Quote:
Originally Posted by keltos01
go to your sub's directory, open XXX.cfg with notepad, you should see something like this :
[Unit]
ClassName=SSJyunsen_B
3DModelFileName=data/Submarine/NSS_Jyunsen_B/NSS_Jyunsen_B
HumanPlayable=YES
Interior=data/Interior/NSS_Uboat21/NSS_Uboat21
UnitType=200
MaxSpeed=23.5
MaxSpeedSubmerged=8
Length=108.5
Width=9.1
RenownAwarded=450
[Salvo]
1=1,3,5,2,4,6
2=1,2,4,6
3=1,3,5,6
4=1,3,5
5=2,4,6
6=1,4
7=2,3
8=5,6
[Properties]
PeriscopeDepth=15.5;meters
SnorkelDepth=15;meters
CrashDepth=30;meters
MaxDepth=150;meters <--- changed from 100 originally
SurfaceDepth=10;meters
TorpLaunchMaxDepth=50;meters
StormConditions=9,0.1;max wind speed [m/s], max rain intensity [0,1]
[EngineProperties]
AllStop=0.00
AheadSlow=0.40
AheadOneThird=0.57
AheadStandard=0.80
AheadFull=0.94
AheadFlank=1.00
BackSlow=-0.26
BackStandard=-0.40
BackFull=-0.53
BackEmergency=-0.66
I changed the max depth so as to be able to go deeper. The test depth for the Jyunsen B is 100 m, but it's a safety margin, some I boat captains were comfortable with going down to 1.5 times that depth (read it someplace), so I set my max depth to 150 m or 450 feet.
hope that helps,
Keltos
ps the crush depth is randomly selected with the max depth as a factor : max depth x bad luck X dammaged or not boat or something  |
I dont think so...The green depth is just for GUI's depth gauge critical depth mark, red line or something. In order to edit submarine crush depth you have to edit sub's .zon file using Goblin or S3d editor...
EDIT:Just saw the date of posting...
Quote:
Originally Posted by Senf-Man82
How can I increase the diving speed? It occurs way to slow to me in contrast to the orginal german boats  |
Hm, start German campaign?
Seriously, during the WWII german U-boats had much shorter diving times than american counterparts ...
To edit diving times and rates you have to edit ballast tanks values in submarine .sim file...