Problems with v1.3

Rattail · 07-26-07, 02:19 PM

Yo sailors! I am running v1.3 patch and experience the following problems: 1. I am able to sail submerged forever (from Tokyo to Perth) without running out of fuel, batteries, oxygen or building up carbon dioxide. (I have set all these to realistic in the game setup) 2. no matter what the compression is, my sub sometimes does not budge a millimetre even though the chronometer is spinning like mad. I have to reset waypoints, and start the trip again. 3. regardless of whether I have sustained damage or not, my sub is destroyed (goes into a sprial and the oke on the horn tells me this, and that, and everything else is damaged) if I dive below 30m. What's up? Any ideas please? Maybe I need some mods? My system specs are as follows: AMD 64x2 Dual Core Processor 5600+, 2G RAM, Direct-X9.0c, GeForce 8800GTS 500MB memory. Please advise? is anyone else experiencing the same? Cheers! Rattail

SteamWake · 07-26-07, 02:48 PM

If your talking carrier mode you may want to double check the carrier settings (which are different from the game settings).

There is a radio on the top shelf to the left of your 'desk' while in base. Click that and check.

About the not moving thing. Your ship defaults to all stop when loading a saved game.

SubCaptain62 · 07-26-07, 06:55 PM

Quote:

no matter what the compression is, my sub sometimes does not budge a millimetre even though the chronometer is spinning like mad.

also (this is kind of a duh, but) if you dont have any crew in the engine rooms on the active shift and you order ahead standard then the sub isn't going to move because nobody is working in the engine rooms. (that gets me a lot and i dont notice it)

Bando · 07-26-07, 07:00 PM

How come you don't have a crew there?

SubCaptain62 · 07-26-07, 07:08 PM

I had set them to damage control and forgot about them

tater · 07-26-07, 09:19 PM

You'd also have that problem if you forgot and left battle stations on, or silent running. They'd become exhausted and pass out.

As for the "difficulty" it sounds like a career issue as was suggested, click the radio (?) upper left on bookshelf.

Rattail · 07-27-07, 01:03 AM

Thanks for the replies lads! However, let me add more info:

The scenario could be like this:
I'd be cruising and decide to "warp speed" things along a bit, so I press the compression to 8k+. However, nothing happens. No movement at all. Then I go and slow down the compression again, and then she starts to move. then I up the compression again, and it's ok. ALL DONE IN NAV MODE.

So, it's not a question of having been in battle stations, adjusting speeds, or having crew sleeping or not.

Next time iot happens, I'll make more careful notes of the situation.

cheers till then.....

Lt. Staumeier · 07-27-07, 01:27 AM

Sounds like very wierd issues. I'd suggest a full uninstall and reinstall. Apply patch and start a brand new spanking career. Might help. I've never seen any of the issues you mention (that couldn't be explained by exhausted/missing crew or prior damage to the boat)

Rattail · 07-27-07, 09:17 AM

ok, thanks - I'll try that. I also want to load mods, so I'll do it all at the same time, then restart the career.

cheers mates!

ReallyDedPoet · 07-27-07, 09:20 AM

When using mods, if you are having any problems installing, etc., check out the link below my sig, it is a useful guide

RDP

seaniam81 · 07-27-07, 03:20 PM

after reinstalling give your PC a reboot too. Might help some

Rattail · 07-27-07, 04:45 PM

Thanks for the tip there! That guide is really helpful. However, what do I do to get the mods themselves? I see they are mostly from FileFront but I get an error: "Access denied. Invalid user name or password"

Small files don't give this error.
ANy ideas?

cheers.

07-26-07, 02:19 PM	#1
Rattail Watch Join Date: Jul 2007 Posts: 30 Downloads: 0 Uploads: 0	Problems with v1.3 Yo sailors! I am running v1.3 patch and experience the following problems: 1. I am able to sail submerged forever (from Tokyo to Perth) without running out of fuel, batteries, oxygen or building up carbon dioxide. (I have set all these to realistic in the game setup) 2. no matter what the compression is, my sub sometimes does not budge a millimetre even though the chronometer is spinning like mad. I have to reset waypoints, and start the trip again. 3. regardless of whether I have sustained damage or not, my sub is destroyed (goes into a sprial and the oke on the horn tells me this, and that, and everything else is damaged) if I dive below 30m. What's up? Any ideas please? Maybe I need some mods? My system specs are as follows: AMD 64x2 Dual Core Processor 5600+, 2G RAM, Direct-X9.0c, GeForce 8800GTS 500MB memory. Please advise? is anyone else experiencing the same? Cheers! Rattail

07-26-07, 07:00 PM	#4
Bando Commodore Join Date: May 2007 Location: Where you don't see me Posts: 607 Downloads: 23 Uploads: 0	How come you don't have a crew there? __________________ Regards, Bando

07-27-07, 01:27 AM	#8
Lt. Staumeier Loader Join Date: Jan 2004 Location: Sweden Posts: 85 Downloads: 27 Uploads: 0	Sounds like very wierd issues. I'd suggest a full uninstall and reinstall. Apply patch and start a brand new spanking career. Might help. I've never seen any of the issues you mention (that couldn't be explained by exhausted/missing crew or prior damage to the boat) __________________ "Shoot at everything that moves. If it doesn't move, shoot it anyway, it might move later."

07-27-07, 09:20 AM	#10
ReallyDedPoet Canadian Wolf Join Date: Jul 2006 Location: Canada. The one and only, East Coast Posts: 10,886 Downloads: 946 Uploads: 5	When using mods, if you are having any problems installing, etc., check out the link below my sig, it is a useful guide RDP __________________ Back in the Day

07-27-07, 03:20 PM	#11
seaniam81 Commodore Join Date: Dec 2003 Location: Ontario, Canada Posts: 624 Downloads: 87 Uploads: 0	after reinstalling give your PC a reboot too. Might help some __________________ Ultima ratio regum. (The final argument of kings) - Inscription on french cannons, on order of Louis XIV

07-26-07, 02:48 PM	#2
SteamWake Rear Admiral Join Date: Mar 2005 Posts: 13,224 Downloads: 5 Uploads: 0	If your talking carrier mode you may want to double check the carrier settings (which are different from the game settings). There is a radio on the top shelf to the left of your 'desk' while in base. Click that and check. About the not moving thing. Your ship defaults to all stop when loading a saved game.

07-26-07, 07:08 PM	#5
SubCaptain62 Watch Join Date: Jul 2007 Posts: 15 Downloads: 0 Uploads: 0	I had set them to damage control and forgot about them

07-26-07, 09:19 PM	#6
tater Navy Seal Join Date: Mar 2007 Location: New Mexico, USA Posts: 9,023 Downloads: 8 Uploads: 2	You'd also have that problem if you forgot and left battle stations on, or silent running. They'd become exhausted and pass out. As for the "difficulty" it sounds like a career issue as was suggested, click the radio (?) upper left on bookshelf.

07-27-07, 01:03 AM	#7
Rattail Watch Join Date: Jul 2007 Posts: 30 Downloads: 0 Uploads: 0	Thanks for the replies lads! However, let me add more info: The scenario could be like this: I'd be cruising and decide to "warp speed" things along a bit, so I press the compression to 8k+. However, nothing happens. No movement at all. Then I go and slow down the compression again, and then she starts to move. then I up the compression again, and it's ok. ALL DONE IN NAV MODE. So, it's not a question of having been in battle stations, adjusting speeds, or having crew sleeping or not. Next time iot happens, I'll make more careful notes of the situation. cheers till then.....

07-27-07, 09:17 AM	#9
Rattail Watch Join Date: Jul 2007 Posts: 30 Downloads: 0 Uploads: 0	ok, thanks - I'll try that. I also want to load mods, so I'll do it all at the same time, then restart the career. cheers mates!

07-27-07, 04:45 PM	#12
Rattail Watch Join Date: Jul 2007 Posts: 30 Downloads: 0 Uploads: 0	Thanks for the tip there! That guide is really helpful. However, what do I do to get the mods themselves? I see they are mostly from FileFront but I get an error: "Access denied. Invalid user name or password" Small files don't give this error. ANy ideas? cheers.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode