a mysterious linkage....

Sag75 · 08-02-08, 10:24 PM

Hi all, I noticed a bug..

when I switch Telegraph/Speed-Meter by clicking with the mouse, the manual/automatic targeting button switches in the TDC, too! In other words, when I choose the telegraph, the TDC's button goes on manual; when I choose the speedmeter, the TDC's button goes on automatic targeting!

..the contrary doesn't happen.

I use SH3+GWX2.1 and I play at 98%

....???

badwolf · 08-02-08, 11:58 PM

Quote:

I use SH3+GWX2.1

Hi Sag75

This sounds like a remnant of OLC's GUI. If they are the only mod's used above, then I'm at a loss on how that happened.

You could look at Commands_xx.cfg (xx depending on language, en, de, fr) for:

[Cmd131]
Name=Toggle_TDC_autoupdate
Ctxt=1
MnID=0x3F010017 <--------- This is the ID in menu_1024_768.ini which toggles the TDC. You could try putting a ; in front, or removing this command. Don't forget to have a Back-up.

Or better still, install OLC's gui.

Sag75 · 08-03-08, 11:43 AM

Hi, thank you for your laser-driven anwser

! looking in menu_1024_768 i found these lanes:

[G3F I38]
Name=Toggle Throttle Speed
Type=1032;Button
ItemID=0x3F010017
ParentID=0x3F010000
Pos=4,-106,22,22
(..)

The ItemID has the same value found in Command_en:

[Cmd131]
Name=Toggle_TDC_autoupdate
Ctxt=1
MnID=0x3F010017

So, it's strange. I'll try your suggestion, let see..

thanks,
s

badwolf · 08-03-08, 04:07 PM

Looking at those two statements, then that is definately your problem.

Here's what you should have, taken from SH3 + GWX 2.1:

Your menu_1024_768.ini is O.K, but Commands_en.cfg should be:

[Cmd131]
Name=Toggle_TDC_autoupdate
Ctxt=1

Glad to help.

Sag75 · 08-03-08, 04:15 PM

ok, thank you for helping, so I'll correct my command_en.cfg..

But why this change happened??

badwolf · 08-03-08, 04:31 PM

The only way that it can happen is when mods are applied. The Commands_en.ini is not your original GWX 2.1 install, it was left in.

That is why I keep another data folder as backup, in case of suspected corruption, I delete the data folder and paste in the original, saves reinstall. If your system ctd's it could leave a corrupted data folder.

08-02-08, 10:24 PM	#1
Sag75 XO Join Date: Nov 2007 Location: Canada Posts: 424 Downloads: 45 Uploads: 0	a mysterious linkage.... Hi all, I noticed a bug.. when I switch Telegraph/Speed-Meter by clicking with the mouse, the manual/automatic targeting button switches in the TDC, too! In other words, when I choose the telegraph, the TDC's button goes on manual; when I choose the speedmeter, the TDC's button goes on automatic targeting! ..the contrary doesn't happen. I use SH3+GWX2.1 and I play at 98% ....??? __________________ Betasom - XI Gruppo Sommergibili Atlantici http://www.betasom.it/forum/index.php

08-03-08, 11:43 AM	#3
Sag75 XO Join Date: Nov 2007 Location: Canada Posts: 424 Downloads: 45 Uploads: 0	Hi, thank you for your laser-driven anwser! looking in menu_1024_768 i found these lanes: [G3F I38] Name=Toggle Throttle Speed Type=1032;Button ItemID=0x3F010017 ParentID=0x3F010000 Pos=4,-106,22,22 (..) The ItemID has the same value found in Command_en: [Cmd131] Name=Toggle_TDC_autoupdate Ctxt=1 MnID=0x3F010017 So, it's strange. I'll try your suggestion, let see.. thanks, s __________________ Betasom - XI Gruppo Sommergibili Atlantici http://www.betasom.it/forum/index.php

08-03-08, 04:15 PM	#5
Sag75 XO Join Date: Nov 2007 Location: Canada Posts: 424 Downloads: 45 Uploads: 0	ok, thank you for helping, so I'll correct my command_en.cfg.. But why this change happened?? __________________ Betasom - XI Gruppo Sommergibili Atlantici http://www.betasom.it/forum/index.php

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-03-08, 04:07 PM	#4
badwolf XO Join Date: Jun 2008 Posts: 427 Downloads: 59 Uploads: 0	Looking at those two statements, then that is definately your problem. Here's what you should have, taken from SH3 + GWX 2.1: Your menu_1024_768.ini is O.K, but Commands_en.cfg should be: [Cmd131] Name=Toggle_TDC_autoupdate Ctxt=1 Glad to help.

08-03-08, 04:31 PM	#6
badwolf XO Join Date: Jun 2008 Posts: 427 Downloads: 59 Uploads: 0	The only way that it can happen is when mods are applied. The Commands_en.ini is not your original GWX 2.1 install, it was left in. That is why I keep another data folder as backup, in case of suspected corruption, I delete the data folder and paste in the original, saves reinstall. If your system ctd's it could leave a corrupted data folder.