![]() |
SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997 |
|
![]() |
#1 |
Admiral
![]() Join Date: Jan 2008
Location: New York State, USA
Posts: 2,390
Downloads: 126
Uploads: 7
|
![]()
At the request of Lt Cmdr Lare, I have written a Career Start for Midway. It uses the same missions and subs that would be assigned if you were sailing from Pearl Harbor. (I did not have time to rewrite new mission for it.)
Copy to your MODs folder and enable with JSGME. It overwrites the "CareerStart.upc" and the "Flotillas.upc" so will conflict with any mods that make changes to these files. I did not have time to test every sub in every Career start date, so report any errors you run into. Date and sub used would be helpful to debug. It is uploaded in the SH4/Gameplay Mods section of Subsim. http://www.subsim.com/radioroom/down...=1270&act=down Free with no restriction on use. If you use it in another MOD a credit is not necessary but would be appreciated. Peabody
__________________
System Spec: Gigabyte GA-965P-DS3, PentiumD Dual Core Presler 945 3.4Ghz, Gigabyte Geforce 7600GS, 2-1GB Corsair XMS2 800Mhz in Dual Channel, 2-WD 250 SATA 3Gb/s, Onboard Realtek HD 7.1 Audio, DVD ROM, DVD burner, Hiper 580 Watt Power supply, WinXP SP2. |
![]() |
![]() |
![]() |
#2 |
The Old Man
![]() Join Date: Apr 2004
Location: The Shifting, Whispering Sands, NM
Posts: 1,463
Downloads: 10
Uploads: 0
|
Peabody Sir,
You the man
![]() |
![]() |
![]() |
![]() |
#3 |
Grey Wolf
![]() Join Date: Feb 2005
Location: southlyon michigan
Posts: 897
Downloads: 781
Uploads: 35
|
i dont think so because tmo changes the files that would conflict with this mod but im not absolutley sure on it but im almost positive that you would get a ctd if you use this in tmo v1.8
lt commander lare |
![]() |
![]() |
![]() |
#4 |
Grey Wolf
![]() Join Date: Feb 2005
Location: southlyon michigan
Posts: 897
Downloads: 781
Uploads: 35
|
and thanks again peabody for this and for everyone here that has helped me its much appreciated i will be gone all day tomorrow family reunion so will be back on on sunday take care until then happy hunting and good shooting
lt commander lare |
![]() |
![]() |
![]() |
#5 |
Admiral
![]() Join Date: Jan 2008
Location: New York State, USA
Posts: 2,390
Downloads: 126
Uploads: 7
|
![]()
I do not have TMO. Check the MOD:
Data/UPCData/UPCCampaignData If there is are Careerstart.upc and Flotilla.upc files in that folder then this will overwrite them, so it will not work. It was written for stock. I did not have a lot of time to do this right now, so I just did it quickly. It can be made to work with any MODs but it would take some time. Peabody
__________________
System Spec: Gigabyte GA-965P-DS3, PentiumD Dual Core Presler 945 3.4Ghz, Gigabyte Geforce 7600GS, 2-1GB Corsair XMS2 800Mhz in Dual Channel, 2-WD 250 SATA 3Gb/s, Onboard Realtek HD 7.1 Audio, DVD ROM, DVD burner, Hiper 580 Watt Power supply, WinXP SP2. |
![]() |
![]() |
![]() |
#6 |
Stowaway
Posts: n/a
Downloads:
Uploads:
|
![]()
does this mod change your home port location to midway too or is it just to let you start from midway but you must still return to the stock home port location for damage repairs or ending mission?
|
![]() |
![]() |
#7 | |
Admiral
![]() Join Date: Jan 2008
Location: New York State, USA
Posts: 2,390
Downloads: 126
Uploads: 7
|
![]() Quote:
Home port is Midway (even the tilted anchor), you can still transfer to another port just like any other port. But just for the sake of time, I used all the missions Objective codes from Pearl, I didn't have time to rewrite missions specifically for Midway. But the missions would probably be about the same anyway, due to the location. Peabody
__________________
System Spec: Gigabyte GA-965P-DS3, PentiumD Dual Core Presler 945 3.4Ghz, Gigabyte Geforce 7600GS, 2-1GB Corsair XMS2 800Mhz in Dual Channel, 2-WD 250 SATA 3Gb/s, Onboard Realtek HD 7.1 Audio, DVD ROM, DVD burner, Hiper 580 Watt Power supply, WinXP SP2. |
|
![]() |
![]() |
![]() |
#8 |
Stowaway
Posts: n/a
Downloads:
Uploads:
|
![]()
great,
![]() |
![]() |
![]() |
#9 |
Lucky Jack
![]() |
![]() |
![]() |
![]() |
![]() |
#10 |
The Old Man
![]() Join Date: Mar 2007
Posts: 1,554
Downloads: 340
Uploads: 0
|
Great work Peabody...
![]() ![]() ![]() |
![]() |
![]() |
![]() |
#11 |
The Old Man
![]() Join Date: Apr 2004
Location: The Shifting, Whispering Sands, NM
Posts: 1,463
Downloads: 10
Uploads: 0
|
But you can't end patrol
|
![]() |
![]() |
![]() |
#12 |
Rear Admiral
![]() |
![]()
I believe TMO starts you at Midway. I always start at Manila, but I think RSRD with TMO will start you back at Pearl, but later it docks you at Midway.
|
![]() |
![]() |
![]() |
#13 |
Silent Hunter
![]() Join Date: Feb 2008
Location: Milan Italy
Posts: 4,999
Downloads: 114
Uploads: 18
|
![]() yeah but then you have to use the super mod, this option allows you to use stock. keltos |
![]() |
![]() |
![]() |
#14 |
Medic
![]() Join Date: Jun 2009
Location: Blue Coral Sea
Posts: 168
Downloads: 305
Uploads: 0
|
![]()
i use the original game and i add the files to the right place.but the start port is pearl harbor. please tell me what something wrong is up?
|
![]() |
![]() |
![]() |
#15 | |
Admiral
![]() Join Date: Jan 2008
Location: New York State, USA
Posts: 2,390
Downloads: 126
Uploads: 7
|
![]() Quote:
After you select "American Career" you will see a screen with date and base. Where you see "Pearl Harbor" click the arrow to the right and a list of bases will show and pick "Midway" Peabody
__________________
System Spec: Gigabyte GA-965P-DS3, PentiumD Dual Core Presler 945 3.4Ghz, Gigabyte Geforce 7600GS, 2-1GB Corsair XMS2 800Mhz in Dual Channel, 2-WD 250 SATA 3Gb/s, Onboard Realtek HD 7.1 Audio, DVD ROM, DVD burner, Hiper 580 Watt Power supply, WinXP SP2. |
|
![]() |
![]() |
![]() |
|
|