SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Silent Hunter 3 - 4 - 5 > SHIII Mods Workshop
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 07-13-06, 06:06 PM   #1
Captain Wreckless
XO
 
Captain Wreckless's Avatar
 
Join Date: Jul 2003
Location: Edmond, Oklahoma
Posts: 421
Downloads: 658
Uploads: 0
Default Radio Message font size

Is there a way to change the font size of incoming radio messages? I get 2+ page messages that I can't read because of it. I can't find a way to show next page either, if there is one.

I seem to remember someone says there was a way to do it, but I can't find it anywhere. I looked at the ingame cfg's but haven't been able to find anything.

Can someone point me to where and how to do it if it is possible? I'm using the lates Grey Wolves Mod.

Thanks.

CW
__________________
"Quando omni flunkus moritati"


United States Navy 1979-1982
"AD2" Aviation Machinists Mate 2nd Class
VT-23, HS-1, USS Carl Vinson CVN70 (Plank Owner)
NAS Kingsville, TX; NAS Jacksonville, FL; NOB Norfolk, VA
FAA Air Traffic Control Specialist, Fairbanks, AK 2000-2020 (Ret)
Captain Wreckless is offline   Reply With Quote
Old 07-14-06, 01:35 AM   #2
enaceo
XO
 
Join Date: Jul 2006
Posts: 401
Downloads: 10
Uploads: 0
Default

I don't really know if there is a possibility of changing fonts,but i think you can read those messages.I get some 2-3 page messages sometimes (i'm using NYGM) and they are split in 2 or 3 parts.First you receive the first page,then after a few minutes you get another message saying something like "message continues:blablabla".
__________________
Came back after a long time ...ahoy mates!
enaceo is offline   Reply With Quote
Old 07-14-06, 04:47 AM   #3
Reece
CINC Pacific Fleet
 
Reece's Avatar
 
Join Date: Sep 2003
Location: Down Under
Posts: 34,734
Downloads: 171
Uploads: 0
Default

I think Captain Wreckless is talking about the patrol load screen, it's ok for the start of a patrol but messes up when loading saves!

Would be nice if a smaller font could be selected so as to fit the whole message in but the problem I think is the reserved area in the save file, don't think there is a fix.
Correct Me please!
__________________

Sub captains go down with their ship!
Reece is offline   Reply With Quote
Old 07-14-06, 05:26 AM   #4
enaceo
XO
 
Join Date: Jul 2006
Posts: 401
Downloads: 10
Uploads: 0
Default

Ooooh those messages.I was talking about in-game messages.Ma bad .Theoretically there should be a .cfg somewhere that hadles that font ,there was a problem like that with Oblivion:TESIV -the in-game inventory font was huge and you could see like 4-5 items on it .Eventually a mod came out that made it smaller.
__________________
Came back after a long time ...ahoy mates!
enaceo is offline   Reply With Quote
Old 07-14-06, 08:51 AM   #5
Rolf Eschke
Lieutenant
 
Join Date: Feb 2006
Location: Germany
Posts: 265
Downloads: 60
Uploads: 0
Default

Hello!
Change the Font is very easy.Open menu_10214_768,
look at [G37 I2] change Font.Also change Font in [G37 I3] and [G37 I4],save menu_1024_768.Ready
Greats
R.Eschke
Rolf Eschke is offline   Reply With Quote
Old 07-14-06, 09:07 AM   #6
Redwine
Sea Lord
 
Join Date: Jan 2002
Location: San Martin de los Andes, Neuquen, , Argentina.
Posts: 1,962
Downloads: 10
Uploads: 0
Default

Quote:
Originally Posted by Rolf Eschke
Hello!
Change the Font is very easy.Open menu_10214_768,
look at [G37 I2] change Font.Also change Font in [G37 I3] and [G37 I4],save menu_1024_768.Ready
Greats
R.Eschke
Many thanks Rolf... !

You can change font size there, but what about to change font type ?

In axample the font used into the mission briefing ?

Can you help with this ?
Redwine is offline   Reply With Quote
Old 07-15-06, 12:34 PM   #7
Captain Wreckless
XO
 
Captain Wreckless's Avatar
 
Join Date: Jul 2003
Location: Edmond, Oklahoma
Posts: 421
Downloads: 658
Uploads: 0
Default

Quote:
Originally Posted by Reece
I think Captain Wreckless is talking about the patrol load screen, it's ok for the start of a patrol but messes up when loading saves!

Would be nice if a smaller font could be selected so as to fit the whole message in but the problem I think is the reserved area in the save file, don't think there is a fix.
Correct Me please!
Oops, should have been more clear. I started a 1939 career and headed out to my patrol zone. Enroute I received messages from HQ about conducting the war ie: do not attack UK/FR ships until instructed to, later messages allowing attacks on merchants only, etc.... These are long messages and you can see they won't fit on one page. I even had one a month into my patrol issuing redeploy orders for several U-Boats which didn't fit either.

I seem to recall somewhere that you could find the file that has these messages and can reset to a smaller font, though I haven't found it yet or I dreamed it all. :rotfl:

Thanks for the suggestions and I'll keep trying/looking. If all else fails, I'll live with it.

CW
__________________
"Quando omni flunkus moritati"


United States Navy 1979-1982
"AD2" Aviation Machinists Mate 2nd Class
VT-23, HS-1, USS Carl Vinson CVN70 (Plank Owner)
NAS Kingsville, TX; NAS Jacksonville, FL; NOB Norfolk, VA
FAA Air Traffic Control Specialist, Fairbanks, AK 2000-2020 (Ret)
Captain Wreckless is offline   Reply With Quote
Old 07-15-06, 12:36 PM   #8
Captain Wreckless
XO
 
Captain Wreckless's Avatar
 
Join Date: Jul 2003
Location: Edmond, Oklahoma
Posts: 421
Downloads: 658
Uploads: 0
Default

Quote:
Originally Posted by Redwine
Quote:
Originally Posted by Rolf Eschke
Hello!
Change the Font is very easy.Open menu_10214_768,
look at [G37 I2] change Font.Also change Font in [G37 I3] and [G37 I4],save menu_1024_768.Ready
Greats
R.Eschke
Many thanks Rolf... !

You can change font size there, but what about to change font type ?

In axample the font used into the mission briefing ?

Can you help with this ?
I think changing the font type would help also.

CW
__________________
"Quando omni flunkus moritati"


United States Navy 1979-1982
"AD2" Aviation Machinists Mate 2nd Class
VT-23, HS-1, USS Carl Vinson CVN70 (Plank Owner)
NAS Kingsville, TX; NAS Jacksonville, FL; NOB Norfolk, VA
FAA Air Traffic Control Specialist, Fairbanks, AK 2000-2020 (Ret)
Captain Wreckless is offline   Reply With Quote
Old 07-15-06, 12:49 PM   #9
Captain Wreckless
XO
 
Captain Wreckless's Avatar
 
Join Date: Jul 2003
Location: Edmond, Oklahoma
Posts: 421
Downloads: 658
Uploads: 0
Default

I think I may have found what I was looking for. When I get off work I'll test it and post back.

CW
__________________
"Quando omni flunkus moritati"


United States Navy 1979-1982
"AD2" Aviation Machinists Mate 2nd Class
VT-23, HS-1, USS Carl Vinson CVN70 (Plank Owner)
NAS Kingsville, TX; NAS Jacksonville, FL; NOB Norfolk, VA
FAA Air Traffic Control Specialist, Fairbanks, AK 2000-2020 (Ret)
Captain Wreckless is offline   Reply With Quote
Old 07-17-06, 09:59 PM   #10
Captain Wreckless
XO
 
Captain Wreckless's Avatar
 
Join Date: Jul 2003
Location: Edmond, Oklahoma
Posts: 421
Downloads: 658
Uploads: 0
Default

Quote:
Originally Posted by enaceo
I don't really know if there is a possibility of changing fonts,but i think you can read those messages.I get some 2-3 page messages sometimes (i'm using NYGM) and they are split in 2 or 3 parts.First you receive the first page,then after a few minutes you get another message saying something like "message continues:blablabla".
You are totally right! My fault. I just figured out what the problem is, a BUG in the game. I found the text file that produces the radio messages and it appears the game omits the 2nd part of a 3 part message at the beginning of the game.

The 3 part message is supposed to transmit: 09/03/39 @ 1400, 1401, & 1402. What happens is part 1 is transmitted at 1401, part 2 is missing and part 3 is transmitted at 1403.

That's what was confounding me. :rotfl:

Has this been reported over in the GW thread?

CW
__________________
"Quando omni flunkus moritati"


United States Navy 1979-1982
"AD2" Aviation Machinists Mate 2nd Class
VT-23, HS-1, USS Carl Vinson CVN70 (Plank Owner)
NAS Kingsville, TX; NAS Jacksonville, FL; NOB Norfolk, VA
FAA Air Traffic Control Specialist, Fairbanks, AK 2000-2020 (Ret)
Captain Wreckless is offline   Reply With Quote
Old 07-18-06, 10:21 PM   #11
Venatore
Admiral
 
Join Date: Apr 2005
Location: Australia:- Sydney
Posts: 2,049
Downloads: 68
Uploads: 0
Open the menu_1024_768 and go down to [G37 12] [G37 13] and [G37 14] change the Font from 10 to 8.
Venatore is offline   Reply With Quote
Old 07-18-06, 10:42 PM   #12
IronOutlaw
Loader
 
Join Date: Jan 2006
Location: Stewarts River, NSW, Australia
Posts: 82
Downloads: 17
Uploads: 0
Default Message Font Size and Style

Where is that menu_1024_768 file? I'd love to reduce the font.

I should mention that you are dealing with someone who considers what goes on behind the On/Off button as being equivalent to the unknown and arkane mysteries from the beginnings of time!

Also, I saw mention of changing the font style, is this possible, and, if it can be changed, could I use the Crappy Wehrmacht Typewriter font with Grey Wolves? It is already used in the screen just prior to the saved mission as it finishes being loaded.
__________________
Mit Kameradschaftlichen Grüßen
Kapitänleutnant Wilhelm Weiß
Unterbefehlshaber der 33te U-boot. Flot.

IronOutlaw is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:46 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.