SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Silent Hunter 3 - 4 - 5 > SH4 Mods Workshop
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 08-16-08, 07:21 PM   #1
Demonizer
Seaman
 
Join Date: Aug 2008
Posts: 39
Downloads: 12
Uploads: 0
Default [WIP]Guns, Guns, Guns

Well i had some fun today and thought about the gun systems onboard submarines. After a few hours playing about in the packages folder i added a few more guns and differnt settings for them. For example turning the single 40mm bofor into a surface only attack. I know its not realstic but i cant seem to get them to engage surface and air targets. So the run down is something like this

3" / 50cal Anti-Aircraft Gun (Can engage surface targets by manual overide by player if located on bow mount of submarine)
Fires a slow rate of fire but does extreme damage to aircraft. Chances of hitting aircraft are slim.
80 Flak Rounds
20 HE Rounds


Single 40mm Bofor - Surface Attack Only
Engages surface vessels only but can be overiden to act as AA gun by player control.
150 AP
250 HE
Twin 40mm Bofor - Air Targets Only
350 HE
250 AP

On other things i added was a set of dual combos. Its now possible to add dual weapon systems like 3" AA guns front and rear, 2x twin 40mm bofors, 40mm singles, other mixture of combos were added. The only problem i found was some of the crew when assigned to the weapon do not appear to mount it but the weapon is still operates. Some have only one crew member operating it, this happens mostly on the stern mount deckgun.

But yeh im gonna setup the renown bits and dates at which this appear etc and then pack it up and upload the files.

Il do two releases one which keeps the weapon systems for the 40mm single to engage air and 3" back to cannon etc.

Stay Tuned

Demon
Demonizer is offline   Reply With Quote
Old 08-16-08, 10:27 PM   #2
Lt commander lare
Grey Wolf
 
Join Date: Feb 2005
Location: southlyon michigan
Posts: 897
Downloads: 781
Uploads: 35
Default

cool sounds fun let us know when its up and running

lt commander lare
Lt commander lare is offline   Reply With Quote
Old 08-17-08, 01:53 AM   #3
keltos01
Silent Hunter
 
Join Date: Feb 2008
Location: Milan Italy
Posts: 4,999
Downloads: 114
Uploads: 18
Default

can you post a screenshot ? please ?

I need help in changing the single mount in my Jyunsen B to a twin mount, can you help ? same goes for the Class T sub actually...

Do you know where to find a 5 inch to replace the deckgun ?

thanks,
keltos
__________________
"Honorable Builder of Sinking Ships"

keltos01 is offline   Reply With Quote
Old 08-17-08, 05:30 PM   #4
Demonizer
Seaman
 
Join Date: Aug 2008
Posts: 39
Downloads: 12
Uploads: 0
Default

Yeh sure, heres a shot with some info on what differnt mountings can be assigned atm.



Im almost finshed in making sure it all works well the 3inch AA gun now fires further at distant air targets and made the flak round work better. I still got a few things to cleanup and im hoping to add differnt sounds to differnt weapons as stated in me other thread abouot adding sounds? Im thinking about changing the Twin 40mm Bofor to fire a flak round is well.

Now about changing what needs to be done to allow differnt weapon systems is kinda tricky and im never good at explaining things well, but here goes.

The files which need to edited are:

\Data\UPCData
Weapons.upc
UpgradePacks.upc

\Library\USSubParts

Quote:
[UpgradePack 33]
ID= UpackCustom1
NameDisplayable= 5inch / 25cal Deck Gun + 4inch / 50cal Deck Gun
FunctionalType= UpFTypeWeaponCannon
UpgradePackSlotType= USDeckGunAdv
Type=NULL
UnitUpgradePackIntervalOptionCurrent= NULL, NULL, 0
UnitUpgradePackIntervalOptions1= 1941-01-01, NULL, 3000
IDLinkUpgradePackElements= 5in25calUS, 3in50calUS
[UpgradePack 33] - Must contine from the last UpgradePack 31,32,33 etc....
ID= UpackCustom1 - Same as above, must not be a copy of something already named.
FunctionalType= UpFTypeWeaponCannon - I am not entirly sure what these does.
UpgradePackSlotType= USDeckGunAdv - Must be USDeckGunAdv for dual weapon systems.
UnitUpgradePackIntervalOptions1= 1941-01-01, NULL, 3000 - The dates at which this becomes available and not available. 3000 = Renown
IDLinkUpgradePackElements= 5in25calUS, 3in50calUS - The weapon systems used. Bow > Stern i think although not sure have to do more testing.

Well im gonna sort this out it seems theres quite a few things i need to do.

Oh yeh someone help me in finding out how to add sounds to the weapons.

Demonz

Last edited by Demonizer; 08-17-08 at 05:48 PM.
Demonizer is offline   Reply With Quote
Old 08-17-08, 08:23 PM   #5
clayp
The Old Man
 
Join Date: Mar 2007
Posts: 1,554
Downloads: 340
Uploads: 0
Demon I built a mod for myself for 1.4 and I cant for the life of me get the twin 40 to show or work..I have changed all of the dates etc on the UPC and CFG and Update files but no luck..When you have a min could you help...No rush...

Looking thru those files and folders I dont see a slot "33" any place..Are you adding this in?
__________________
clayp


Last edited by clayp; 08-17-08 at 08:59 PM.
clayp is offline   Reply With Quote
Old 08-19-08, 03:45 PM   #6
clayp
The Old Man
 
Join Date: Mar 2007
Posts: 1,554
Downloads: 340
Uploads: 0
Default

Well I guess he's not in the helping mode.....
__________________
clayp

clayp is offline   Reply With Quote
Old 08-19-08, 04:12 PM   #7
Demonizer
Seaman
 
Join Date: Aug 2008
Posts: 39
Downloads: 12
Uploads: 0
Default

Err excuse me? I just told you what you need to do to get started. Its not my fault that you dont understand is it. Dont tell me im not helping because i just did, i just explained what needs to be added and changed to get you going, i even explained what some of the values mean. I cant explain much more unless i go into great detail and i doubt your even be able to follow that. You sent me 2 private messages about this before, which were basicly like "GIVE ME THE ANSWER" You didnt even give me chance to explain before another PM came thru, talk about being impatient. So i explained here, and now that you decided to post
Quote:
Well I guess he's not in the helping mode
You really think your going to get any help from me now?

Maybe you should just be patient and wait till i release the mod.
Demonizer is offline   Reply With Quote
Old 08-19-08, 05:17 PM   #8
clayp
The Old Man
 
Join Date: Mar 2007
Posts: 1,554
Downloads: 340
Uploads: 0
Default

Quote:
Originally Posted by Demonizer
Err excuse me? I just told you what you need to do to get started. Its not my fault that you dont understand is it. Dont tell me im not helping because i just did, i just explained what needs to be added and changed to get you going, i even explained what some of the values mean. I cant explain much more unless i go into great detail and i doubt your even be able to follow that. You sent me 2 private messages about this before, which were basicly like "GIVE ME THE ANSWER" You didnt even give me chance to explain before another PM came thru, talk about being impatient. So i explained here, and now that you decided to post
Quote:
Well I guess he's not in the helping mode
You really think your going to get any help from me now?

Maybe you should just be patient and wait till i release the mod.
It didnt show the PM's as going thru on my end!! No where in any of your post does it say to add anything!!!!!!!!!!!

FROM YOUR POST!!!!!
>>>>>>>>>>>>>>>>The files which need to edited are: <<<<<<<<<<<<<<<<<<<
Data\UPCData
Weapons.upc
UpgradePacks.upc

\Library\USSubParts


Quote:
[UpgradePack 33]
ID= UpackCustom1
NameDisplayable= 5inch / 25cal Deck Gun + 4inch / 50cal Deck Gun
FunctionalType= UpFTypeWeaponCannon
UpgradePackSlotType= USDeckGunAdv
Type=NULL
UnitUpgradePackIntervalOptionCurrent= NULL, NULL, 0
UnitUpgradePackIntervalOptions1= 1941-01-01, NULL, 3000
IDLinkUpgradePackElements= 5in25calUS, 3in50calUS

>>>>>[UpgradePack 33] <<<<<<- Must contine from the last UpgradePack >>>>>>31,32,33 etc.... <<<<<<<
ID= UpackCustom1 - Same as above, must not be a copy of something already named.
FunctionalType= UpFTypeWeaponCannon - I am not entirly sure what these does.
UpgradePackSlotType= USDeckGunAdv - Must be USDeckGunAdv for dual weapon systems.
UnitUpgradePackIntervalOptions1= 1941-01-01, NULL, 3000 - The dates at which this becomes available and not available. 3000 = Renown
IDLinkUpgradePackElements= 5in25calUS, 3in50calUS - The weapon systems used. Bow > Stern i think although not sure have to do more testing.

The upgrade packs only go to 29!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.....I'm just not as smart as you and cant read brains yet.......................
__________________
clayp

clayp is offline   Reply With Quote
Old 08-19-08, 07:51 PM   #9
SgtWalt65
Torpedoman
 
Join Date: Apr 2005
Location: Addison, Texas USA
Posts: 117
Downloads: 65
Uploads: 0
Default

Quote:
Originally Posted by Demonizer
Yeh sure, heres a shot with some info on what differnt mountings can be assigned atm.



Im almost finshed in making sure it all works well the 3inch AA gun now fires further at distant air targets and made the flak round work better. I still got a few things to cleanup and im hoping to add differnt sounds to differnt weapons as stated in me other thread abouot adding sounds? Im thinking about changing the Twin 40mm Bofor to fire a flak round is well.

Now about changing what needs to be done to allow differnt weapon systems is kinda tricky and im never good at explaining things well, but here goes.

The files which need to edited are:

\Data\UPCData
Weapons.upc
UpgradePacks.upc

\Library\USSubParts

Quote:
[UpgradePack 33]
ID= UpackCustom1
NameDisplayable= 5inch / 25cal Deck Gun + 4inch / 50cal Deck Gun
FunctionalType= UpFTypeWeaponCannon
UpgradePackSlotType= USDeckGunAdv
Type=NULL
UnitUpgradePackIntervalOptionCurrent= NULL, NULL, 0
UnitUpgradePackIntervalOptions1= 1941-01-01, NULL, 3000
IDLinkUpgradePackElements= 5in25calUS, 3in50calUS
[UpgradePack 33] - Must contine from the last UpgradePack 31,32,33 etc....
ID= UpackCustom1 - Same as above, must not be a copy of something already named.
FunctionalType= UpFTypeWeaponCannon - I am not entirly sure what these does.
UpgradePackSlotType= USDeckGunAdv - Must be USDeckGunAdv for dual weapon systems.
UnitUpgradePackIntervalOptions1= 1941-01-01, NULL, 3000 - The dates at which this becomes available and not available. 3000 = Renown
IDLinkUpgradePackElements= 5in25calUS, 3in50calUS - The weapon systems used. Bow > Stern i think although not sure have to do more testing.

Well im gonna sort this out it seems theres quite a few things i need to do.

Oh yeh someone help me in finding out how to add sounds to the weapons.

Demonz

OMG, the "Uberen Flaggen Shippinz", gutter talk for "Uber Flak Ship"!
I want my 4 x Twin 40mm AA guns yesterday! =)
Increase the rate of fire for each gun. Say to 3500 rpm per mount and tons of ammo and bring on the Jap Naval and Army Air Forces by gawd. Just for the fun factor and giggles of course, not for anything close to realism.
Would be a nice laser light show, just dont forget to turn on your "Pink Floyd" Darkside of the Moon CD.

BTW, Im not flaming your mod. I think its great fun for times when your bored between campaigns and want to play with things.
__________________
Every day is a good day for the other side to die. Your motto is "Be my friend or be a mushroom cloud".

Last edited by SgtWalt65; 08-19-08 at 08:06 PM.
SgtWalt65 is offline   Reply With Quote
Old 08-20-08, 10:42 PM   #10
clayp
The Old Man
 
Join Date: Mar 2007
Posts: 1,554
Downloads: 340
Uploads: 0
Apology

Well Demon I was going to PM you an apology but decided that a public one was better...Now if you accept it or not is up to you... As most around here know I have been very sick for a long time,I know its an excuse but that and the depression attached to it some times I do dumb things.. I can be my own worst enemy.. So I'm apologizing for my actions...
clayp
__________________
clayp

clayp is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.