SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Silent Hunter 3 - 4 - 5 > Silent Hunter III
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 05-05-09, 05:58 AM   #1
karamazovnew
The Old Man
 
Join Date: Mar 2009
Location: Bucharest, Romania
Posts: 1,403
Downloads: 151
Uploads: 0


Default Full visual TDC Technique (for Mikhayl's ACM mod)

Hi everybody.
After many patrols using this technique I'm confident enough about it to share it with others. I haven't seen this described in any thread but I've seen many threads (I haven't seen them all of course) talking about this technique, but it was always much too complicated, described in too much detail, involving charts and wiz wheels. This is just a variation of the Fast 90 method made for Mikhayl's OLC gui version, that involves almost nothing more than the use of your sub's TDC. It can be applied to single merchants, or, at it's best, to a convoy row wipeout. It's even suited for colums of ships but the initial torpedo blasts will alert the other. I hope most of this will be new info to you. Just in case someone else described this method, I appologise and request a delete of this thread.

If the torpedo is shot at a 000 gyroangle, range is no longer important. Since the target's AOB, it's speed and our torpedo speed are all known, range will only define equivalent triangles of speeds. The lead angle can be offset to any bearing, for a more perpendicular intercept angle, but then the torpedo straight run becomes a factor. The range we input will tell the TDC how to deal with that factor. This seems to get complicated so let's just stick to 000 angle shots for a 90 degree AOB.

So we have 2 problems:
1: how do we obtain that easy 90 degree angle from 5000m away and only one sighting of the target?
2: at which bearing should the target be so that the torpedo will hit it with a 000 gyroangle?

The answer? Use the TDC. I strongly recommend using Mikhayl version of OLC interface. Unlike OLC's original gui, this one always shows the TDC settings on the periscope, even when autoupdate is turned on. Actually it was using this interface that i noticed the needles moving and came up with the idea so thanks again Mikhayl .

Step one, attain a perpendicular course:
Let's say you have just spotted a ship at bearing 325 at 8 km and you can plainly see it. Is it heading touwards you? Can you intercept it now, or do you need to overtake it? Eyeball the AOB, you don't need to be exact now. You'll get better and better at it in time, as you close in for the shot. If you nail it within 10 degrees, the ship is toast anyway. All the following green text is for this example only. I've done this example mentally, without any target in my sight. Let's say the AOB is around 30-40 degrees port(left side), so the taget is closing. Good. Can we intercept it now? let's see:

1: Turn TDC Autoupdate OFF. This will break the link between the periscope bearing and the AOB.
2: Move the periscope to the target, let's say 323 now.
3: Set the AOB to 30 port.
4: Turn TDC Autoupdate ON. Try moving the periscope and you'll see the AOB updating. Yes you already knew that but how does that help you with the 90 degree course calculation?
5: Move the periscope left (in this case) and watch the AOB update. When it hits 90 port stop the periscope and press the "=" key to set a course to that bearing. For this, case it's around the 268 bearing. What course from north? Who cares?! Congratulations, you're now on a 90 degree perpendicular course. As you get closer and see the target better u can update the AOB anytime with the steps above to nail that angle a bit better.
IMPORTANT
6: As the AOB is still linked to the old periscope bearing, not to the ship's new bearing, remember to point the periscope at 000 and set the AOB to the corresponding 90 degrees. You can do this while you're still turning to your new course.

Can you intercept the target? After u've settled on the new course check the bearing again. Let's say it's around bearing 60 now. The aim is to get as close as possible but considering that you're going underwater at 6-8 knots (or 2-3 in case of warships), the target bearing becomes very very important. 60 degrees at a long distance will surely not be enough, 70-80 degrees is a safer bet so it's better to overtake the target for a few more kilometers than close in. So where do we turn to go parallel with the target? First make sure you did the previous Step 6. Just turn the periscope (with autoupdate ON) untill the AOB becomes 180(for closing and moving away targets) and head in that direction. As long as u have that AOB dial there u can use it to close in at any angle you want, then imediatly turn perpendicular. No need to remember any angle, any course, just watch the dial while you move the periscope.

Ok, so now you're in position, the AOB is 90 degrees when the periscope is at 000. Let's say the target is at 70 degrees and at around 2500m. Great. What should his AoB be? With the target centered, look at the AOB dial. Is it still correct? It should be 20 degrees but it's more like 45 degrees now. No problem:
1: with the ship centered, turn autoupdate OFF, and update the AOB to 45 degrees.
2: turn autoupdate ON again and move the periscope untill the AOB dial shows the proper 90 degrees. In this case it should be 25 degrees. Turn to that bearing and u're set.

Now the target is at 50 degrees. Time to calculate the speed. Ship Length, chronometer and the U-Jagd tool will deal with that in less than a minute, no prop counting or map charting for us. Let's say the speed is 8.5 knots. Enter that in the TDC for now. And now, the best trick. I remember struggling to understand the Wizz wheel lead angle calculation using target speed and torpedo speed. I remember having to use only fast torpedoes because all the charts were made for a 45 knot torpedo, those where the days... bleah. Try this....

So, ship AOB = 90 port when periscope is at 000, target speed 8.5 knots. Now just make sure the autoupdate is ON. The following is just a simple example of range cancelation.

1: move the periscope to 000. the gyroangle is 343 for me.
2: turn autoupdate OFF (and don't move the periscope anymore) and play with the range dial. The gyroangle will show values of 340-343. A bit too imprecise. just turn the autoupdate ON again.
3: move periscope until gyro is 000, should be at bearing 017.
4: autoupdate OFF again and play with the range. Does it change the gyroangle? Nope. It's rock solid at 000.
What does that mean? You know it: for THAT target speed, and for THAT torpedo speed, if you fire the torpedo when the enemy captain's hat appears at 17 degrees, the torpedo will hit (or, worst case scenario, go under the captain and hit his ship instead).

A word of advice: if u're using OLC's or Mikhayl's interfaces, never ever move the periscope with the mouse when autoupdate is OFF. When u release the periscope it will change the torpedo depth (OLC) or the AOB (Mikhayl). Just stay there and wait for the target to come in sight. If u have time, you can make another speed estimate. And of course, I guess you already know that shooting gas/steam torpedoes from long ranges will lead to misses and depth charges on your sorry stern.

This combines with the mother of all hits... convoy Front Row Central.
Convoys are equally spaced and follow a specific route. The front row might not be perfectly aligned, but the ships are almost always equally spaced. Let's say we have a 4 column convoy with ships at 1 km from eachother. That means the entire width of the convoy is 3 km. put yourself at 1 km away from the closest ship (1+3=4 well within the torpedo max range of 5 Km). All stop, periscope 1 cm above the water. You're perpendicular and the convoy is moving at 8.5 knots. u;ve done all calculations and the periscope is already at the proper bearing for a 000 gyroangle. Wait for the furthest ship to cross the line.. LOS; X seconds later the second furthest ship passes it... LOS; X seconds later another one... LOS, and X second later the closest ship passes the line LOS and get the hell out of there (i always go forward to the center of the convoy, not away from it). You'll only have about one minute before the torpedoes hit (slow electrics with impact detonators ofc). All 4 torpedoes should hit at the exact same time .

What about for a column of ships. Well, it's a bit more tricky. Play around with the range dial for different gyroangles and you'll see that if the gyro is between 350-010, even for large variations of range, there's barely a degree difference. That might or might not be ok. I did hit 4 ships in a column but it was from 3000m away and the gyroangles were at 345/355/005/015. Just to be sure i did input the medium range (3000). Later I realised that the actual range was more like 3500m but who cares. The order or firing was: 1/4/3/2 so that they all get him at roughly the same time, barely 20 seconds between the first hit and the last. They were spaced like this:
1_____
____3_
_2__ 4

Last tip: Very very quick range estimate.

If you're using OLC's gui variants, there's a very fast way to estimate range. Changes in range are inverse proportional to height in degrees. All ships are between 40-60 m high. One degree equals 8000 meters. In other words:

1 degree=8000m
2 degrees=4000m (or 1 mark on Mikhayl's periscope)
4 degrees=2000m (or 2 marks on Mikhayl's periscope)
6 degrees=1500m (or 3 marks on Mikhayl's periscope)
8 degrees=1000m (or 4 marks on Mikhayl's periscope)
10 degrees=900m (copy paste...)
15 degrees="u're almost too close"

Thanks for reading, and, if you feel that this is new info to you but you find my explanation a bit too plain text, i might add some pictures later :P

EDIT: edited and renamed.

Last edited by karamazovnew; 07-28-09 at 05:12 AM.
karamazovnew is offline   Reply With Quote
Old 05-05-09, 07:03 AM   #2
Pisces
Silent Hunter
 
Join Date: Dec 2004
Location: AN9771
Posts: 4,894
Downloads: 304
Uploads: 0
Default

Good walkthrough! I too have used this 'AOB dial pointing the way' trick often. After having measured AOB with the range/AOB finder, turn periscope until AOB needle is at 180 (or 90p/stb to set up for the kill), press '-' (or was it '+', anyway: set heading to view). And then the uboat turns to a parallel course. As good as the measurement allowed.

I don't think fiddling with the rangedial to change the gyroangle will make any difference though. As long as the gyro angle is close to 0, range makes little to no difference. So it can be avoided if that is the case. The torpedos moving, or the bow being, at 90 degrees to the course of the target isn't the real requirement. It's just convenient for impact torpedos to hit their broadside with the least chance of a miss.
__________________
My site downloads: https://ricojansen.nl/downloads
Pisces is offline   Reply With Quote
Old 05-05-09, 09:00 AM   #3
karamazovnew
The Old Man
 
Join Date: Mar 2009
Location: Bucharest, Romania
Posts: 1,403
Downloads: 151
Uploads: 0


Default

Sorry, I got carried away a bit, what should've been a short post turned into a big one and a self-named "method". Sorry for that, thought i was reinventing the wheel.

Fiddling with the range dial was just to demonstrate that range doesn't matter at all. I still set it tho to a reasonable value just in case the target sees me and changes course in the last second. I have only recently started using modified interfaces so being cooked up in the periscope view deprived me of seeing the TDC. plus the only way of doing the the TDC bearing changes was to change views or move the bearing dial by hand.

Until one month ago I was still plotting the solutions and transforming relative bearings to North-bearings with the wizz wheel. Then it just hit me while I was playing SH4. The American TDC is nice but the inability to link the AOB to the periscope is a deal-breaker for me. But while moving I saw the AOB becoming perpendicular and the rusty wheels started turning in my brain.

But this should still help newcomers to the game find manual targeting a bit more "predictable".
karamazovnew is offline   Reply With Quote
Old 05-05-09, 11:47 AM   #4
Kubryk
Bosun
 
Join Date: Apr 2009
Location: Warsaw, Poland
Posts: 66
Downloads: 53
Uploads: 0
Default

Thanks for that Karamazov, it looks interesting. One question - you mentioned several mods that are required for this method to work; do you know if all those mods work with GWX 3.0?
Kubryk is offline   Reply With Quote
Old 05-05-09, 10:29 PM   #5
karamazovnew
The Old Man
 
Join Date: Mar 2009
Location: Bucharest, Romania
Posts: 1,403
Downloads: 151
Uploads: 0


Default

Of course, I use a lot of addons and the ACM V1.1.0 (Mikhayl's mod) is in the middle of them, without conflicting with any other addon. It does have a camera.dat file that will interfere with any camera mod, but from it you only need to have the Periscope zooms set to 2x/6x. I modified that file a LOT and I can't even remember from which mod I took the original. There is also a mod that gives you a dragable TDC in any screen, in case you want to keep the rest of your current interface. However this tehnique just describes what you can do with the TDC, so it works even with SH3 1.4 vanilla . It's just a trick of using the autoupdate feature to ease your work. Most of it isn't new (as I just recently found ), i just combined it all in a new package . If it gets more replies i guess i'll need to tidy it up a bit and put in photos. It would sure make life easier for all the newcomers who're browsing the plotting tehnique in their first patrol with manual firing .

The Autoupdate feature links the Periscope Bearing to the Bearing dial of the TDC which in turn is always linked to the AOB dial. Once u input a correct AOB, as long as the target and you don't change course, the sum of those 2 angles will be constant and equal to your actual intercept angle (as it actually is in real life). As long as you can see the AOB dial in the periscope view, this method works as described. If not, you still have the entire TDC in the Attack map view.

The problem with that is that instead of moving the periscope while autopdate is turned on, you must turn the bearing dial of the TDC to simulate that effect and then try to guess what that little dial is poining to, then with autoupdate still OFF move the periscope to that bearing, turn course to bearing, then autoupdate ON again , ok I'm lost) , or switch between the 2 screens a lot. This is almost similar to using the OLC interface, as it only shows the TDC settings when you switch the autoupdate off (as that's the only time you can make changes to it ).

The bonus of using these interfaces is that you never have to see that bloody notepad and the damned stadimeter again, EVER . Or identify any target for the stadimeter to work. U-jagd tools would also help a LOT in case u haven't used them yet.

Last edited by karamazovnew; 05-18-09 at 11:07 PM.
karamazovnew is offline   Reply With Quote
Old 07-05-09, 10:32 AM   #6
PL_Cmd_Jacek
Machinist's Mate
 
Join Date: Jun 2009
Location: Poland, Bedzin
Posts: 121
Downloads: 209
Uploads: 0
Default

Gentleman, this is excellent technique. I used it today to attack one of SL convoy in late 1943. Results? - 5 per 6 torpedoes hit. 33000 BRT sunk ( three ships - motorvessel, tanker and fleet tender)

Thank you for advise.

Last edited by PL_Cmd_Jacek; 07-05-09 at 10:54 AM.
PL_Cmd_Jacek is offline   Reply With Quote
Old 07-05-09, 07:34 PM   #7
karamazovnew
The Old Man
 
Join Date: Mar 2009
Location: Bucharest, Romania
Posts: 1,403
Downloads: 151
Uploads: 0


Default

My pleasure. 33k tons in one attack in 1943?!, My friend, you deserve the Knight's Cross for that
karamazovnew is offline   Reply With Quote
Old 04-02-10, 09:37 PM   #8
supposedtobeworking
XO
 
Join Date: Jul 2002
Posts: 436
Downloads: 59
Uploads: 0
Default

Does this procedure work properly for the AOB wheel in the latest OMEGU mod? I have the documentation tutorial but I can't open it since it's in WORD format.
supposedtobeworking is offline   Reply With Quote
Old 04-05-10, 08:36 AM   #9
karamazovnew
The Old Man
 
Join Date: Mar 2009
Location: Bucharest, Romania
Posts: 1,403
Downloads: 151
Uploads: 0


Default

Quote:
Originally Posted by supposedtobeworking View Post
Does this procedure work properly for the AOB wheel in the latest OMEGU mod? I have the documentation tutorial but I can't open it since it's in WORD format.
This is exactly the same technique as the one used in the KiUB tutorial. Only that ones has more pictures.
karamazovnew is offline   Reply With Quote
Old 04-05-10, 02:54 PM   #10
Canovaro
Ace of the Deep
 
Join Date: Mar 2007
Location: Netherlands
Posts: 1,062
Downloads: 34
Uploads: 0
Default

I always use straight flank shots (0 angle shots).
I use a 'torpedo bearing table' with the target speed and according bearing, so as long as you have the target's course and speed correct, it's a sure hit.
.



I hit my targets about 95% with this. I'm still surprised I seem to be the only one doing it this way. It's effective and the most simple attack to perform.

If there are multiple ships, I vary the speed of the torps just to make them go off at about the same time, so the next one will not have too much time to excellerate or drop speed.

This is about how they did it in world war one or so I heard


The 'torp bearing table' can be downloaded here as part of a collection of stuff:

http://www.subsim.com/radioroom/down...o=file&id=1487

Last edited by Canovaro; 04-05-10 at 03:07 PM.
Canovaro is offline   Reply With Quote
Old 04-06-10, 11:37 PM   #11
Sonoboy
Planesman
 
Join Date: Aug 2005
Location: United States, CA
Posts: 195
Downloads: 9
Uploads: 0
Default

arctan(targetspeed/torpspeed) = angle you need to fire at

I use a calculator for that.

