[REL] Operation Monsun - Page 105

green_abobo · 09-05-09, 08:48 PM

Quote:

Originally Posted by joejccva

Trying out this mod, and I'm also curious.

Are there any other missions besides just patrol missions? I've just started a uboat campaign and every time I finish a patrol and contact HQ through the radio..they just give me a new patrol mission instead of returning to base.

Is this going to loop forever or is there a mission where I have to complete something and then return to base to get ready for the next mission?

Confused.

f.y.i.- i'm pretty sure you can end patrol at home port anytime you wish. if you get innundated w/ objectives and feel you have already done your part,just call it quits.

Akula4745 · 09-05-09, 11:43 PM

Can someone help me understand what each dial is for? Or point me towards a tutorial I may have missed? I am trying to learn more about the German torpedo controls.

If I am correct - dial "B" sets salvo spread and dial "C" controls running depth... but I am at a loss for the others... I have some ideas, but thought I would ask. Thanks in advance.

dmlavan · 09-06-09, 06:15 AM

Akula,
I'm new to OMU (less than 24hrs since I downloaded!). "D" selects an individual torpedo (T) or salvo (S). "A" lets you select which salvo spread, i.e. this jpeg is pointing to a salvo of all 4 forward tubes (I, II, III and IV). If you select Salvo w/ "D", you then use "A" to click on which tubes to use. I believe "E" selects the torpedo range for those torpedoes that have multiple range/speed settings (L would be long range - slowest speed, S would be short range - fastest speed). Not sure about "F"... in SH3 there was a switch to select impact or magentic fuse... this could be it but not sure.

lurker_hlb3 · 09-06-09, 09:12 AM

Quote:

Originally Posted by dmlavan

Akula,
Not sure about "F"... in SH3 there was a switch to select impact or magnetic fuse... this could be it but not sure.

You are correct A= contact fuse / M = magnetic

Akula4745 · 09-06-09, 05:43 PM

Thanks dmlavan... I really appreciate the help sir. I could not find this info documented anywhere. Hopefully this post will be searchable for future skippers with similar questions... as I could not find anything like this in my forum searches. So for others future reference:

Dial "A": lets you select which tubes will launch a salvo, i.e. the arrow in the above image is pointing to a salvo of all 4 forward tubes (I, II, III and IV).

Dial "B": sets salvo spread angle

Dial "C": controls running depth

Dial "D": selects an individual torpedo (T) or salvo (S)

Dial "E": selects the torpedo range for those torpedoes that have multiple range/speed settings (L would be long range - slowest speed, S would be short range - fastest speed)

Dial "F": select impact or magnetic fuse - A= contact fuse / M = magnetic

Reece · 09-07-09, 01:21 AM

Getting some weird German speech problems:
1) For some reason ahead slow and ahead one third are reversed!
2) If I press the "P" key the boat goes to Periscope depth but speech says Ahead Standard, and if I press "S" the boat surfaces but speech once again is Ahead Standard!

Mods:
OpsMonsun_V705
OMv705_to_V712
OM_V712_Hotfix1
OMEGU_v200
OMEGU_v200_Patch1

PS. tried with the following but computer reset itself a couple of times:
RSRDC_SH15_V401
RSRDC_V410_Patch2
OpsMonsun_V705
OMv705_to_V712
OM_V712_Hotfix1
Sh3toSh4.V3_RSRDC_OM

Edit: The problem (2) is with the Commands.cfg file, either OMEGA version v2 or v2 patch 1!

More info found, seems that this is the problem command:
[Cmd164]
Name=Ahead_standard
Ctxt=1
Str=1013
Key0=0x33,C,"3"
Key1=0x50,,"P"
Key2=0x53,,"S"
Key3=0xBA,,";"
I will just delete the last 3 lines, don't know if this is all that needs to be done though!

lurker_hlb3 · 09-07-09, 09:54 AM

Quote:

Originally Posted by Reece

Getting some weird German speech problems:
1) For some reason ahead slow and ahead one third are reversed!
2) If I press the "P" key the boat goes to Periscope depth but speech says Ahead Standard, and if I press "S" the boat surfaces but speech once again is Ahead Standard!

Mods:
OpsMonsun_V705
OMv705_to_V712
OM_V712_Hotfix1
OMEGU_v200
OMEGU_v200_Patch1

PS. tried with the following but computer reset itself a couple of times:
RSRDC_SH15_V401
RSRDC_V410_Patch2
OpsMonsun_V705
OMv705_to_V712
OM_V712_Hotfix1
Sh3toSh4.V3_RSRDC_OM

Edit: The problem (2) is with the Commands.cfg file, either OMEGA version v2 or v2 patch 1!

