GWX Issues Post Here - Page 2

bigboywooly · 12-16-06, 11:19 PM

Odd
I just clicked it in your post and got mega upload

12-16-06, 11:19 PM

I didn't do the MD5, but I did blow everything off the hard drive and reinstall. Without SH3 Commander installed yet, I was able to make a career in SH3 directly with the 30th/33rd Flotilla. So it looks like whatever problem I was having it was mine and mine alone.

Thanks for the help.

Razman23 · 12-16-06, 11:32 PM

Quote:

Originally Posted by Fab

I didn't do the MD5, but I did blow everything off the hard drive and reinstall. Without SH3 Commander installed yet, I was able to make a career in SH3 directly with the 30th/33rd Flotilla. So it looks like whatever problem I was having it was mine and mine alone.

Thanks for the help.

Are these the asian subs?

If so, you need to make the days inbetween patrols -----> 55 days.

I read it in the GWX manual concerning using Commander.

Razman23 · 12-16-06, 11:34 PM

Quote:

Originally Posted by bigboywooly

Well I just chose the 2nd flot in a VIIB through commander and again ingame and I started in Wilhelmshaven in a VIIB
By default the games first selection is the 1st flot
As posted above you need to select 2nd flot

Yes, I loaded the GWX files needed for Commander.

I think what happened is what others have said. I forgot to double check before I hit start.

No big deal, just delete campaign and start a new one.

Corrupt_File · 12-16-06, 11:48 PM

There doesnt seem to be Torpedo visuals when selecting them in port?

JScones · 12-17-06, 03:15 AM

Quote:

Originally Posted by Fab

Quote:

Originally Posted by bigboywooly

Yes of course the 30th is included
Do you have the right dates ?
October 1942 in SH3commander

Yes, in October '42 I see the following:

1st
2nd
7th
10th
11th
29th
33rd

No 30th. If I click on the 33rd it says

10/42 to 07/44 - Error!
08/44 to 05/45 - Flensburg

You sure your SH3Cmdr is pointing to your GWX installation? If SH3Cmdr lists anything OTHER THAN:

1st Flotilla
2nd Flotilla
7th/13th Flotilla <note the difference!>
10th Flotilla
11th Flotilla
23rd/29th Flotilla <note the difference!>
12th Flotilla
30th/33rd Flotilla <note the difference!>

for the Flotillas AND you have GWX installed, then SH3Cmdr has not been correctly set up to point to your GWX installation. Make sure you use the /l switch appropriately.

Vermin · 12-17-06, 07:49 AM

What a fantastic mod - thanks folks!

A funny thing happened to me in El- Ferrol. I had fled to the nearest neutral port to patch up my boat after a disastrous passage through the channel....

I stopped a few hundred yards off the wharf in El-Ferrol and ended the mission.

My only option to end patrol was to return to base - which I clicked on....

and then suddenly I ended in Willhelmshaven! LOL

Probably user error on my part but the Spanish were very helpful! :rotfl:

Vermin

The Noob · 12-17-06, 08:26 AM

A bit off topic, but does the GWX Auto-Installer check the game exe files?

JScones · 12-17-06, 08:28 AM

Quote:

Originally Posted by The Noob

A bit off topic, but does the GWX Auto-Installer check the game exe files?

Yes .

hyperion2206 · 12-17-06, 08:40 AM

I installed GWX and everything is fine except that I don't have any sound! At first I could hear a bit of music but I had to turn up the volume to almost 100% and now the sound is gone completly.

Do you have a clue whats wrong?

alexoscar · 12-17-06, 11:12 AM

This is the Pyro Ship I found in North Sea today. As you can see, there are a lot of textures or polygons missing:

Any idea? Is the first issue I find with GWX. Congratulations again for your work guys. You are the reason Im yet playing SHIII.

Regards

12-17-06, 11:39 AM

Started patrol in Jan 1942....encountered 2 tankers and a med cargo SW of ireland, all flying Irish Flag.

Then encountered single Medium Cargo which I sank with deck gun within 10 rounds aimed below waterline at long range......bit suprised she sank so quickly.

As a manual targeting kinda guy, I really miss the slide out TDC mod that appears in NYGM 2.2.....any chance it could be added or is there a reason why not ? I ask because i'd be happy to add it myself if its compatible.

Thats it so far...except the crew fatigue model, gonna have to turn that off as everyone had red eclamation marks after crossing BoB.....way to quick. Also damage model didn't deactivate at high compressions.

Just to note, clean install + patch, no mods, using SH3 Com 2.7 with GWX CFG files installed.

Cheers, Hans.

AG124 · 12-17-06, 12:09 PM

On the subject of the Pyro, it seems the correct deck texture got omitted by mistake (it was a busy time for the team after all). The UV Mapping was corrected on all of my ships by ref, and new deck textures were made by Boris to match the new deck areas. Hopefully, we will be able to release the correct versions in an update.

You may also notice that the Chatham has this problem as well, and the Rose Castle is not the correctly UV Mapped version.

bunkerratt · 12-17-06, 01:20 PM

ok..after uncorrupting the 1st install of gwx it seems to be stable...however..how the hell do i get the subskin to change/..i prefer fubars dark rusty 9b..i tried to load it into textures tnormal tex as before..no dice..any ideas?....

bigboywooly · 12-17-06, 01:25 PM

Quote:

Originally Posted by bunkerratt

ok..after uncorrupting the 1st install of gwx it seems to be stable...however..how the hell do i get the subskin to change/..i prefer fubars dark rusty 9b..i tried to load it into textures tnormal tex as before..no dice..any ideas?....

You may need to import it into the dat
Not my area but I think thats how it goes

12-16-06, 11:19 PM	#16
bigboywooly Rear Admiral Join Date: Apr 2006 Location: Swindon, England Posts: 10,151 Downloads: 35 Uploads: 0	Odd I just clicked it in your post and got mega upload __________________ My mediafire page http://www.mediafire.com/?11eoq19bq9r41

12-17-06, 11:12 AM	#26
alexoscar Gunner Join Date: Apr 2005 Location: Valencia, Spain Posts: 94 Downloads: 72 Uploads: 0	Strange issue with Pyro ship skin This is the Pyro Ship I found in North Sea today. As you can see, there are a lot of textures or polygons missing: Any idea? Is the first issue I find with GWX. Congratulations again for your work guys. You are the reason Im yet playing SHIII. Regards

12-17-06, 12:09 PM	#28
AG124 Sea Lord Join Date: Jun 2005 Location: Canada Posts: 1,878 Downloads: 4 Uploads: 0	Ships' Textures On the subject of the Pyro, it seems the correct deck texture got omitted by mistake (it was a busy time for the team after all). The UV Mapping was corrected on all of my ships by ref, and new deck textures were made by Boris to match the new deck areas. Hopefully, we will be able to release the correct versions in an update. You may also notice that the Chatham has this problem as well, and the Rose Castle is not the correctly UV Mapped version. __________________ DOWNLOAD GWX HERE: http://www.thegreywolves.com/index.html

12-16-06, 11:19 PM	#17
Fab Stowaway Posts: n/a Downloads: Uploads:	I didn't do the MD5, but I did blow everything off the hard drive and reinstall. Without SH3 Commander installed yet, I was able to make a career in SH3 directly with the 30th/33rd Flotilla. So it looks like whatever problem I was having it was mine and mine alone. Thanks for the help.

12-16-06, 11:48 PM	#20
Corrupt_File Sparky Join Date: Nov 2006 Location: Canada's Western Naval Fleet Posts: 157 Downloads: 17 Uploads: 0	There doesnt seem to be Torpedo visuals when selecting them in port?

12-17-06, 07:49 AM	#22
Vermin Helmsman Join Date: Apr 2005 Posts: 106 Downloads: 39 Uploads: 0	What a fantastic mod - thanks folks! A funny thing happened to me in El- Ferrol. I had fled to the nearest neutral port to patch up my boat after a disastrous passage through the channel.... I stopped a few hundred yards off the wharf in El-Ferrol and ended the mission. My only option to end patrol was to return to base - which I clicked on.... and then suddenly I ended in Willhelmshaven! LOL Probably user error on my part but the Spanish were very helpful! :rotfl: Vermin

12-17-06, 08:26 AM	#23
The Noob The Old Man Join Date: Sep 2005 Location: de_dust2 Posts: 1,417 Downloads: 0 Uploads: 0	A bit off topic, but does the GWX Auto-Installer check the game exe files?

12-17-06, 08:40 AM	#25
hyperion2206 Ace of the Deep Join Date: Jul 2006 Location: Cologne, Germany Posts: 1,227 Downloads: 8 Uploads: 0	I installed GWX and everything is fine except that I don't have any sound! At first I could hear a bit of music but I had to turn up the volume to almost 100% and now the sound is gone completly. Do you have a clue whats wrong?

12-17-06, 11:39 AM	#27
Uber Gruber Stowaway Posts: n/a Downloads: Uploads:	Started patrol in Jan 1942....encountered 2 tankers and a med cargo SW of ireland, all flying Irish Flag. Then encountered single Medium Cargo which I sank with deck gun within 10 rounds aimed below waterline at long range......bit suprised she sank so quickly. As a manual targeting kinda guy, I really miss the slide out TDC mod that appears in NYGM 2.2.....any chance it could be added or is there a reason why not ? I ask because i'd be happy to add it myself if its compatible. Thats it so far...except the crew fatigue model, gonna have to turn that off as everyone had red eclamation marks after crossing BoB.....way to quick. Also damage model didn't deactivate at high compressions. Just to note, clean install + patch, no mods, using SH3 Com 2.7 with GWX CFG files installed. Cheers, Hans.

12-17-06, 01:20 PM	#29
bunkerratt Chief Join Date: May 2006 Location: madison wisconsin Posts: 310 Downloads: 13 Uploads: 0	ok..after uncorrupting the 1st install of gwx it seems to be stable...however..how the hell do i get the subskin to change/..i prefer fubars dark rusty 9b..i tried to load it into textures tnormal tex as before..no dice..any ideas?....