Help needed regarding resolution fix

[Fubar2Niner]

Evenin shipmates,

I have just reinstalled sh3 and patched to 1.4b. My problem is I cannot get the res fix working again, using sartori23's batch files and his MS compat app formula for SP2. I know it works as I've used it in the past, not sure if it's something to do with the latest Netframework updates.... I have tried both MS Application Compatibilty 4.1 and 5.0, same result, res won't shift from 1024x768. I must be doing something wrong but it's been sooooooo long since my last fresh install. Even worked fine with GWX. If any of you chaps have some spare time whilst on shore leave I'd love to hear from you.

Specs:
XP Pro + SP2 + all updates.
SH3 up to 1.4b main.cfg changed to 1600x1200
Asus P5N32-E SLI mobo
Intel Core 2 Quad CPU @ 2.66
2xGainward Bliss 8800GTX
Drivers Forceware vs 162.18
2G Corsair TwinX Dominator
DX 9.0c (august 2007 rls)
Samsung Syncmaster 214T LCD (Native res 1600x1200)
3x Seagate Barracuda hdd
Nothing Overclocked


Any and all help much appreciated.
Best regards.

Fubar

[danlisa]

Don't bother with the MSACT program, to much trouble.

Read this thread - http://www.subsim.com/radioroom/showthread.php?t=122646

Look for my posts & link. Instructions follow in the subsequent posts.

Soz, too lazy to repost it all here.

EDIT - Changing the Main.cfg won't do anything. Use the readme in my download.

[Fubar2Niner]

danlisa:

Thanks for the prompt reply, tried this before but retried after another fresh install, what the hey. Alas still fixed at 1024x 768. I don't know what gives. Followed your instructions implicitly. Like I said I've succesfully had this fixed before, never worked using the batch file tho ! Now even the mscompat fails me. Changed the d3d9.cfg as spec'd, but nothing, now I'm trully flumoxed Any ideas ?

FWIW the save screenshot path is not working either so something must be afoot !
Best regards.

Fubar

[danlisa]

Edit - Have you returned the Main.cfg to the default settings?

If you are really having trouble with this, there must be a file conflict somewhere or the MSACT program has actually partially changed something.

If you have dowloaded the files I supplied.....

In the downloaded archive you have:

d3d9.cfg
Readme.txt
SHIII.sdb
SP2 Rez Fix Uninstall.bat
SP2 Rez Fix.bat

Copy ALL of these into the SH3 Program Folder.

1) Run SP2 Rez Fix.bat
2) Then open d3d9.cfg & set the resolution & screenshot path.

If some of these files are already present in your SH3 Program folder, delete them and start fresh.

Just for completeness, remember the rez is only changed when in game, the menu's will not be changed.

BTW, are you a 32 or 64 bit sytem. As it seems some 64bit's have trouble using this bat file.

[Fubar2Niner]

Hi danlisa,

Indeed they are the files downloaded via your link, all were placed in the sh3 dir as instructed. Like I say it is a fresh install ( uninstalled and rem dir etc. before I just grabbed your files ). Run resfix and changed d3d9.cfg as per ins, also made a screenie path, alas no go. Using 32-bit. Is it possible I can post you my .cfg here so you can check all is well, many thanks.

Best regards

Fubar

[danlisa]

Originally Posted by Fubar2Niner

Hi danlisa,

Indeed they are the files downloaded via your link, all were placed in the sh3 dir as instructed. Like I say it is a fresh install ( uninstalled and rem dir etc. before I just grabbed your files ). Run resfix and changed d3d9.cfg as per ins, also made a screenie path, alas no go. Using 32-bit. Is it possible I can post you my .cfg here so you can check all is well, many thanks.

Best regards

Fubar

Sure!

If we can't get to the bottom of it here, I think I can create a working res fix with the MSACT program and then upload them for you. I will explore this option later tonight.

http://www.mysh3.info/shiii/index.ph...lay_Resolution

[Fubar2Niner]

Many thanks danila .cfg as follows:


;
; DX9res Settings
; by Kegetys <kegetys@dnainternet.net>
;
; Note that this config is reloaded on device reset, so you can task switch out
; of the game, change settings from this file and then return
;
[config]
; ResX: Horizontal resolution setting
; ResY: Vertical resolution setting
; useFiltering: Use linear filtering for UI elements
enableScreenshots: Hook printscreen keypress to save TGA screenshot
resX=1600
resY=1200
useFiltering=1
enableScreenshots=1
screenshotPath=C:\Documents and Settings\Mart\Desktop\temp
[gamma]
; setGamma: Override gamma ramp
; gammaRed: Red channel gamma (1.0 = normal, decrease to add brightess, increase to darken)
; gammaGreen: Green channel gamma (1.0 = normal, decrease to add brightess, increase to darken)
; gammaBlue: Blue channel gamma (1.0 = normal, decrease to add brightess, increase to darken)
setGamma=0
gammaRed=1.0
gammaGreen=1.0
gammaBlue=1.0




e.o.f

BTW uninstalled mscompat before i retried this.

Good luck, and many thanks.

Best regards.

Fubar

[danlisa]

It looks correct. There should be a space between the lines screenshotPath & [GAMMA] but that shouldn't make a difference.

Would you be able to post a screengrab of your SH3 Program folder (in list/detailed view), it might help.

Also, have you tried a different rez, maybe 1280 x 1024.

It's very strange. Almost as if the SHIII.sdb is not being written to when you run the Install.bat. BTW, does a cmd box flash up when you run the bat file?

Actually, later, rather than mess with the MSACT program, I can upload the file sets with the fix applied already and should only have to copy & paste. Worth a try and if it doesn't work after that, it must be a file issue on your PC but not related to SH3.

EDIT - Just tried to apply the fix to the files I have here but they won't work without SH3 being present. Will have to wait until I'm home.

[Fubar2Niner]

danila

Can do re the screenie, you want just the parent dir? haven't tried a different rezo but can do. The cmd box does flash up, but it's like lightning fast so I can't se what happens there, have also tried to apply the fix via run>cmd>blah sp2res fix, but it doesn't seem to want to happen that way. Forgot my old dos hehe.

FYI I don't have SH3 installed to my C: but it has never made a difference before.

Best regards

Fubar

[Fubar2Niner]

eeps how do post a screenie ? LOL NM just read the sticky re: screenshots working on it now

Best regards

Fubar

[danlisa]

Originally Posted by Fubar2Niner

eeps how do post a screenie ? LOL

Easiest way is to use this program (ScreenRip)- http://www1.progency.com/other.html

Save it as a JPEG and the visit IMAGESHACK and then paste the image link here. Use the 'Direct link to image' URL found at the bottom of the page after you have uploaded the image.

[Fubar2Niner]

hope that does it

[Fubar2Niner]

Sorry danila,

First attempt was a might fuzzy. Here goes the direct link.

http://img229.imageshack.us/img229/487/sh3dirme7.jpg

Best regards.

Fubar

[danlisa]

Originally Posted by Fubar2Niner

hope that does it

Would do if I could read it.:rotfl:

Bigger & clearer please. If you think it's too big for the forum, just post a URL and I'll open it in another tab.

EDIT - LOL Cross post.

[danlisa]

I can't see the SHIII.sdb file.

It should be around 672 bytes.:hmm: