Boris
 

Please post the edited files. i have tried to impliment these mods but I keep getting the silley ID not found message
irish1958

Re: Boris
 

They are posted and they don't alter the IDs. There is something you missed out. Missing IDs either means you skiped a sequence or you sticked two sequences togheter. There's something wrong you did.

Check the instructions again...

Or try to note which IDs missing and post it.

Ok, for all that are interested here are the edited files from my installation:

http://rapidshare.de/files/17541889/...files.rar.html

You MUST have

Jonz rec manual
Grey Wolves (or navimap and dragable chronometer)
6 Dials Simfeeling
6 Dials TDC update

if you use any more or any less of these mods, it won't work

Hey JonZ,

I've got a problem with the IuB version of JIRM.

I have already done the following:

SH3 Cmdr rolled back, all mods removed correctly (via JSGME). Mods now reinstalled (via JSGME) in this order IuB 1.03, Iub 1.03 1.1 Patch and 16km fix. Loaded (w/o SH3 Cmdr) and all works fine. Now I install (again through JSGME) JIRM - IuB 1.03, load again w/o SH3Cmdr and I get this:

http://www.hitchcockmodels.com/Subs/JIRM_IuB103c.jpg

Which look right, but when I open the RM I get this:

http://www.hitchcockmodels.com/Subs/JIRM_IuB103a.jpg

http://www.hitchcockmodels.com/Subs/JIRM_IuB103b.jpg

Any ideas?

Thanks for a great new mod!

Hitch

Yep, found the culprit. It look for an older image. The bug never occured on my tests because I had this image in the directory :shifty:

Fix is uploaded

JonZ

Ha! I was right in the middle of writing you to tell you I'd found the problem as well! :rotfl: :rotfl: :rotfl: :rotfl:

Thanks for the update!

Hitch

The version I uploaded is with the German fix if you're interested :|\

JonZ

JonZ,

I'm not seeing any difference. The "culprit" I found earlier was that the menu_1024_768.ini contain references to two files which are not included:

recmancover2.tga and RecManBkgr2.tga.

Hope this helps!

Hitch

The entries in the menu.ini and both tgas are not part of Jon's mod.
So you did something wrong.

You mean these entries in the menu_1024_768.ini?

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; JonZ Large Recognition Manual ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

[G25 I4]
Name=Next
Type=1032;Button
ItemID=0x25050004
ParentID=0x25050000
Pos=309,-162,83,36
Color=0xFFFFFFFF
Materials=4
Display=2;Linear
Mat 0=data/menu/gui/recmanual/icons.tga
Crop 0=0.9375,0,0.0625,0.015625
Mat 1=data/menu/gui/recmanual/icons.tga
Crop 1=0.9375,0,0.0625,0.015625
Mat 2=data/menu/gui/recmanual/icons.tga
Crop 2=0.9375,0,0.0625,0.015625
Mat 3=data/menu/gui/recmanual/recmancover2.tga
Crop 3=0.8671875,0,0.0810546875,0.0703125
MatFlags=0x1
TexFmt=0x9
StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF

[G25 I5]
Name=Previous
Type=1032;Button
ItemID=0x25050003
ParentID=0x25050000
Pos=226,-162,83,36
Color=0xFFFFFFFF
Materials=4
Display=2;Linear
Mat 0=data/menu/gui/recmanual/icons.tga
Crop 0=0.9375,0,0.0625,0.015625
Mat 1=data/menu/gui/recmanual/icons.tga
Crop 1=0.9375,0,0.0625,0.015625
Mat 2=data/menu/gui/recmanual/icons.tga
Crop 2=0.9375,0,0.0625,0.015625
Mat 3=data/menu/gui/recmanual/recmancover2.tga
Crop 3=0.7861328125,0,0.0810546875,0.0703125
MatFlags=0x1
TexFmt=0x9
StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF

[G25 I6]
Name=Close
Type=1032;Button
ItemID=0x25050005
ParentID=0x25050000
Pos=528,0,48,43
Color=0xFFFFFFFF
Materials=4
Display=2;Linear
Mat 0=data/menu/gui/recmanual/icons.tga
Crop 0=0.9375,0,0.0625,0.015625
Mat 1=data/menu/gui/recmanual/icons.tga
Crop 1=0.9375,0,0.0625,0.015625
Mat 2=data/menu/gui/recmanual/icons.tga
Crop 2=0.9375,0,0.0625,0.015625
Mat 3=data/menu/gui/recmanual/RecManCover2.tga
Crop 3=0.953125,0,0.046875,0.083984375
MatFlags=0x1
TexFmt=0x9
StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF

[G25 I44]
Name=Bkgr
Type=1031;Stat bmp array
ItemID=0x25060001
ParentID=0x25060000
Pos=0,0,576,356
Materials=1
Display=0;Linear
Mat0=data/menu/gui/recmanual/RecManBkgr2.tga
Crop 0=0,0,0.5625,0.6953125
MatFlags=0x1
TexFmt=0x9
Drag=false
BmpState=1
NeedFocus=true
SelOne=true
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF
[color=red]

those entries was to be replace to RecManual.tga.

