Question for Subsim Scale Modelers

TLAM Strike · 01-20-11, 11:17 PM

Its been a very long time since I built any models (like 10 years) but I decided to build a couple, mostly as a decoration for my computer desk. I just ordered them, they are the Doyusha 1/700 scale Kilo SSK and Akula SSN models. I purposely chose the small ones since I don't want them becoming clutter, and they will fit nicely on top of my computer tower or monitor.

Now my question is what paints should I use? Specifically for the (red) anti fouling below the waterline and the props. I have a spray can of flat black enamel paint from Home Depot (It was let over from another project), should I use that for the hull as a base color or use something else?

BTW I don't have an airbrush and don't plan on buying one.

Sledgehammer427 · 01-21-11, 12:53 AM

Well, I'm not an authority on paint, but I always start with a couple coats of primer to take down that semi glossy sheen off the parts, followed by whatever colors I am using after.

A good hardware store usually has a good selection of paints for whatever shades you are using, especially red. Tamiya makes great paint, but thats brush on, and I brush painted my K-19 model, it turned out nicely.

01-21-11, 11:15 PM

Quote:

Originally Posted by TLAM Strike

Its been a very long time since I built any models (like 10 years) but I decided to build a couple, mostly as a decoration for my computer desk. I just ordered them, they are the Doyusha 1/700 scale Kilo SSK and Akula SSN models. I purposely chose the small ones since I don't want them becoming clutter, and they will fit nicely on top of my computer tower or monitor.

Now my question is what paints should I use? Specifically for the (red) anti fouling below the waterline and the props. I have a spray can of flat black enamel paint from Home Depot (It was let over from another project), should I use that for the hull as a base color or use something else?

BTW I don't have an airbrush and don't plan on buying one.

Display models are always more colorful than the actual boat, thus the red anti-fouling paint often depicted on modern SSN models. (all flat black on the real deal, anechoic tiles you know.)

If you think it important to use red there are a couple of options in rattle cans. A rustoleum primer with a reddish-brown cap and a gloss red which you will prolly have to dull-coat. The dull-coat isn't a bad idea in either case after all the paint is applied. It will help blend everything together and allow for the inevitable hand holding.

My two cents.

TLAM Strike · 01-30-11, 01:19 AM

nearly finished my Kilo and Akula...

sorry for the the crappy pics but they are the best my netbook's webcam can do...

FIREWALL · 01-30-11, 03:00 AM

I think they look Great.

01-20-11, 11:17 PM	#1
TLAM Strike Navy Seal Join Date: Apr 2002 Location: Rochester, New York Posts: 8,633 Downloads: 29 Uploads: 6	Question for Subsim Scale Modelers Its been a very long time since I built any models (like 10 years) but I decided to build a couple, mostly as a decoration for my computer desk. I just ordered them, they are the Doyusha 1/700 scale Kilo SSK and Akula SSN models. I purposely chose the small ones since I don't want them becoming clutter, and they will fit nicely on top of my computer tower or monitor. Now my question is what paints should I use? Specifically for the (red) anti fouling below the waterline and the props. I have a spray can of flat black enamel paint from Home Depot (It was let over from another project), should I use that for the hull as a base color or use something else? BTW I don't have an airbrush and don't plan on buying one. __________________

01-21-11, 12:53 AM	#2
Sledgehammer427 PacWagon Join Date: Jun 2007 Location: Drinking coffee and staring at trees in Massachusetts Posts: 2,908 Downloads: 287 Uploads: 0	Well, I'm not an authority on paint, but I always start with a couple coats of primer to take down that semi glossy sheen off the parts, followed by whatever colors I am using after. A good hardware store usually has a good selection of paints for whatever shades you are using, especially red. Tamiya makes great paint, but thats brush on, and I brush painted my K-19 model, it turned out nicely. __________________ Cold Waters Voice Crew - Fire Control Officer Cmdr O. Myers - C/O USS Nautilus (SS-168) 114,000 tons sunk - 4 Spec Ops completed V-boat Nutcase - Need supplies? Japanese garrison on a small island in the way? Just give us a call! D4C!

01-30-11, 01:19 AM	#4
TLAM Strike Navy Seal Join Date: Apr 2002 Location: Rochester, New York Posts: 8,633 Downloads: 29 Uploads: 6	nearly finished my Kilo and Akula... sorry for the the crappy pics but they are the best my netbook's webcam can do... __________________

01-30-11, 03:00 AM	#5
FIREWALL Eternal Patrol Join Date: Mar 2006 Location: CATALINA IS. SO . CAL USA Posts: 10,108 Downloads: 511 Uploads: 0	I think they look Great. __________________ RIP FIREWALL I Play GWX. Silent Hunter Who ???