Low FPS~ Mod Soup?

[Krauter]

I seem to be experiencing low FPS rating in the Sub Pen as well as in harbors. Also, loading times (from Main Menu into game is extremely long.. anyone else having these problems?)

*Edit* Actually, my FPS inside the sub is alot better than what it used to be. Kudos to SteelViking and his Mod for that

Here is a list of my Mods:

A Fistful of Emblems v1.51
A Fistful of Emblems v1.51 (Weathered)
Accurate German Flags
Capthelms SH5 Audio Mod
Church's SHV 1.01 Keyboard Commands v1.1
Enhanced FunelSmoke_by HanSolo78
Icebergs v1.3 - Vikingers Lite Campaign Compatible
ImprovedWaves_Improved roll&pitch V1.1
Manual Targeting Training Missions
MightyFine Crew Mod 1.2.1 Alt w beards
MCCD_1.04_MFCM_1.2.1_compatible
No 1-2-3 Torpedo Alignment
No Damn Bubbles, No Damn Halo Mod
RemoveLogoIntroTheDarkWraith
Wordeees' Actual Footage Menu
Uboat visual damage 1.0 - wamphyri
Loading Screens Mod
MightyFine Less Annoying Footsteps 1.0
SD_NewMapColors
SD_MapCourseLine_no_arrows
Environment 3.0 MOD
Environment 3.1 MOD
SteelViking's Interior Mod V1.0
sobers base wave mechanics for SH5 v3
sobers talking conning crew mod
Floor Black
Interior working dials v1_21
McHub532s Pictures for Krauters Submarine SH5
WoGaDi Mod BetaSix
SV&Com Underwater Mod
Shadow Improvement Mod
AilClouds 3.0
AilSmoke 1.7
Damage assessment
IRAI_0_0_14_ByTheDarkWraith
U-boat Historical Specifications 1.4
Seawolf gunsub Beta
SeaWolf torpedo tweak
NewUIs_TDC_3_9_2_ByTheDarkWraith
NewUIs_TDC_3_9_2_AltAdvSpeedGraphics_by_naights
NewUIs_TDC_3_9_2_ColoredShippingChart_by_reaper7
MRP 1.3 light
MRP 8x5 patch
Free Cam Tweak 1.1 - Narrow
BRF 1.3 full
BRF 1.1 HP balance
Old Style Explosions V1.1
Reboot's Hot Soup 1.0
Enhanced Ship Recon Manual V2.10

Also, is the order in which I've installed correct? or is there anything I should delete, or rearrange?

[TheDarkWraith]

my UIs mod will cause your loading time to go up. It has much to do before the game starts :D

[Krauter]

Ahh ok thank you :)

[THE_MASK]

What have you got your shadows setting on in SH5 graphics options ? Put it on half or lower , it makes a big diffrence . You can change it on the fly , you dont need to restart to see the changes in game .

[SteelViking]

Also Krauter, you might try the low resource usage version of my shadow improvement mod. unless you have a top of the line computer, the higher resource version tends to lower FPS to at least some degree. I am currently experimenting with a setup for the shadow mod that will give full quality shadows without the FPS drop, so lets pray it pans out.

[Webster]

you list environment 3.0 AND environment 3.1 :06:

you are only supposed to be using one OR the other but not both IMO

they should just be simply overwritting each other but it could cause issues :yep:

the same thing with "A Fistful of Emblems" and the "BRF" mods, i dont think your supposed to use more then one version at a time there but i could be wrong

[SteelViking]

you list environment 3.0 AND environment 3.1 :06:

you are only supposed to be using one OR the other but not both IMO

they should just be simply overwritting each other but it could cause issues :yep:

the same thing with "A Fistful of Emblems" and the "BRF" mods, i dont think your supposed to use more then one version at a time there but i could be wrong

I believe that "A Fistful of Emblems" which is just for sub emblems is totally different from "BRF" which is for more realistic flotation/sinking of ships. I have honestly never used A Fistful of Emblems though....

