SH3 GWX OneAlex Edition” csubtorpedoctrl” error.

[parkerc341]

Hello, i have freshly installed SH3 GwX onealex edition. and i attempted to launch patrol only to be greeted by this error. reinstalling and deleting save and replay folders does not help. i cannot start any type of mission, whether that be a museum trip or a subarctic patrol. Any help is appreciated.

[blackswan40]

Hi parkerc341 Welcome to Subsim

This Onealex Guide was given to me by Doolar follow the steps below and all will be fine

INSTALLATION OF ONEALEX
1. Download ONEALEX 1.53 and UnZip the SH3 Folder to your choice of location (not in
Program Files).
2. Open the SH3 folder and locate these 3 executables, the SH3.exe, Cmdr.exe (located
in the SH3 Commander’s English Folder) and the JSGME.exe. Change each executable ,
by right clicking and selecting their Properties, change to WIN7 compatibly / and run as ADMIN. (this is very important)
3. Start the game via the SH3.exe, (not SH3 Commander) to set a SAVE FOLDER. (if
you don’t already have a SAVE FOLDER from a previous installation, this will create
one).
4. Set game OPTIONS to GERMAN LANGUAGE (or you will have no voices).
5. Exit game.
6. Add Mods to MODS Folder then activate via JSGME. I recommend the following. (MY
OPINION ONLY)
A. No U-Mark
B. Units Without ponytails
C. Negative Buoyancy
D. New Water (Atlantic)
E. Ship Pk for OneAlex 1.35 (May 23) [REL] found at Merchant Fleet mod (Onealex mod
version) - SUBSIM Radio Room Forums
https://www.subsim.com/radioroom/sho...d.php?t=250819
F. Late Sensors Comp (starting in 1943)
G. Late War Sensors Snorkel Antennas (when you get a snorkel)
H. U-Boat Skin of choice to match the boat you’ll be playing
7. Place Cmdr Shortcut for your convenience. R-click Cmdr.exe, select "PIN TO
TASKBAR" or PIN TO START . (Totally Un-Necessary, I do this for my convenience, to
start the game easier)
8. Place JSGME Shortcut for your convenience. R-click JSGME.exe, select "PIN TO
TASKBAR" or PIN TO START . (Totally Un-Necessary, I do this for my convenience, to
adjust the game add-in mods easier)
9. Set OPTIONS in SH3 Cmdr. to your liking.
10. Setup Career & Play, via SH3 Commander

Adjusting the S.Hie Option Selector

Alex has these settings set for, what works best for his Mod, so I myself don't mess with them.
1. Copy your SH3.exe from your SH3 game (installation) folder and place it in your SH3 game/ Support folder/Stiebler4c_v16B1 Folder.
2. Now, you can run the HsieOptionsSlector_v16B1.exe. You CAN NOT run the
HsieOptionsSlector without the SH3.exe temporarily located in the SH3 game/ Support
folder/Stiebler4c_v16B1 folder.
3. Make your changes and exit the HsieOptionsSlector and you'll get a message that
your SH3.exe has been "updated"
4. Now, when your back to the SH3 game/ Support folder/Stiebler4c_v16B1 Folder,
move your newly patched SH3.exe back to your SH3 game folder, like it was in step 1.

Please note
the first time you start SH3 via SH3 Commander, you'll see a dialog box to direct your SH3 and SH3 Commander to your newly created "Save Game Folder" Select that Install

Hope this helps

[Aktungbby]

parkerc341!

[Kal_Maximus_U669]

Hey parkerc341 Greetings and welcome to the World's most famous SUBSIM subsimmer site..
to complete what blackswan40 tells you that I salute ..
Do not play a mission on the same installation as the one where you play a campaign it is better to have a single installation for the campaign and another installation for the missions otherwise you will have problems in perspective it is inevitable...
For the settings in "Order" proceed like this see screens
here install path of your game

here Carrer option

Here Meteo option (not integritie)

here the settings speak for themselves according to the titles

here install path "order"

Good editing is good fun Alex's mods are great you'll see

[parkerc341]

Even after following your instuctions Blackswan, my game gives me the same error. I am beginning to lose hope.

[parkerc341]

Originally Posted by blackswan40

Hi parkerc341 Welcome to Subsim

This Onealex Guide was given to me by Doolar follow the steps below and all will be fine

INSTALLATION OF ONEALEX
1. Download ONEALEX 1.53 and UnZip the SH3 Folder to your choice of location (not in
Program Files).
2. Open the SH3 folder and locate these 3 executables, the SH3.exe, Cmdr.exe (located
in the SH3 Commander’s English Folder) and the JSGME.exe. Change each executable ,
by right clicking and selecting their Properties, change to WIN7 compatibly / and run as ADMIN. (this is very important)
3. Start the game via the SH3.exe, (not SH3 Commander) to set a SAVE FOLDER. (if
you don’t already have a SAVE FOLDER from a previous installation, this will create
one).
4. Set game OPTIONS to GERMAN LANGUAGE (or you will have no voices).
5. Exit game.
6. Add Mods to MODS Folder then activate via JSGME. I recommend the following. (MY
OPINION ONLY)
A. No U-Mark
B. Units Without ponytails
C. Negative Buoyancy
D. New Water (Atlantic)
E. Ship Pk for OneAlex 1.35 (May 23) [REL] found at Merchant Fleet mod (Onealex mod
version) - SUBSIM Radio Room Forums
https://www.subsim.com/radioroom/sho...d.php?t=250819
F. Late Sensors Comp (starting in 1943)
G. Late War Sensors Snorkel Antennas (when you get a snorkel)
H. U-Boat Skin of choice to match the boat you’ll be playing
7. Place Cmdr Shortcut for your convenience. R-click Cmdr.exe, select "PIN TO
TASKBAR" or PIN TO START . (Totally Un-Necessary, I do this for my convenience, to
start the game easier)
8. Place JSGME Shortcut for your convenience. R-click JSGME.exe, select "PIN TO
TASKBAR" or PIN TO START . (Totally Un-Necessary, I do this for my convenience, to
adjust the game add-in mods easier)
9. Set OPTIONS in SH3 Cmdr. to your liking.
10. Setup Career & Play, via SH3 Commander

Adjusting the S.Hie Option Selector

Alex has these settings set for, what works best for his Mod, so I myself don't mess with them.
1. Copy your SH3.exe from your SH3 game (installation) folder and place it in your SH3 game/ Support folder/Stiebler4c_v16B1 Folder.
2. Now, you can run the HsieOptionsSlector_v16B1.exe. You CAN NOT run the
HsieOptionsSlector without the SH3.exe temporarily located in the SH3 game/ Support
folder/Stiebler4c_v16B1 folder.
3. Make your changes and exit the HsieOptionsSlector and you'll get a message that
your SH3.exe has been "updated"
4. Now, when your back to the SH3 game/ Support folder/Stiebler4c_v16B1 Folder,
move your newly patched SH3.exe back to your SH3 game folder, like it was in step 1.

Please note
the first time you start SH3 via SH3 Commander, you'll see a dialog box to direct your SH3 and SH3 Commander to your newly created "Save Game Folder" Select that Install

Hope this helps

I am sorry, even after your instructions, i get the same error. My hope is beginning to fade, as I simply want to patrol

[blackswan40]

Hi parkerc341 have you installed Onealex mod outside program files X86
if its installed in program files X86 the windows security will mess things up for sure.

[parkerc341]

Originally Posted by blackswan40

Hi parkerc341 have you installed Onealex mod outside program files X86
if its installed in program files X86 the windows security will mess things up for sure.

I have placed it insideo of my C drive, but not the program files.

[parkerc341]

I found my fix. My antivirus was blocking SH3 GWX Onealex features. lord knows i feel like an idiot... see you in the seas, skippers!

[blackswan40]

Hi Parkerc341 great news glad your all sorted what delights and surprises are instore for you GWXOneAlex Mod is a work of Art and a labour of Love enjoy
and Happy Hunting Sir

[Doolar]

[duckyll]

were can u download the GWXOneAlex Mod

[Aktungbby]

duckyII! after a 5 year 'silent run'!

[blackswan40]

Hi Ducky GWXOneAlex Mod Download below


https://maikhaas.synology.me:5001/fs...ALEX%20EDITION


ensure your aintivirus software doesn't mess with your install or running the mod

[duckyll]

still CTD even after adding and allowing the app in my windows 10 defender firewall