SH4 Repair Crews

Phantom II · 04-20-10, 08:39 AM

So I just started playing SH4 with TMO. While I was out on my first patrol, I got attacked by a Jap plane and took some pretty bad damage. I put a team on damage control, but they don't seem to be fixing anything? I've waited for about 4 days under time compression, and the priority list is just the same as it was when I left it. Is there some sort of trick to it?

tomoose · 04-20-10, 09:05 AM

I'm assuming you mean you've physically dragged crew members into the damage control spots. You may need to fill all the spots depending on the damage. If you've done that then they will be working on the damaged parts. Go to your sub status screen (the tab with the cogs on it) and you'll see all the damaged parts in red (and your sub damage percentage in the upper left which IIRC if over 90 means you're basically SOL). In the bottom center should be a 'list' of the parts being repaired by priority with each one having a little 'bar' on the right side. If you mouseover this 'bar' it should display a number ratio. This should change if the part is being fixed.

Make sure you are not on silent running as the damage control won't do anything if silent running is on.

Lastly, it could be that your sub is simply too damaged to repair. Post a screenshot of your sub status screen and your crew status screen. This will help to nail down the problem.
good luck.

BillBam · 04-20-10, 09:07 AM

Are you running silent? Have you called crew to "repair stations?" Is the damage of the type that needs you to be surfaced and you are not? Just a few thinks I could think of that would prevent the repair happening.

Phantom II · 04-20-10, 09:58 AM

Silent Running is off, and the damage control crew is full. We're on battle stations and I have enabled the damage control team. Seems like a bug :/

TH0R · 04-20-10, 12:31 PM

Maybe the damage is irreparable? If the compartment / equipment is fully red...

Excelsior82 · 04-20-10, 01:15 PM

I also noted some glitches when it comes to repair deck gun or flak. These can be marked as damaged but aren't in fact.

To correct this, I take control of the flak/gun for a few seconds and I suddenly get a message about it's repaired now.

Stranger, after a save/load, it can be marked damaged back

Maybe you can screenshot the damage control view to enable us telling you why it may not be repaired ?

Armistead · 04-21-10, 08:54 PM

Another bug that often happens like the CO2 bug is your men will not go into repair mode. If you have damage in a compartment and on battlestations, place your mouse over the men in the compartment, they should list as repairing. If they list as on stations, they're not fixing. You just have to save and reload to clear the bug out. Happens more if you save a lot or tab out a lot...

04-20-10, 08:39 AM	#1
Phantom II Electrician's Mate Join Date: Jan 2006 Posts: 139 Downloads: 33 Uploads: 0	SH4 Repair Crews So I just started playing SH4 with TMO. While I was out on my first patrol, I got attacked by a Jap plane and took some pretty bad damage. I put a team on damage control, but they don't seem to be fixing anything? I've waited for about 4 days under time compression, and the priority list is just the same as it was when I left it. Is there some sort of trick to it? __________________

04-20-10, 09:05 AM	#2
tomoose Grey Wolf Join Date: Aug 2005 Posts: 930 Downloads: 23 Uploads: 0	Repair screen I'm assuming you mean you've physically dragged crew members into the damage control spots. You may need to fill all the spots depending on the damage. If you've done that then they will be working on the damaged parts. Go to your sub status screen (the tab with the cogs on it) and you'll see all the damaged parts in red (and your sub damage percentage in the upper left which IIRC if over 90 means you're basically SOL). In the bottom center should be a 'list' of the parts being repaired by priority with each one having a little 'bar' on the right side. If you mouseover this 'bar' it should display a number ratio. This should change if the part is being fixed. Make sure you are not on silent running as the damage control won't do anything if silent running is on. Lastly, it could be that your sub is simply too damaged to repair. Post a screenshot of your sub status screen and your crew status screen. This will help to nail down the problem. good luck.

04-20-10, 09:58 AM	#4
Phantom II Electrician's Mate Join Date: Jan 2006 Posts: 139 Downloads: 33 Uploads: 0	Silent Running is off, and the damage control crew is full. We're on battle stations and I have enabled the damage control team. Seems like a bug :/ __________________

04-20-10, 12:31 PM	#5
TH0R XO Join Date: Jul 2009 Location: Croatia Posts: 420 Downloads: 52 Uploads: 0	Maybe the damage is irreparable? If the compartment / equipment is fully red... __________________ *My IL2 stuff:* LEVEL BOMBING MANUAL v2.0 \| 'MUSTANG'

04-20-10, 09:07 AM	#3
BillBam Watch Officer Join Date: Mar 2010 Location: Yuba/Sutter, CA Posts: 347 Downloads: 171 Uploads: 0	Are you running silent? Have you called crew to "repair stations?" Is the damage of the type that needs you to be surfaced and you are not? Just a few thinks I could think of that would prevent the repair happening.

04-20-10, 01:15 PM	#6
Excelsior82 Seaman Join Date: Apr 2010 Location: Sens, France Posts: 31 Downloads: 11 Uploads: 0	I also noted some glitches when it comes to repair deck gun or flak. These can be marked as damaged but aren't in fact. To correct this, I take control of the flak/gun for a few seconds and I suddenly get a message about it's repaired now. Stranger, after a save/load, it can be marked damaged back Maybe you can screenshot the damage control view to enable us telling you why it may not be repaired ?

04-21-10, 08:54 PM	#7
Armistead Rear Admiral Join Date: Dec 2008 Location: on the Dan Posts: 10,880 Downloads: 364 Uploads: 0	Another bug that often happens like the CO2 bug is your men will not go into repair mode. If you have damage in a compartment and on battlestations, place your mouse over the men in the compartment, they should list as repairing. If they list as on stations, they're not fixing. You just have to save and reload to clear the bug out. Happens more if you save a lot or tab out a lot...