A quick reference for target speeds <= 15kts:
torpedo speed - degrees/knot
30 (slow) - 1.85
40 (medium) - 1.4
44 (fast) - 1.3

It's good to use for judging how much of an error you can have for speed in your solution and still hit, or it can be used for eyeballing it if you're lazy like me.
Sonoboy is offline   Reply With Quote
Old 04-07-10, 12:42 AM   #12
pickinthebanjo
Seasoned Skipper
 
Join Date: Mar 2010
Location: Canada
Posts: 651
Downloads: 282
Uploads: 0
Default

Quote:
Originally Posted by Canovaro View Post
I always use straight flank shots (0 angle shots).
I use a 'torpedo bearing table' with the target speed and according bearing, so as long as you have the target's course and speed correct, it's a sure hit.
.



I hit my targets about 95% with this. I'm still surprised I seem to be the only one doing it this way. It's effective and the most simple attack to perform.

If there are multiple ships, I vary the speed of the torps just to make them go off at about the same time, so the next one will not have too much time to excellerate or drop speed.

This is about how they did it in world war one or so I heard


The 'torp bearing table' can be downloaded here as part of a collection of stuff:

http://www.subsim.com/radioroom/down...o=file&id=1487
I was just going over one of these tables the other night, wondering how well they worked. What I was wondering is how different ranges affect the chart, I could see a hit on a target at 1-2km but what about say 600m or 5km?
I need a way to dispose of circling warships, I can never tell the speed of them (I always guess for DD's cause I never have the time to properly check in a convoy attack)

Also I use the torpedo speeds so they all go off within afew seconds of each other, having all the tubes open really helps for this I find.
pickinthebanjo is offline   Reply With Quote
Old 04-07-10, 01:23 AM   #13
karamazovnew
The Old Man
 
Join Date: Mar 2009
Location: Bucharest, Romania
Posts: 1,403
Downloads: 151
Uploads: 0


Default

The thing is, as long as you can see the gyro dial, once you've entered speed and AOB correctly, you just need to move the periscope until the gyro shows 000. That's your LOS bearing. No need for value sheets.
karamazovnew is offline   Reply With Quote
Old 04-07-10, 02:38 AM   #14
geosub1978
Samurai Navy
 
Join Date: Oct 2006
Location: Salamis Base
Posts: 567
Downloads: 229
Uploads: 0
Default

1. For close range cyrcling DDs, if you fire at EXACT 15degrees relative (tube open), and their Aob is at that moment 80-100 degrees you will lead a 45kts torpedo in the middle of the target. It seems their speed is always the same when attack and cyrcle.

2. My tables, give the firing angle for any impact angle in steps of 10degrees, not only 90degrees for 30 and 45 kts torpedoes.

3. For a row of ships, I use to approach for a middle ship for gyro=000. For the other ships, I adjust the gyro angle=bearing diffrence for diffrences up to 20degrees, or I change my coarse accordingly.
__________________
geosub1978 is offline   Reply With Quote
Old 04-07-10, 12:11 PM   #15
Pisces
Silent Hunter
 
Join Date: Dec 2004
Location: AN9771
Posts: 4,894
Downloads: 304
Uploads: 0
Default

Quote:
Originally Posted by pickinthebanjo View Post
I was just going over one of these tables the other night, wondering how well they worked. What I was wondering is how different ranges affect the chart, I could see a hit on a target at 1-2km but what about say 600m or 5km?
They don't affect if the gyro angle is close to 0 degrees (or 180 for aft). The time the torpedo's need to move is exactly as long as the target needs to get to his doom. The only time that range matters is when the torpedo's need to turn a signigficant amount after leaving the tubes.

Quote:
I need a way to dispose of circling warships, I can never tell the speed of them (I always guess for DD's cause I never have the time to properly check in a convoy attack)

Also I use the torpedo speeds so they all go off within afew seconds of each other, having all the tubes open really helps for this I find.
Don't bother with the DDs. Try to follow the convoy trying to to plot their course and speed during the day. And see how the convoy is aranged. Only attack at evening, night or sunrise. You can get much closer. Just don't rush in allready perpendicular to their course.. Aproach them more or less at parallel course. Then speed up a bit and steer to them genthly. Then you'll slowly close up on them, but things don't go as hasty.
__________________
My site downloads: https://ricojansen.nl/downloads
Pisces is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:58 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1995- 2024 Subsim®
"Subsim" is a registered trademark, all rights reserved.