More info found, seems that this is the problem command:
[Cmd164]
Name=Ahead_standard
Ctxt=1
Str=1013
Key0=0x33,C,"3"
Key1=0x50,,"P"
Key2=0x53,,"S"
Key3=0xBA,,";"
I will just delete the last 3 lines, don't know if this is all that needs to be done though!

That is "NOT" a problem but "as designed", I recommend that you re-read the "readme" that is in the first post of OMEGU thread

Quote:

New / Modified Command Keys

“Periscope Depth” – dive to assign periscope depth, and set speed to “ahead standard”

“Surface” – return to surface, set speed to “ahead standard”, lower all periscopes, and lower snorkel.

Captain von Keldunk · 09-07-09, 10:00 AM

Easy fix is

folder Data/Sound/speech/1 rename ChE_K_Ahead_Slow to ChE_K_Ahead_One_Third.
and ChE_K_Ahead_One_Third to ChE_K_Ahead_Slow.
also for ChE_P and for Che_S.
Why, it is some kind of SH4 thing, I have no idea why

About
S. tried with the following but computer reset itself a couple of times:
RSRDC_SH15_V401
RSRDC_V410_Patch2

should be RSRDC_V401_Patch2
OpsMonsun_V705
OMv705_to_V712
OM_V712_Hotfix1
Sh3toSh4.V3_RSRDC_OM

Reece · 09-07-09, 10:03 AM

@ Lurker_hlb3, Oh I see, I would prefer not to have the speeds changed by these commands, could you please tell me how to put this part back?

If you don't mind of course.

Thanks.

Reece · 09-07-09, 10:05 AM

Quote:

Originally Posted by Captain von Keldunk

Easy fix is

folder Data/Sound/speech/1 rename ChE_K_Ahead_Slow to ChE_K_Ahead_One_Third.
and ChE_K_Ahead_One_Third to ChE_K_Ahead_Slow.
also for ChE_P and for Che_S.
Why, it is some kind of SH4 thing, I have no idea why

I did actually!! Just seemed weird to have to do it!

Von Talon · 09-07-09, 10:33 AM

Crashes after the loading after the intros. I have downloaded the only 705 version, and activated it by JSGME. This might sound like dumb question, but does this reguire the U-Boat Missions Expansion?

lurker_hlb3 · 09-07-09, 11:26 AM

Quote:

Originally Posted by Von Talon

This might sound like dumb question, but does this reguire the U-Boat Missions Expansion?

Yes

hotlead · 09-07-09, 12:52 PM

I just did 2 missions on my first patrol and i am unable to dock back at my homebase, the end patrol option in the middle is greyed out, postpone and refit work fine, any help?

lurker_hlb3 · 09-07-09, 02:56 PM

Quote:

Originally Posted by hotlead

I just did 2 missions on my first patrol and i am unable to dock back at my homebase, the end patrol option in the middle is greyed out, postpone and refit work fine, any help?

All I ask of people when the have a “comment / compliant" is to provide the following information:

Date
Location
Type of sub
Flotilla assigned

lurker_hlb3 · 09-07-09, 03:00 PM

Quote:

Originally Posted by Reece

@ Lurker_hlb3, Oh I see, I would prefer not to have the speeds changed by these commands, could you please tell me how to put this part back?

If you don't mind of course.

Thanks.

Just change to this

[Cmd164]
Name=Ahead_standard
Ctxt=1
Str=1013
Key0=0x33,C,"3"

09-05-09, 11:43 PM	#1562
Akula4745 Convicted Ship Killer Join Date: Mar 2009 Location: Just out of sight... plotting your course and speed Posts: 846 Downloads: 371 Uploads: 1	Can someone help me understand what each dial is for? Or point me towards a tutorial I may have missed? I am trying to learn more about the German torpedo controls. If I am correct - dial "B" sets salvo spread and dial "C" controls running depth... but I am at a loss for the others... I have some ideas, but thought I would ask. Thanks in advance. __________________ Akula4745 "If you sit by the river long enough... the body of your enemy will float by -- SunTzu"

09-06-09, 05:43 PM	#1565
Akula4745 Convicted Ship Killer Join Date: Mar 2009 Location: Just out of sight... plotting your course and speed Posts: 846 Downloads: 371 Uploads: 1	OM torpedo settings - Dials explained Thanks dmlavan... I really appreciate the help sir. I could not find this info documented anywhere. Hopefully this post will be searchable for future skippers with similar questions... as I could not find anything like this in my forum searches. So for others future reference: Dial "A": lets you select which tubes will launch a salvo, i.e. the arrow in the above image is pointing to a salvo of all 4 forward tubes (I, II, III and IV). Dial "B": sets salvo spread angle Dial "C": controls running depth Dial "D": selects an individual torpedo (T) or salvo (S) Dial "E": selects the torpedo range for those torpedoes that have multiple range/speed settings (L would be long range - slowest speed, S would be short range - fastest speed) Dial "F": select impact or magnetic fuse - A= contact fuse / M = magnetic __________________ Akula4745 "If you sit by the river long enough... the body of your enemy will float by -- SunTzu" Last edited by Akula4745; 09-06-09 at 11:42 PM.

09-07-09, 01:21 AM	#1566
Reece CINC Pacific Fleet Join Date: Sep 2003 Location: Down Under Posts: 32,744 Downloads: 171 Uploads: 0	Getting some weird German speech problems: 1) For some reason *ahead slow* and *ahead one third* are reversed! 2) If I press the "P" key the boat goes to Periscope depth but speech says Ahead Standard, and if I press "S" the boat surfaces but speech once again is *Ahead Standard! Mods: OpsMonsun_V705 OMv705_to_V712 OM_V712_Hotfix1 OMEGU_v200 OMEGU_v200_Patch1 PS. tried with the following but computer reset itself a couple of times: RSRDC_SH15_V401 RSRDC_V410_Patch2 OpsMonsun_V705 OMv705_to_V712 OM_V712_Hotfix1 Sh3toSh4.V3_RSRDC_OM Edit:* The problem (2) is with the Commands.cfg file, either OMEGA version v2 or v2 patch 1! More info found, seems that this is the problem command: [Cmd164] Name=Ahead_standard Ctxt=1 Str=1013 Key0=0x33,C,"3" Key1=0x50,,"P" Key2=0x53,,"S" Key3=0xBA,,";" I will just delete the last 3 lines, don't know if this is all that needs to be done though! __________________ *Sub captains go down with their ship!* Last edited by Reece; 09-07-09 at 09:11 AM.

09-07-09, 10:00 AM	#1568
Captain von Keldunk Sonar Guy Join Date: Dec 2007 Posts: 376 Downloads: 187 Uploads: 21	ahead slow and ahead one third Easy fix is folder Data/Sound/speech/1 rename ChE_K_Ahead_Slow to ChE_K_Ahead_One_Third. and ChE_K_Ahead_One_Third to ChE_K_Ahead_Slow. also for ChE_P and for Che_S. Why, it is some kind of SH4 thing, I have no idea why About S. tried with the following but computer reset itself a couple of times: RSRDC_SH15_V401 RSRDC_V410_Patch2 should be RSRDC_V401_Patch2 OpsMonsun_V705 OMv705_to_V712 OM_V712_Hotfix1 Sh3toSh4.V3_RSRDC_OM __________________ SH

09-07-09, 10:03 AM	#1569
Reece CINC Pacific Fleet Join Date: Sep 2003 Location: Down Under Posts: 32,744 Downloads: 171 Uploads: 0	@ Lurker_hlb3, Oh I see, I would prefer not to have the speeds changed by these commands, could you please tell me how to put this part back? If you don't mind of course. Thanks. __________________ *Sub captains go down with their ship!*

09-06-09, 06:15 AM	#1563
dmlavan Watch Officer Join Date: Oct 2006 Location: Jacksonville, FL Posts: 347 Downloads: 69 Uploads: 0	Akula, I'm new to OMU (less than 24hrs since I downloaded!). "D" selects an individual torpedo (T) or salvo (S). "A" lets you select which salvo spread, i.e. this jpeg is pointing to a salvo of all 4 forward tubes (I, II, III and IV). If you select Salvo w/ "D", you then use "A" to click on which tubes to use. I believe "E" selects the torpedo range for those torpedoes that have multiple range/speed settings (L would be long range - slowest speed, S would be short range - fastest speed). Not sure about "F"... in SH3 there was a switch to select impact or magentic fuse... this could be it but not sure.

09-07-09, 10:33 AM	#1571
Von Talon A-ganger Join Date: Apr 2009 Location: Finland Posts: 80 Downloads: 67 Uploads: 0	Crashes after the loading after the intros. I have downloaded the only 705 version, and activated it by JSGME. This might sound like dumb question, but does this reguire the U-Boat Missions Expansion? __________________ Water is important. If there would be no water, no one could learn to swim and everybody would drown.

09-07-09, 12:52 PM	#1573
hotlead Watch Join Date: Sep 2009 Posts: 20 Downloads: 30 Uploads: 0	I just did 2 missions on my first patrol and i am unable to dock back at my homebase, the end patrol option in the middle is greyed out, postpone and refit work fine, any help?