GWX (Grey Wolves eXpansion Mod) - Page 200

Zetortue · 01-19-08, 04:34 AM

Hi,

In the Heinz Schaeffer book (U-977) he explains that the periscope and maybe the UZO (can't remember exactly) were linked to the TDC with some kind of mechanic wheels so when moving the periscope (for example you adjust the aim to a specific weak point) the TDC would automatically update the solution too !

But when I practice manual targeting as explained at the end of the book, when I move the periscope the TDC value will stay the same. Am I missing something there ? Thx.

Storabrun · 01-19-08, 06:46 AM

Are you sure the TDC is set to auto update? This is done at the TDC station (F6), when in manual mode you can enter data manually and the TDC will not update if you move the scope. When auto is on you can't enter data manually, but instead it will update automatically when you move your scope.

Zetortue · 01-19-08, 07:46 AM

again, I am stupid !

forgot to set back to auto, because I thought turning back to auto would then take the notepad data again.
anyway, now I can aim with the periscope.

thx !

Red Heat · 01-19-08, 12:28 PM

"DEBUG: Test 1 PASSED
DEBUG: Test 2 PASSED Version is 1.4.0.1
DEBUG: Test 3 PASSED
DEBUG: Test 4 FAILED Size is 6760734
DEBUG: Test 5 FAILED Size is 70298
DEBUG: Test 6 Seems to have PASSED IF Size is not Zero - Size is 1138405
At least one of the tests failed".

Some one can help me please?
Thanks in advance...

donw · 01-19-08, 12:35 PM

It appears you may have a few corrupted .bin files Mate. Compare the MD5 hash codes to each file with whats displayed below...

Users can verify GWX 2.0 file integrity with the following MD5 hash if they so choose:

D1FF0D6BFD651E869E323D393B1D5B1E GWX2.EXE
7B14767E3FD8DD9866D902D6CB4B69FE GWX2-1.BIN
2718CAD3259B5A43DF03AA88DEAB402B GWX2-2.BIN
AB9AF05BD89263A018F383EDA589DE90 GWX2-3.BIN
0FFDB16F197E159E61651DB5D805529A GWX2-4.BIN
753D95679C46DF2C54AF7E93B0CCB6EB GWX2-5.BIN
AB5D09575688802B08156CE1C24C6C88 GWX2-6.BIN
5BF3E05A81D0E4E09F331090FD3C4C7B GWX2-7.BIN

(and read very carefully all the instructions on the GWX download section)

ReallyDedPoet · 01-19-08, 12:38 PM

Good advice from donw

By the way, welcome to SUBSIM

Red Heat

RDP

Jimbuna · 01-19-08, 12:55 PM

Quote:

Originally Posted by Red Heat

"DEBUG: Test 1 PASSED
DEBUG: Test 2 PASSED Version is 1.4.0.1
DEBUG: Test 3 PASSED
DEBUG: Test 4 FAILED Size is 6760734
DEBUG: Test 5 FAILED Size is 70298
DEBUG: Test 6 Seems to have PASSED IF Size is not Zero - Size is 1138405
At least one of the tests failed".

Some one can help me please?
Thanks in advance...

Welcome aboard Kaleun Red Heat

Try ro ensure you get all the necessary files from the same mirror (just to be 100%).....and follow the installation instructions carefully from the GWX website (accessable from my sig)

Red Heat · 01-19-08, 01:03 PM

Thank you to all...
I will check the files one more time...and try to install a new clean installation of the SH3.

danlisa · 01-19-08, 01:06 PM

Can we clear this up, once and for all.

The installer log does NOT indicate corrupt GWX files, It only checks the status of the SH3 Installation on your PC.

So, if you're getting those results, your installation is NOT a clean/unmodded SH3 1.4b.

Kpt. Lehmann · 01-19-08, 01:16 PM

Quote:

Originally Posted by danlisa

Can we clear this up, once and for all.

The installer log does NOT indicate corrupt GWX files, It only checks the status of the SH3 Installation on your PC.

So, if you're getting those results, your installation is NOT a clean/unmodded SH3 1.4b.

Right.

Secondarily, if people are not using the SH3 disk to uninstall SH3... then residual files relating to the stock game may be left behind and 'flagged' by the GWX installer as being problematic.

Uninstall your game using the SH3 disk... then manually delete remaining SH3 files/mods in your Program Files/Ubisoft folder before building a new installation of SH3 patched to version 1.4b.

Doing so will save users and GWX user support personnel a great deal of confusion and consternation.

donw · 01-19-08, 01:18 PM

(Sorry...Off Topic)
How ya feelin Boss? :hmm:

Kpt. Lehmann · 01-19-08, 01:29 PM

Quote:

Originally Posted by donw

(Sorry...Off Topic)
How ya feelin Boss? :hmm:

... like hammered doodoo. LOL

If the fever would just break, all would be fine I think.

donw · 01-19-08, 01:37 PM

Well..I TOLD you to put Vicks on the bottom of your feet and get some socks on...but do you listen to us ...bilge rats?? ...NOOOOOooo!!! :rotfl:

Kpt. Lehmann · 01-19-08, 01:58 PM

Quote:

Originally Posted by donw

Well..I TOLD you to put Vicks on the bottom of your feet and get some socks on...but do you listen to us ...bilge rats?? ...NOOOOOooo!!! :rotfl:

LOL! You've been here four years longer than I have. I'd hardly say that you were a 'bilge rat.'

