Issue With Mods Activating Through JSGME

Kaptlt.Endrass · 07-08-18, 10:49 PM

Heyo folks! Finally got GWX 3.0 up and running again, much to my delight and satisfaction. Also took care of the SH3 install, and was all set to go.

I've activated a few of the mods that come with GWX (Namely, the 'No Medals on Crew', 'Open Hatch', and '18km Atmosphere'.) However, despite Jonesoft reading them as activated, the changes have not occurred in-game yet.

Thanks in advance, and glad to be back!

schlechter pfennig · 07-08-18, 11:25 PM

Mods usually need to be activated between missions (i.e. when 'in port'). Also, they need to be placed in the mod folder in a proper file structure; for instance, [mod name] (folder)/data (folder)/ xxxx. Otherwise even though JSGME shows them as activated, the applicable file(s) have been copied to the incorrect locations.

XenonSurf · 07-08-18, 11:27 PM

Is your JSGME install pointing to the right game folder? That is: In your SH3 game folder, is there a MODS folder and is your JSGME.exe located in the main game folder? That's how it should be before and after activating the GWX3 mods.

Then, you mean the 16km Atmosphere, not 18...

Kaptlt.Endrass · 07-09-18, 12:07 PM

I've got it as mentioned, but the mods still refuse to work. The JSGME.exe is in the main folder, and the MODS folder is where it should be as well, with the mods.

I tried opening JSGME through the exe file as opposed to the desktop shortcut to activate the mods, but to no avail.

XenonSurf · 07-09-18, 12:38 PM

Quote:

Originally Posted by Kaptlt.Endrass

I tried opening JSGME through the exe file as opposed to the desktop shortcut to activate the mods, but to no avail.

This should not happen, JSGME should open its window if you launch via JSGME.exe. Your desktop shortcut is likely pointing to another SH3 version. Have you more versions installed? Check the shortcut by right-clicking on it to see where it points. It must point to your current GWX3 install folder.

Do this:
Retry launching the JSGME.exe, if it doesn't work, in your SH3 game folder, delete the JSGME.ini and re-launch the JSGME.exe, activate your mods and launch game. It should work, but the mods you mention are hard to monitor to see their effects, you cannot easily say they don't work... Have you activated a widescreen mod? This one is easy to monitor.

If it works, create a shortcut with JSGME.exe. If it doesn't work... :

Else, something has gone badly in your GWX3 install. Is your game folder protected? You should install SH3 e.g. in c:\games\SH3 which will NOT be a protected folder.
If you have the Steam version, then you must read the stickies, I cannot help you, but I know you must first have the game patched to 1.4b before installing GWX3.0. Steam and SH series fit together like salt and sugar...

Kaptlt.Endrass · 07-09-18, 03:33 PM

Alright, I honestly have no clue what's happening anymore.

I started a new campaign just now, through SH3 Commander, to see if it worked. I also set it to skip the intros, which it didn't, but the save for my created career was there and it seems to be in order.

I deactivated the GWX mods I was going for, just to see if SH3 Commander alone has any issues. So far, it seems to be working.

Should I just uninstall altogether and reinstall the game into a different folder (Program Files or Games as opposed to Program Files x86)? I never had this issue with my other computer...everything worked quite well.

I was also thinking about trying to download something like a U-boat skin mod, test that out. Worth a shot?

XenonSurf · 07-09-18, 07:32 PM

The modifications by SH3 Commander have NOTHING to do with your mods in JSGME !!

07-08-18, 10:49 PM	#1
Kaptlt.Endrass Sonar Guy Join Date: Feb 2014 Location: No Longer On A Big Grey Floaty Thing Posts: 395 Downloads: 96 Uploads: 0	Issue With Mods Activating Through JSGME Heyo folks! Finally got GWX 3.0 up and running again, much to my delight and satisfaction. Also took care of the SH3 install, and was all set to go. I've activated a few of the mods that come with GWX (Namely, the 'No Medals on Crew', 'Open Hatch', and '18km Atmosphere'.) However, despite Jonesoft reading them as activated, the changes have not occurred in-game yet. Thanks in advance, and glad to be back! __________________ "That flag and I are twins, born in the same hour from the same womb of destiny. We cannot be parted in life or in death; so long as we float, we shall float together." As much as I dislike it sometimes, I'm a tin can sailor, through and through.

07-09-18, 12:07 PM	#4
Kaptlt.Endrass Sonar Guy Join Date: Feb 2014 Location: No Longer On A Big Grey Floaty Thing Posts: 395 Downloads: 96 Uploads: 0	I've got it as mentioned, but the mods still refuse to work. The JSGME.exe is in the main folder, and the MODS folder is where it should be as well, with the mods. I tried opening JSGME through the exe file as opposed to the desktop shortcut to activate the mods, but to no avail. __________________ "That flag and I are twins, born in the same hour from the same womb of destiny. We cannot be parted in life or in death; so long as we float, we shall float together." As much as I dislike it sometimes, I'm a tin can sailor, through and through.

07-09-18, 03:33 PM	#6
Kaptlt.Endrass Sonar Guy Join Date: Feb 2014 Location: No Longer On A Big Grey Floaty Thing Posts: 395 Downloads: 96 Uploads: 0	Alright, I honestly have no clue what's happening anymore. I started a new campaign just now, through SH3 Commander, to see if it worked. I also set it to skip the intros, which it didn't, but the save for my created career was there and it seems to be in order. I deactivated the GWX mods I was going for, just to see if SH3 Commander alone has any issues. So far, it seems to be working. Should I just uninstall altogether and reinstall the game into a different folder (Program Files or Games as opposed to Program Files x86)? I never had this issue with my other computer...everything worked quite well. I was also thinking about trying to download something like a U-boat skin mod, test that out. Worth a shot? __________________ "That flag and I are twins, born in the same hour from the same womb of destiny. We cannot be parted in life or in death; so long as we float, we shall float together." As much as I dislike it sometimes, I'm a tin can sailor, through and through.

07-09-18, 07:32 PM	#7
XenonSurf Sea Lord Join Date: Apr 2008 Location: Germany, Italy Posts: 1,703 Downloads: 107 Uploads: 4	The modifications by SH3 Commander have NOTHING to do with your mods in JSGME !! Last edited by XenonSurf; 07-09-18 at 07:44 PM.

07-08-18, 11:25 PM	#2
schlechter pfennig Commander Join Date: Mar 2010 Posts: 457 Downloads: 52 Uploads: 7	Mods usually need to be activated between missions (i.e. when 'in port'). Also, they need to be placed in the mod folder in a proper file structure; for instance, [mod name] (folder)/data (folder)/ xxxx. Otherwise even though JSGME shows them as activated, the applicable file(s) have been copied to the incorrect locations.

07-08-18, 11:27 PM	#3
XenonSurf Sea Lord Join Date: Apr 2008 Location: Germany, Italy Posts: 1,703 Downloads: 107 Uploads: 4	Is your JSGME install pointing to the right game folder? That is: In your SH3 game folder, is there a MODS folder and is your JSGME.exe located in the main game folder? That's how it should be before and after activating the GWX3 mods. Then, you mean the 16km Atmosphere, not 18...