does the TDC account for the turning of the sub?

Schwuppes · 02-23-08, 07:49 PM

Hi!

Basically if I set up the AOB and speed and then lock on the target can I turn my boat and the AOB will still be correct?

For example:

Lets assume I have a target at bearing 270° (doing 0 knots) with an AOB of 90° starboard.

After entering this information into the TDC can I lock on to the target, turn my sub by 90° to port (so that the target is now at bearing 0°) will the AOB then still be 90°?

Will the TDC take into account that its actually my own sub has turned/moved, and not the target?

cheers!

02-23-08, 07:49 PM	#1
Schwuppes 中国水兵 Join Date: Dec 2007 Location: Perth, Western Australia Posts: 279 Downloads: 22 Uploads: 0	does the TDC account for the turning of the sub? Hi! Basically if I set up the AOB and speed and then lock on the target can I turn my boat and the AOB will still be correct? For example: Lets assume I have a target at bearing 270° (doing 0 knots) with an AOB of 90° starboard. After entering this information into the TDC can I lock on to the target, turn my sub by 90° to port (so that the target is now at bearing 0°) will the AOB then still be 90°? Will the TDC take into account that its actually my own sub has turned/moved, and not the target? cheers! __________________ E8400 @ 4.00Ghz standard vCore, Gigabyte P35C DS3R @ 445 Mhz, Leadtek GTX 280, 3 x 1GB Kingston DDR2 800 @ 890Mhz, 250GB +160GB HDD, Terratec DMX 6fire 24/96, Silverstone ST60F 600W, Logitech Z-5500 THX

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode