Thread: Dutch Harbor
View Single Post
Old 08-19-20, 10:25 PM   #2
propbeanie
CTD - it's not just a job
 
propbeanie's Avatar
 
Join Date: May 2016
Location: One hour from Music City USA!
Posts: 9,784
Downloads: 444
Uploads: 2


Default

This is the problem with the game... You come in at 0132 on the 12th, with a 14 day layover in TMO, and you'll depart at 0132 on the 26th - 14 days later... why they don't round-up to say 0600 hours, or 0610 hours or whatever, I dunno...

As to the Alaska start, it's like the New Construction start. There is only the one on June 1, 1942. There are a couple things you could do. The most thorough is to add Dutch Harbor to more starts, Flotilla 4 in the Flotillas.upc file is already built. The PatrolObjectives.cfg is already built. All you have to do is add starts to the CareerStart.upc menu file, and re-number things below. So [CareerStart 3] is set to 06-05-1942, you have a "Flotilla1", 2, 3, 4 & 5 already there, add this:
[CareerStart 3.Flotilla 6]
ID= C3Flotilla6
NameDisplayable= Dutch Harbor, Alaska
IDLinkFlotilla= AlaskaCommand
IDLinkUserPlayerUnits= F4Sboat, 1
FlotillaBriefingText=
FlotillaCommonality= 2
and presto-chango, you have an Alaska start same time frame, but now it's on the main menu, along with Pearl, Fremantle, Brisbane, Midway, and Fremantle Div 2. For each of the Career Starts, all you do is change the CareerStart number, and the Flotilla number as necessary to follow the others, such that say you're going to add to CareerStart 4 for the beginning of 1943, you just change the above to:
[CareerStart 4.Flotilla 6]
ID= C4Flotilla6
NameDisplayable= Dutch Harbor, Alaska
IDLinkFlotilla= AlaskaCommand
IDLinkUserPlayerUnits= F4Sboat, 1, F4Sboat2, 1
FlotillaBriefingText=
FlotillaCommonality= 2
Since there are the same number of "flotillas" as in CareerStart 3, that stays the same, but you bump up the CareerStart number and the ID number "C#"... I forget off the top of my head about when the S-42 come in, but we have them in April of 1942. May or may not be accurate, I do not remember. I do know though, that part of the reason they did not have enough boats up there was because of the S-18 overhauls taking quite a bit longer than expected, and then quite a few of them broke down on the way up, or maybe on their first patrols, and some went right back where they came from (mostly San Diego). In FotRSU, we took a few of the missions and altered the weather variables, and we still get too much clear, smooth, sunshiney days up there, so we'll have to roughen things up a pinch more... lol

You can also change the end date for Dutch Harbor in the Flotillas.upc, to extend the S-Boats' stay until December of 1943 when the last patrol went out from there (the 15th??). You could also change the boats' 'definition' and have them transfer somewhere when they fun is over there. Don't forget to do your "housekeeping" down below for CareerStart 9 for the old Alaska start. You do lose that nice picture, but we added it to a new Spring of 1942 start in FotRSU, combining it with the Brisbane kick-off of April 15, 1942. If you delete that Alaska start, you will have re-number the New Construction starts below... don't forget the ID numbering on those!

Now, TMO only has 10 PatrolObjectives files for the area, set with only 2 ObjectiveCode= in the Flotillas.upc to co-incide with the 2 AllMatch= in PatrolObjectives for their assignment. I don't think lurker added any with RSRDC. Look in the FotRSU12, and see what you like, but you'll then have to add to the Flotillas.upc for mission calls, and to the PatrolObjectives.cfg for the actual assignments. Add to the DynamicMiss.cfg if you want to have them assigned by a "Status Report". Just watch the ID and Section numbering there... Good luck, have fun, ask away with any questions!
__________________

"...and bollocks to the naysayer/s" - Jimbuna

Last edited by propbeanie; 08-19-20 at 10:35 PM.
propbeanie is offline   Reply With Quote