How to run SH3 in windowed mode, any resolution

Fincuan · 10-20-08, 01:30 PM

Evening gents

As many of you know SH3 is locked to 1024x768 when running in windowed mode. For many Ati Radeon plus a 5:4-resolution TFT-panel users running it in full screen is not an option without circles not being circles etc, so you either suffer from that or run it in a small window.

Here's how to overrun the lock:

Get the resolution fix if you don't already have it, and set SH3 as if you'd run it in full-screen mode using your custom resolution. If you want a faultless picture then it HAS TO BE a 4:3 resolution, for example 1280x960.
Get D3D Windower and unzip it to someplace on your hard-drive. No installation is needed.
Set up an SH3-profile for D3D Windower following these instructions. Just substitute "Klingon Academy"( ) with SH3 and you'll be fine. There's a few exceptions though: for window width and height we'll use our custom 4:3 resolution decided above, and disabling DX7 options doesn't seem to be necessary(= more testing needed).
Enjoy the game!

I still haven't figured out how to get this to work without starting SH3 via D3D Windower, so if you have any ideas I'm all ears. Using D3D Windower the way I described prevents you from using SH3 Commander.

This method should work with just about any D3D game. I'm also running Navy Field the same way.

richardphat · 10-20-08, 10:39 PM

Quote:

Originally Posted by Fincuan

Evening gents

As many of you know SH3 is locked to 1024x768 when running in windowed mode. For many Ati Radeon plus a 5:4-resolution TFT-panel users running it in full screen is not an option without circles not being circles etc, so you either suffer from that or run it in a small window.

Here's how to overrun the lock:

Get the resolution fix if you don't already have it, and set SH3 as if you'd run it in full-screen mode using your custom resolution. If you want a faultless picture then it HAS TO BE a 4:3 resolution, for example 1280x960.
Get D3D Windower and unzip it to someplace on your hard-drive. No installation is needed.
Set up an SH3-profile for D3D Windower following these instructions. Just substitute "Klingon Academy"( ) with SH3 and you'll be fine. There's a few exceptions though: for window width and height we'll use our custom 4:3 resolution decided above, and disabling DX7 options doesn't seem to be necessary(= more testing needed).
Enjoy the game!

I still haven't figured out how to get this to work without starting SH3 via D3D Windower, so if you have any ideas I'm all ears. Using D3D Windower the way I described prevents you from using SH3 Commander.

This method should work with just about any D3D game. I'm also running Navy Field the same way.

BUMP BUBMP BUMP!!! WHAT did you say NavyField??? OMG i tried to run it on window mode but never made it success! GEeez Im lucky to bump on your post!

Fincuan · 10-21-08, 06:39 AM

Yeah Navy Field also works, and that's actually how I found this program. I got tired of NF looking pretty bad when running full-screen on a 1280x1024 display, and after a short Googling session found this. After that SH3 came into my mind as another candidate.

richardphat · 10-21-08, 04:42 PM

I have drag both application to D3D window. But some of the describtion are written in jap or korean , i went on their guide.......

By richardphat at 2008-10-21

richardphat · 10-21-08, 04:48 PM

ok i just read the instruction but still i tried to apply the same thing over D3D......... no result

Fincuan · 10-21-08, 05:32 PM

You can see my settings below. Those are probably not the optimal ones, but at least NF runs with them. I always run the game straight from D3D Windower. No changes were made to the "Window Mode" tab.

richardphat · 10-21-08, 05:37 PM

Ok ty pal im trying this right away im finishing my match agaisnt bravo

richardphat · 10-21-08, 05:49 PM

Hmm i think my graphic hardrive does not support it. I copy exatly your setting. Anyways thx for the helps, even im a bit disapointed that d3d didnt work for me

Fincuan · 10-21-08, 06:15 PM

Well, I don't know what to do then. Did you remember to close and restart(has to be done for some reason) D3DWindower after changing the settings?

richardphat · 10-21-08, 07:45 PM

Yes i did that.

Scape · 05-14-10, 12:13 AM

Is it possible to run the with Commander? Also, the http://klingonacademy.3dactionplanet...00&postcount=2
is a dead link. I can't get this to run.

timmy41 · 05-14-10, 01:41 AM

wow, cool. i hope this works for me!

Fincuan · 05-14-10, 02:14 AM

Wow, someone still found this one

Here's an updated link, which I also edited to the first post: http://www.klingonacademy.com/showpo...00&postcount=2

Scape · 05-14-10, 09:10 PM

Still running 1024x768!! Dammit. I guess it doesn't work with commander then?

10-20-08, 01:30 PM	#1
Fincuan Admiral Join Date: Aug 2007 Location: Suomi, sauna, puukko, perkele Posts: 2,346 Downloads: 39 Uploads: 0	How to run SH3 in windowed mode, any resolution Evening gents As many of you know SH3 is locked to 1024x768 when running in windowed mode. For many Ati Radeon plus a 5:4-resolution TFT-panel users running it in full screen is not an option without circles not being circles etc, so you either suffer from that or run it in a small window. Here's how to overrun the lock: Get the resolution fix if you don't already have it, and set SH3 as if you'd run it in full-screen mode using your custom resolution. If you want a faultless picture then it HAS TO BE a 4:3 resolution, for example 1280x960. Get D3D Windower and unzip it to someplace on your hard-drive. No installation is needed. Set up an SH3-profile for D3D Windower following these instructions. Just substitute "Klingon Academy"( ) with SH3 and you'll be fine. There's a few exceptions though: for window width and height we'll use our custom 4:3 resolution decided above, and disabling DX7 options doesn't seem to be necessary(= more testing needed). Enjoy the game! I still haven't figured out how to get this to work without starting SH3 via D3D Windower, so if you have any ideas I'm all ears. Using D3D Windower the way I described prevents you from using SH3 Commander. This method should work with just about any D3D game. I'm also running Navy Field the same way. Last edited by Fincuan; 05-14-10 at 02:13 AM.

10-21-08, 04:42 PM	#4
richardphat Seasoned Skipper Join Date: Apr 2008 Location: Canada Posts: 682 Downloads: 17 Uploads: 0	I have drag both application to D3D window. But some of the describtion are written in jap or korean , i went on their guide....... By richardphat at 2008-10-21 Last edited by richardphat; 10-21-08 at 04:56 PM.

10-21-08, 06:39 AM	#3
Fincuan Admiral Join Date: Aug 2007 Location: Suomi, sauna, puukko, perkele Posts: 2,346 Downloads: 39 Uploads: 0	Yeah Navy Field also works, and that's actually how I found this program. I got tired of NF looking pretty bad when running full-screen on a 1280x1024 display, and after a short Googling session found this. After that SH3 came into my mind as another candidate.

10-21-08, 04:48 PM	#5
richardphat Seasoned Skipper Join Date: Apr 2008 Location: Canada Posts: 682 Downloads: 17 Uploads: 0	ok i just read the instruction but still i tried to apply the same thing over D3D......... no result

10-21-08, 05:32 PM	#6
Fincuan Admiral Join Date: Aug 2007 Location: Suomi, sauna, puukko, perkele Posts: 2,346 Downloads: 39 Uploads: 0	You can see my settings below. Those are probably not the optimal ones, but at least NF runs with them. I always run the game straight from D3D Windower. No changes were made to the "Window Mode" tab.

10-21-08, 05:37 PM	#7
richardphat Seasoned Skipper Join Date: Apr 2008 Location: Canada Posts: 682 Downloads: 17 Uploads: 0	Ok ty pal im trying this right away im finishing my match agaisnt bravo

10-21-08, 05:49 PM	#8
richardphat Seasoned Skipper Join Date: Apr 2008 Location: Canada Posts: 682 Downloads: 17 Uploads: 0	Hmm i think my graphic hardrive does not support it. I copy exatly your setting. Anyways thx for the helps, even im a bit disapointed that d3d didnt work for me

10-21-08, 06:15 PM	#9
Fincuan Admiral Join Date: Aug 2007 Location: Suomi, sauna, puukko, perkele Posts: 2,346 Downloads: 39 Uploads: 0	Well, I don't know what to do then. Did you remember to close and restart(has to be done for some reason) D3DWindower after changing the settings?

10-21-08, 07:45 PM	#10
richardphat Seasoned Skipper Join Date: Apr 2008 Location: Canada Posts: 682 Downloads: 17 Uploads: 0	Yes i did that.

05-14-10, 12:13 AM	#11
Scape Gunner Join Date: Jul 2007 Location: Kanada Posts: 92 Downloads: 57 Uploads: 0	Is it possible to run the with Commander? Also, the http://klingonacademy.3dactionplanet...00&postcount=2 is a dead link. I can't get this to run.

05-14-10, 01:41 AM	#12
timmy41 Weps Join Date: Mar 2010 Posts: 367 Downloads: 9 Uploads: 0	wow, cool. i hope this works for me!

05-14-10, 02:14 AM	#13
Fincuan Admiral Join Date: Aug 2007 Location: Suomi, sauna, puukko, perkele Posts: 2,346 Downloads: 39 Uploads: 0	Wow, someone still found this one Here's an updated link, which I also edited to the first post: http://www.klingonacademy.com/showpo...00&postcount=2

05-14-10, 09:10 PM	#14
Scape Gunner Join Date: Jul 2007 Location: Kanada Posts: 92 Downloads: 57 Uploads: 0	Still running 1024x768!! Dammit. I guess it doesn't work with commander then?