SH3 Commander-The Complete Super Deluxe Thallium Commander's Special Ultimate Edition - Page 4

Tweety · 01-13-10, 12:23 AM

Hello Everyone,

Sorry about posting this here. I didn't know if I should start a new thread or not.
I went into SH3 commander and clicked on the name I was using to start a 2nd patrol during my career. I came across a problem I wondering if I can get some help this.

This little picture of the error code was on top of the SH3 commander.
I didn't know how to take a screen shot of the error code on top of the bigger SH3 commander picture. I was only able to take two separate pictures.

I am using
GWX
MAGUI

Does anyone have an idea how to fix this or do I need to start a new career.

Tweety

JScones · 01-13-10, 12:30 AM

Assuming you didn't revert to a previous save point (say after dieing during a career), then, as per the GWX manual:

Quote:

The following are stock Silent Hunter III issues the GWX Team is unable to address:

- If you upgrade your U-boat before the first patrol of a new career, you may not receive any renown for ships sunk during the first patrol, so you should not upgrade or change anything on your U-boat on your first patrol of a new career before leaving port. Some players report that using <ESC> to end your patrol when close to your base but not necessarily in the harbor itself can avoid this problem.

- If you upgrade your U-boat at the end of the current patrol you may not receive any credit for ships sunk during the patrol, so you should upgrade your U-boat only when you are ashore and about to leave for the next patrol

These SH3 bugs also impact SH3Cmdr because data that SH3Cmdr relies upon does not exist in the game (it's not just renown and tonnage that SH3 fails to correctly record, it's dates as well).

If you have noticed no tonnage or renown for your first patrol, this will be definitely the case (of course, you will know anyway if you remember upgrading before starting patrol 1). A manual fix is possible if you know your way around the files (a question not for this thread though), but IMHO it would be easier just to start a new career and keep in mind the above suggestion.

Also note that if you ever revert to a previous save game (say you died during patrol 2 so reverted back to the beginning of patrol 1), this error will also occur. You need to have CORRECTLY started at least ONE patrol before you can access your Commander's details.

gamer025 · 02-04-10, 11:05 PM

SH3 Commander is one of the neatest little mods there is.

Magic1111 · 02-05-10, 01:53 AM

Quote:

Originally Posted by gamer025

SH3 Commander is one of the neatest little mods there is.

I agree !!!

Best regards,
Magic

Jimbuna · 02-05-10, 05:07 AM

Quote:

Originally Posted by gamer025

SH3 Commander is one of the neatest little mods there is.

SH3 Commander...never go to sea without it

mwilg · 02-26-10, 05:09 PM

Have installed v3.2 and very nice, but how did you get a 'print out' (in Mozilla) of the patrol log like that? The only display I can seem to find, either within SH3 Commander or SH3 itself is as attached (um...assuming I can figure out how to attach or upload from here! If not, then as one would see when clicking the Patrol Log link in Commander).
Also, is there a way to edit it during patrols, since I often have no recollection of exactly when I reached a certain grid, after however many weeks it takes to play one patrol?

Rapt0r56 · 02-26-10, 05:32 PM

Quote:

Quote:
Originally Posted by gamer025

SH3 Commander is one of the neatest little mods there is.

I agree !!!

I can't live without it, it's one of the must haves besides GWX.

Paulski · 12-27-10, 01:20 PM

I want to install SHIII commander to get rid of the crew fatique, but both download links are broken

Anyone got a working link?

Urmel · 12-27-10, 01:28 PM

hi Paulski

U can download the latest "SH3 Commander" any time from our Website here:
» http://www.lsh3.com/v5/tools_en.html

Greets from Urmel

Jimbuna · 12-27-10, 02:30 PM

I've uploaded it to my FF account to increase the number of sources.

I will of course remove it if Jaesen objects.

http://www.filefront.com/17709755/SH3Cmdr32.7z/

CherryHarbey · 01-01-11, 10:45 AM

posts 520 and 521 have new links

ROMMEL_HSQ · 04-07-11, 07:13 AM

Hi,

I would like to downlaod your mod and use it but it seems the two links in the OP aren't working.

frau kaleun · 04-07-11, 07:33 AM

Quote:

Originally Posted by ROMMEL_HSQ

Hi,

I would like to downlaod your mod and use it but it seems the two links in the OP aren't working.

It's in Subsim Downloads:

http://www.subsim.com/radioroom/down...o=file&id=2923

ROMMEL_HSQ · 04-07-11, 07:42 AM

Quote:

Originally Posted by frau kaleun

It's in Subsim Downloads:

http://www.subsim.com/radioroom/down...o=file&id=2923

Thanks alot!

frau kaleun · 04-07-11, 07:46 AM

Quote:

Originally Posted by ROMMEL_HSQ

Thanks alot!

You're very welcome - have fun!

01-13-10, 12:23 AM	#1
Tweety Planesman Join Date: Jan 2009 Location: Canada Posts: 188 Downloads: 157 Uploads: 0	Problen starting a game with SH3 commander Hello Everyone, Sorry about posting this here. I didn't know if I should start a new thread or not. I went into SH3 commander and clicked on the name I was using to start a 2nd patrol during my career. I came across a problem I wondering if I can get some help this. This little picture of the error code was on top of the SH3 commander. I didn't know how to take a screen shot of the error code on top of the bigger SH3 commander picture. I was only able to take two separate pictures. I am using GWX MAGUI Does anyone have an idea how to fix this or do I need to start a new career. Tweety

02-26-10, 05:09 PM	#6
mwilg Nub Join Date: Feb 2010 Posts: 3 Downloads: 1 Uploads: 0	Viewing Patrol Log Have installed v3.2 and very nice, but how did you get a 'print out' (in Mozilla) of the patrol log like that? The only display I can seem to find, either within SH3 Commander or SH3 itself is as attached (um...assuming I can figure out how to attach or upload from here! If not, then as one would see when clicking the Patrol Log link in Commander). Also, is there a way to edit it during patrols, since I often have no recollection of exactly when I reached a certain grid, after however many weeks it takes to play one patrol? Last edited by mwilg; 02-26-10 at 05:36 PM. Reason: Ok, so I couldn't find a way to post the image...

12-27-10, 01:28 PM	#9
Urmel LSH2020 Manager Join Date: Apr 2009 Location: Switzerland Posts: 188 Downloads: 6 Uploads: 0	hi Paulski U can download the latest "SH3 Commander" any time from our Website here: » http://www.lsh3.com/v5/tools_en.html Greets from Urmel __________________ LSH3 DOWNLOAD - LSH3 VIDEOS YOUTUBE - TUTORIALS by THEBERBSTER

12-27-10, 02:30 PM	#10
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 181,344 Downloads: 63 Uploads: 13	I've uploaded it to my FF account to increase the number of sources. I will of course remove it if Jaesen objects. http://www.filefront.com/17709755/SH3Cmdr32.7z/ __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!! GWX3.0 Download Page - Donation/instant access to GWX (Help SubSim)

02-04-10, 11:05 PM	#3
gamer025 Swabbie Join Date: Jan 2010 Posts: 7 Downloads: 23 Uploads: 0	SH3 Commander is one of the neatest little mods there is.

12-27-10, 01:20 PM	#8
Paulski A-ganger Join Date: Jun 2010 Posts: 74 Downloads: 47 Uploads: 0	I want to install SHIII commander to get rid of the crew fatique, but both download links are broken Anyone got a working link?

01-01-11, 10:45 AM	#11
CherryHarbey Engineer Join Date: Jul 2010 Location: Derby, UK Posts: 200 Downloads: 86 Uploads: 0	posts 520 and 521 have new links

04-07-11, 07:13 AM	#12
ROMMEL_HSQ Swabbie Join Date: Apr 2011 Posts: 8 Downloads: 6 Uploads: 0	Hi, I would like to downlaod your mod and use it but it seems the two links in the OP aren't working.