Though the rest of us did start out as 'bilge-rats' here... its actually pretty cool to think back about such things...

... until you realize that the years are just flying by now... click click click click...

Not getting any younger.

Philipp_Thomsen · 01-19-08, 04:02 PM

@ lehmann :rotfl: :rotfl:

And the post #3000 IS MINE!!!! MUAHAHAHA!

01-19-08, 04:34 AM	#2986
Zetortue Nub Join Date: Feb 2003 Posts: 4 Downloads: 3 Uploads: 0	periscope and tdc Hi, In the Heinz Schaeffer book (U-977) he explains that the periscope and maybe the UZO (can't remember exactly) were linked to the TDC with some kind of mechanic wheels so when moving the periscope (for example you adjust the aim to a specific weak point) the TDC would automatically update the solution too ! But when I practice manual targeting as explained at the end of the book, when I move the periscope the TDC value will stay the same. Am I missing something there ? Thx.

01-19-08, 12:28 PM	#2989
Red Heat Ace of the Deep Join Date: Dec 2007 Location: Portugal Posts: 1,079 Downloads: 243 Uploads: 0	GWX2 Installation error! "DEBUG: Test 1 PASSED DEBUG: Test 2 PASSED Version is 1.4.0.1 DEBUG: Test 3 PASSED DEBUG: Test 4 FAILED Size is 6760734 DEBUG: Test 5 FAILED Size is 70298 DEBUG: Test 6 Seems to have PASSED IF Size is not Zero - Size is 1138405 At least one of the tests failed". Some one can help me please? Thanks in advance...

01-19-08, 12:38 PM	#2991
ReallyDedPoet Canadian Wolf Join Date: Jul 2006 Location: The one and only East Coast Posts: 10,775 Downloads: 946 Uploads: 5	Good advice from donw By the way, welcome to SUBSIM Red Heat RDP __________________ Back in the Day

01-19-08, 01:06 PM	#2994
danlisa Navy Seal Join Date: Oct 2005 Location: Cornwall, UK Posts: 5,499 Downloads: 45 Uploads: 1	Can we clear this up, once and for all. The installer log does NOT indicate corrupt GWX files, It only checks the status of the SH3 Installation on your PC. So, if you're getting those results, your installation is NOT a clean/unmodded SH3 1.4b. __________________

01-19-08, 04:02 PM	#3000
Philipp_Thomsen Old Gang Join Date: Nov 2007 Location: Drunk at the whorehouse Posts: 2,278 Downloads: 146 Uploads: 0	@ lehmann :rotfl: :rotfl: And the post #3000 IS MINE!!!! MUAHAHAHA! __________________ To each his own

01-19-08, 06:46 AM	#2987
Storabrun Loader Join Date: Apr 2006 Posts: 83 Downloads: 0 Uploads: 0	Are you sure the TDC is set to auto update? This is done at the TDC station (F6), when in manual mode you can enter data manually and the TDC will not update if you move the scope. When auto is on you can't enter data manually, but instead it will update automatically when you move your scope.

01-19-08, 07:46 AM	#2988
Zetortue Nub Join Date: Feb 2003 Posts: 4 Downloads: 3 Uploads: 0	again, I am stupid ! forgot to set back to auto, because I thought turning back to auto would then take the notepad data again. anyway, now I can aim with the periscope. thx !

01-19-08, 12:35 PM	#2990
donw Sonar Guy Join Date: Dec 2001 Location: Indiana Posts: 386 Downloads: 25 Uploads: 0	It appears you may have a few corrupted .bin files Mate. Compare the MD5 hash codes to each file with whats displayed below... Users can verify GWX 2.0 file integrity with the following MD5 hash if they so choose: D1FF0D6BFD651E869E323D393B1D5B1E GWX2.EXE 7B14767E3FD8DD9866D902D6CB4B69FE GWX2-1.BIN 2718CAD3259B5A43DF03AA88DEAB402B GWX2-2.BIN AB9AF05BD89263A018F383EDA589DE90 GWX2-3.BIN 0FFDB16F197E159E61651DB5D805529A GWX2-4.BIN 753D95679C46DF2C54AF7E93B0CCB6EB GWX2-5.BIN AB5D09575688802B08156CE1C24C6C88 GWX2-6.BIN 5BF3E05A81D0E4E09F331090FD3C4C7B GWX2-7.BIN (and read very carefully all the instructions on the GWX download section)

01-19-08, 01:03 PM	#2993
Red Heat Ace of the Deep Join Date: Dec 2007 Location: Portugal Posts: 1,079 Downloads: 243 Uploads: 0	Thank you to all... I will check the files one more time...and try to install a new clean installation of the SH3.

01-19-08, 01:18 PM	#2996
donw Sonar Guy Join Date: Dec 2001 Location: Indiana Posts: 386 Downloads: 25 Uploads: 0	(Sorry...Off Topic) How ya feelin Boss? :hmm:

01-19-08, 01:37 PM	#2998
donw Sonar Guy Join Date: Dec 2001 Location: Indiana Posts: 386 Downloads: 25 Uploads: 0	Well..I TOLD you to put Vicks on the bottom of your feet and get some socks on...but do you listen to us ...bilge rats?? ...NOOOOOooo!!! :rotfl: