideas on that. I have check all the directories are correct and the patch says it was sucessful but when I start the game it doesn't say 1.4 any ideas