Turn off crew fatigue [Archive] - SUBSIM Radio Room Forums

ratatoeskr76

08-07-15, 11:46 AM

Ahoi Kaleuns, :salute:

I just got my gwx-Installation running again with widescreen. I runs stable, it looks gorgeous, I love it!

But alas, now I want to turn off fatigue and dont find a way in gmx.

Searching the forums I found out that I can turn it off via sh3 commander. But then I find threads saying that it is tricky to install sh3-commander with gwx and you have to move some files here and there. Reading all these threads I fear I will ruin mmy precioussss installation if i try this making an error in the process.

In another thread they say you can edit basic.cfg. I found the file and the section and here comes my question:

Is changing FatigueMax=0.5 to a high number the right way to turn off fatigue?

Good hunting
Ratatoeskr

rowi58

08-07-15, 12:07 PM

Hi,

if you know where to go - Basic.cfg - just replace the existing fatigue model with this one:

[FATIGUE_COEF]
;comp 0
RegularFactor00=0
SpecificFactor00=0
BadWeather0=0
;comp1
RegularFactor10=0
RegularFactor11=0
SpecificFactor10=0
SpecificFactor11=0
BadWeather1=0
;comp2
RegularFactor20=0
RegularFactor21=0
SpecificFactor20=0
SpecificFactor21=0
BadWeather2=0
;comp3
RegularFactor30=0
RegularFactor31=0
SpecificFactor30=0
SpecificFactor31=0
BadWeather3=0
;comp4
RegularFactor40=0
RegularFactor41=0
SpecificFactor40=0
SpecificFactor41=0
BadWeather4=0
;comp5
RegularFactor50=0
RegularFactor51=0
SpecificFactor50=0
SpecificFactor51=0
BadWeather5=0
;comp6
SpecificFactor60=-0.1
SpecificFactor61=-0.1
;comp7
SpecificFactor70=-0.1
SpecificFactor71=-0.1
;comp8
RegularFactor80=0
RegularFactor81=0
SpecificFactor80=0
SpecificFactor81=0
BadWeather8=0
;comp9
RegularFactor90=0
SpecificFactor90=0
BadWeather9=0
;comp10
RegularFactor100=0
SpecificFactor100=0
BadWeather10=0
;comp 11
RegularFactor110=0
RegularFactor111=0
SpecificFactor110=0
SpecificFactor111=0
BadWeather11=0

Thats the way we are using it - an SH3_Cmdr too.

Greetings
rowi58

Sailor Steve

08-07-15, 12:21 PM

It looks like Rowi58 has the information you need, but I wanted to address one thing.

But then I find threads saying that it is tricky to install sh3-commander with gwx and you have to move some files here and there. Reading all these threads I fear I will ruin mmy precioussss installation if i try this making an error in the process.

Every now and then I read somebody saying this, and I don't know why. SH3 Commander needs one extra file to make it work properly with GWX. You can find that here (http://www.subsim.com/radioroom/downloads.php?do=file&id=1421). I've been using the two together for years, and so have a lot of other people. If you're not using SH3 Commander you're missing one of the best parts of the game. :sunny:

fitzcarraldo

08-07-15, 12:28 PM

It looks like Rowi58 has the information you need, but I wanted to address one thing.

Every now and then I read somebody saying this, and I don't know why. SH3 Commander needs one extra file to make it work properly with GWX. You can find that here (http://www.subsim.com/radioroom/downloads.php?do=file&id=1421). I've been using the two together for years, and so have a lot of other people. If you're not using SH3 Commander you're missing one of the best parts of the game. :sunny:

Pure true. Use Commander with the GWX Commander cfg. and turn off fatigue.

Regards.

Fitzcarraldo :salute:

ratatoeskr76

08-07-15, 02:07 PM

... I will use the file Steve pointed out to install the commander!
Kind regards
Ratatoeskr

BigWalleye

08-07-15, 02:10 PM

Every now and then I read somebody saying this, and I don't know why.

Who exactly posts that stuff? Because it is not only patently untrue, but also a disservice to the entire SubSim community. That kind of desinformatsia should be discouraged.

There is a simple batch file, created by VikingGrandad, which does the file exchange for you. Just download, unzip, and run. Nothing to mess with or mess up. Easy and reliable. What's to fear? Download it here: http://www.subsim.com/radioroom/downloads.php?do=file&id=1421

ratatoeskr76

08-09-15, 11:34 AM

I am sorry - didn't want to spread such rumour. In fact my problems with my sh3-gwx installation had their root in a win8 / gpu driver issue. And after spending many hours troubleshooting you are quite reluctant changing anything if you are not really sure you dont break anything.

Installing the commander with the auxilliary file you pointed me to worked perfectly and gwx runs without problems.

best regards
Ratatoeksr

Sailor Steve

08-09-15, 12:06 PM

I am sorry - didn't want to spread such rumour.
No need to apologize. You didn't spread it, you just heard it and asked about it. It's all good. :sunny:

HW3

08-09-15, 12:33 PM

You did nothing wrong Ratatoeksr, you had a question, they answered, and you are up and running. All is good. :up:

Herr Eeguy

11-17-19, 02:34 PM

Hi,

if you know where to go - Basic.cfg - just replace the existing fatigue model with this one:

[FATIGUE_COEF]
;comp 0
RegularFactor00=0
SpecificFactor00=0
BadWeather0=0
;comp1
RegularFactor10=0
RegularFactor11=0
SpecificFactor10=0
SpecificFactor11=0
BadWeather1=0
;comp2
RegularFactor20=0
RegularFactor21=0
SpecificFactor20=0
SpecificFactor21=0
BadWeather2=0
;comp3
RegularFactor30=0
RegularFactor31=0
SpecificFactor30=0
SpecificFactor31=0
BadWeather3=0
;comp4
RegularFactor40=0
RegularFactor41=0
SpecificFactor40=0
SpecificFactor41=0
BadWeather4=0
;comp5
RegularFactor50=0
RegularFactor51=0
SpecificFactor50=0
SpecificFactor51=0
BadWeather5=0
;comp6
SpecificFactor60=-0.1
SpecificFactor61=-0.1
;comp7
SpecificFactor70=-0.1
SpecificFactor71=-0.1
;comp8
RegularFactor80=0
RegularFactor81=0
SpecificFactor80=0
SpecificFactor81=0
BadWeather8=0
;comp9
RegularFactor90=0
SpecificFactor90=0
BadWeather9=0
;comp10
RegularFactor100=0
SpecificFactor100=0
BadWeather10=0
;comp 11
RegularFactor110=0
RegularFactor111=0
SpecificFactor110=0
SpecificFactor111=0
BadWeather11=0

Thats the way we are using it - an SH3_Cmdr too.

Greetings
rowi58

I was tired of babysitting the crew and tucking them in bed. Most of the time all my officers needed bed time (red exclamation) but not any more. What a time saver!! Thank you :Kaleun_Salute:

David I

11-18-19, 10:26 AM

Steve,

Are you running Windows 7? There have definitely been problems with SH3 Cmdr/CWX/Windows 7. I know. I have them.

Of the solutions offered in other threads, this computer dolt could only understand or successfully implement the "don't use SH3 Cmdr" one.

I really miss SH3 Cmdr! A lot!

David I

Anvar1061

11-18-19, 12:15 PM

David I, You whine in all topics, instead of carefully reading the recommendations. This is no longer a problem. SH3 Commander works as it should in Win7.

David I

11-18-19, 05:35 PM

Anvar,

Whine? On all Topics? I must be far busier on this site than I knew.

The slings and arrows......Oh, you cut me to the bone.

OK. I'll give it another shot.

Order goes:

SH3
4 gig patch
Sub Cmdr 3.2
Sub Cmdr 3.2 patch for GWX
JSME
GWX

And that's it, yes?

No more, "Sub Cmdr is running....", Rundle.dll (wtf is that anyway?), no more having to change register permissions, etc.?

Joy!

David I

Anvar1061

11-19-19, 04:35 AM

Anvar,

Whine? On all Topics? I must be far busier on this site than I knew.

The slings and arrows......Oh, you cut me to the bone.

OK. I'll give it another shot.

Order goes:

SH3
4 gig patch
Sub Cmdr 3.2
Sub Cmdr 3.2 patch for GWX
JSME
GWX

And that's it, yes?

No more, "Sub Cmdr is running....", Rundle.dll (wtf is that anyway?), no more having to change register permissions, etc.?

Joy!

David I
Plumber 1,

Starting last week I began having the same problem. Are you running Windows 7? I'm beginning to think that with Microsoft ending support for Windows 7 that something didn't get updated anymore that allowed SH3 Commander to operate normally. I've been running GWX/SH3 Commander for years without any problem.

I tried re-installation of GWX & SH3C but ran into the same problem.

Anyway I'm glad you found a work around. At least I can still play.

David I
https://www.subsim.com/radioroom/images/smilies/Kaleun_Wink.gif
https://www.subsim.com/radioroom/showpost.php?p=2615477&postcount=15

THEBERBSTER

11-19-19, 05:58 AM

Fatigue can be changed in SH3 Commander's Game Play Settings there is no need to start altering files.
Peter

Anvar1061

11-19-19, 06:09 AM

David I

11-19-19, 10:12 AM

Anvar,

Like I said, I tried all the solutions. I tried changing the gameux.dll to something else but my computer refuses to let me rename that file. Neither left clicking nor right clicking it would allow me to change it.
When I tried just erasing the .dill by backspacing my computer smugly informed me that I can't do that.

Really frustrating, I can tell you.

David I

Anvar1061

11-19-19, 11:17 AM

Really frustrating, I can tell you.
I also.
https://www.subsim.com/radioroom/images/smilies/Kaleun_Confused.gif
You must do this with Administrator rights.

David I

11-19-19, 03:05 PM

Anvar,

When I say I am a Computer "Old Duffer" or "No Nothing", I'm not kidding.

To paraphrase Gollum, "What's Administrator Rights Precious?" I've never dealt with them before so I really don't even know where to start. So when you generously offer me a solution "that can be done in two clicks of the mouse" and my first click has the computer telling me I can't do that, I am at a dead end.

That's why I have, to date, pursued those paths I do know how to do because someone else has provided a "go to x, do y" and Bob's your Uncle the fatigue (or whatever) has gone away.

I'm not whining, I'm merely computer retarded, and I bet I'm not alone, in a minority sure, but not alone.

David I

Anvar1061

11-20-19, 01:13 AM

I sincerely sympathize with you and try to help. Can you ask for help from a friend or ask for help through remote access?

johnboy1958

06-01-22, 03:35 AM

Hi,

if you know where to go - Basic.cfg - just replace the existing fatigue model with this one:

[FATIGUE_COEF]
;comp 0
RegularFactor00=0
SpecificFactor00=0
BadWeather0=0
;comp1
RegularFactor10=0
RegularFactor11=0
SpecificFactor10=0
SpecificFactor11=0
BadWeather1=0
;comp2
RegularFactor20=0
RegularFactor21=0
SpecificFactor20=0
SpecificFactor21=0
BadWeather2=0
;comp3
RegularFactor30=0
RegularFactor31=0
SpecificFactor30=0
SpecificFactor31=0
BadWeather3=0
;comp4
RegularFactor40=0
RegularFactor41=0
SpecificFactor40=0
SpecificFactor41=0
BadWeather4=0
;comp5
RegularFactor50=0
RegularFactor51=0
SpecificFactor50=0
SpecificFactor51=0
BadWeather5=0
;comp6
SpecificFactor60=-0.1
SpecificFactor61=-0.1
;comp7
SpecificFactor70=-0.1
SpecificFactor71=-0.1
;comp8
RegularFactor80=0
RegularFactor81=0
SpecificFactor80=0
SpecificFactor81=0
BadWeather8=0
;comp9
RegularFactor90=0
SpecificFactor90=0
BadWeather9=0
;comp10
RegularFactor100=0
SpecificFactor100=0
BadWeather10=0
;comp 11
RegularFactor110=0
RegularFactor111=0
SpecificFactor110=0
SpecificFactor111=0
BadWeather11=0

Thats the way we are using it - an SH3_Cmdr too.

Greetings
rowi58

:Kaleun_Cheers: Rowi58. Took me a while to find the right piece of commander files, but up and running now:Kaleun_Salute:
Alls well that ends well :Kaleun_Applaud:

Anvar1061

06-01-22, 05:34 AM

:Kaleun_Cheers: Rowi58. Took me a while to find the right piece of commander files, but up and running now:Kaleun_Salute:
Alls well that ends well :Kaleun_Applaud:

RIP rowi58
https://www.subsim.com/radioroom/images/smilies/Kaleun_Salute-1.gif