That what you said you did.

Probably an mistake in the readme of one of the install packages.
Which one did you use?

This is the same part out of the complete kit download readme:

[G25 I4]
Name=Next
Type=1032;Button
ItemID=0x25050004
ParentID=0x25050000
Pos=309,-162,83,36
Color=0xFFFFFFFF
Materials=4
Display=2;Linear
Mat 0=data/menu/gui/recmanual/icons.tga
Crop 0=0.9375,0,0.0625,0.015625
Mat 1=data/menu/gui/recmanual/icons.tga
Crop 1=0.9375,0,0.0625,0.015625
Mat 2=data/menu/gui/recmanual/icons.tga
Crop 2=0.9375,0,0.0625,0.015625
Mat 3=data/menu/gui/recmanual/RecManual.tga
Crop 3=0.04052734375,0.8125,0.04052734375,0.0703125
MatFlags=0x1
TexFmt=0x9
StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF

[G25 I5]
Name=Previous
Type=1032;Button
ItemID=0x25050003
ParentID=0x25050000
Pos=226,-162,83,36
Color=0xFFFFFFFF
Materials=4
Display=2;Linear
Mat 0=data/menu/gui/recmanual/icons.tga
Crop 0=0.9375,0,0.0625,0.015625
Mat 1=data/menu/gui/recmanual/icons.tga
Crop 1=0.9375,0,0.0625,0.015625
Mat 2=data/menu/gui/recmanual/icons.tga
Crop 2=0.9375,0,0.0625,0.015625
Mat 3=data/menu/gui/recmanual/RecManual.tga
Crop 3=0,0.8125,0.04052734375,0.0703125
MatFlags=0x1
TexFmt=0x9
StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF

[G25 I6]
Name=Close
Type=1032;Button
ItemID=0x25050005
ParentID=0x25050000
Pos=528,0,48,43
Color=0xFFFFFFFF
Materials=4
Display=2;Linear
Mat 0=data/menu/gui/recmanual/icons.tga
Crop 0=0.9375,0,0.0625,0.015625
Mat 1=data/menu/gui/recmanual/icons.tga
Crop 1=0.9375,0,0.0625,0.015625
Mat 2=data/menu/gui/recmanual/icons.tga
Crop 2=0.9375,0,0.0625,0.015625
Mat 3=data/menu/gui/recmanual/RecManual.tga
Crop 3=0,0.712890625,0.0234375,0.083984375
MatFlags=0x1
TexFmt=0x9
StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF

[G25 I44]
Name=Bkgr
Type=1031;Stat bmp array
ItemID=0x25060001
ParentID=0x25060000
Pos=0,0,576,356
Materials=1
Display=0;Linear
Mat 0=data/menu/gui/recmanual/RecManual.tga
;Crop 0=0.642578125,0,0.28125,0.6953125; Low Contrast Pages
Crop 0=0.3544921875,0,0.28125,0.6953125; High Contrast Pages
MatFlags=0x1
TexFmt=0x9
Drag=false
BmpState=1
NeedFocus=true
SelOne=true
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

Aduke, you are correct. Hick had a problem with a IuB version which was wrong and I reuploaded right after he noticed it. There's should be no more problem for IuB users now.

I'll give it a fresh start.

Hitch

JonZ,

Could you check your latest JIRM IuB version's "menu_1024_768.ini"

It appears to have two full sets of G25 entires. The first set contains the RecManCover2.tga and RecManBkgr2.tga entries, and the next appears normal. Could this be the problem?

Hitch

Well, I was downloading it at the library, but I grabbed the new SHIII Commander first, and ran out of time 88% of the way through the RM download. :damn:

Next week, for sure.

Yes, that's what I've tried to explain. When you first alerted about the problem, I investigated the IuB pack and found it wasn't the good ini version. So I immediately replaced by the correct one.

It now should be one file RecManual.tga with new coordinates.

Just done it JONZ if you whant to check it out! :up:


http://www.subsim.com/phpBB/viewtopic.php?t=51051

JonZ,
I understand that. Just to be SURE just I re-dloaded and installed the UPDATED file and the "menu_1024_768.ini" still contains two sets of the G25 entries and the problem still exists. This is also on a fresh SH3 install (what the heck :D )

Hitch

You... You are right :doh:

Geez that file is cursed or something. I really appologise for this.

Reuploading a good version.

heh, you're unlucky with my IuB files, it like, what, the third time? :-j

JonZ