And, Env 3.1 should be installed in JSGME over top of Env 3.0. As I have stated on the thread for Env, I would be willing to put together a combined Env3.1 like I have done for past versions if people would prefer it that way. I am not sure why W_clear does not like to make whole releases in the first place.

[Tectronus]

Also i saw a tip somewhere for people to try d3d_antilag for shv. I notice this while working well for ingame, totally added a extreme load time from start menu to full run.

Don't know if your using that though.

[Krauter]

In response, I think I am using shadows at max.. I will try it lowered though

Webster, the reason why I have two "A fistfull of Emblems" is one is the default Mod, and the second adds weathered textures to some of the default emblems (you need the default one for the weathered textures) Also, Steel, A fistfull of Emblems is a handy Mod. Not gamechanging, but adds a ton of new sub emblems for your submarine.

For BRF I assumed that you needed the HP Tweak overtop the regular BRF.

Finally, as Steel mentioned you need to have 3.1 over 3.0 (and yes Steel I'd love it if you could make a one file install).

Also, I am not using the d3d anti lag.. what is this :S ?

[SteelViking]

In response, I think I am using shadows at max.. I will try it lowered though

Webster, the reason why I have two "A fistfull of Emblems" is one is the default Mod, and the second adds weathered textures to some of the default emblems (you need the default one for the weathered textures) Also, Steel, A fistfull of Emblems is a handy Mod. Not gamechanging, but adds a ton of new sub emblems for your submarine.

For BRF I assumed that you needed the HP Tweak overtop the regular BRF.

Finally, as Steel mentioned you need to have 3.1 over 3.0 (and yes Steel I'd love it if you could make a one file install).

Also, I am not using the d3d anti lag.. what is this :S ?

Alraight, I will have a combined 3.1 posted on the Env thread in a few minutes.:salute:

[Krauter]

You da man :salute:

[SteelViking]

You da man :salute:

No problem. Combined Env3.1 is now available on the Env thread.:salute:

[Webster]

And, Env 3.1 should be installed in JSGME over top of Env 3.0. ....

I am not sure why W_clear does not like to make whole releases in the first place.

ok, i didnt notice that. i was using 3.1 by itself and had removed 3.0

IMO if its not a complete mod then it should be called a patch or ad-on for the original mod, that avoids confusion and missunderstandings

and just to be clear, am i supposed to add all of the env mod versions together going back to the first one? :06:

[SteelViking]

ok, i didnt notice that. i was using 3.1 by itself and had removed 3.0

IMO if its not a complete mod then it should be called a patch or ad-on for the original mod, that avoids confusion and missunderstandings

and just to be clear, am i supposed to add all of the env mod versions together going back to the first one? :06:

I totally agree about that naming convention(actually I prefer whole packages and to not mess with patches/add-ons unless it is absolutely necessary).

No, you only need to install 3.0 and then install 3.1(in JSGME of course). Or, I have made it even simpler, because I have posted a link to a combined Env3.1 on the thread for the Env mod. If you download that and extract it to your mods folder, that is all you will have to install. Hope this helps.:salute:

[Krauter]

ok, i didnt notice that. i was using 3.1 by itself and had removed 3.0

IMO if its not a complete mod then it should be called a patch or ad-on for the original mod, that avoids confusion and missunderstandings

and just to be clear, am i supposed to add all of the env mod versions together going back to the first one? :06:

I agree with this logic (on overall Mod and not numerous smaller patches) for the exact reasons you've shown. You're always unsure if you're up to date or have the correct files. This is why I never used this Mod until 2.5 came out (the 1 time package Kylania put together).

Anyways thanks for the help guys

[Frantic8882]

Thanks from me too. Now I know why my weathered emblems would´t show.:D

[Badger Finn]

Also, I am not using the d3d anti lag.. what is this :S ?

Bit late ...

I scored the d3d anti lag from one of the SH5 posts dont remember which one and thought I would give it go in SH3 and had excellent result!

Clipping or graphic stagger in heavy smoke etc have pretty much been eliminated Id say for me a 100% improvement especially inregards to the waterstream mod...

Click on my sig should get you there, if ya want to give it a go...