SUBSIM Radio Room Forums - [REL] JTxE - Textenabler to merge lines in ini-Files

SUBSIM Radio Room Forums (https://www.subsim.com/radioroom/index.php)

- SH4 Mods Workshop (https://www.subsim.com/radioroom/forumdisplay.php?f=219)

- - [REL] JTxE - Textenabler to merge lines in ini-Files (https://www.subsim.com/radioroom/showthread.php?t=123521)

I couldn't get the included mini chrono mod to work right... It just displayed a greyish flashing box, no more watch. Any idea what might have went wrong? I'm going to try again without any mods enabled and see if it works then. Great tool idea, hopefully I'll get it working right.:up:

Quote:

Originally Posted by ben cg

This a great tool, thanks :)

I couldn't get the existing mini-chrono.ini mod to work (it just enlarged a square section in the middle of the chrono, probably a 1.3 thing?). After some hunting around I found some working code posted by CaptainCox in this post

I just cut his code down to the relevant zone lines and put it in an ini mod file and it appears to work fine, red target time hand and everything. Here is the text for the mini chrono.ini file for anyone who wants a 75% clock mod;

*snip!*

I hope modders make use of this great tool, theoretically we could combine bits from different interface/hud/map mods if everyone plays along :up:

Uh...those appear to be the original values :) I added them in manually, my watch appeared the same size as before (well, I got CTDs at first, but that was cause I pulled a stupid during the pasting!), so I compared my edited file against the one I was using before...values were exactly the same. I also checked out the values in the link you provided, and they're the "shrunk" ones.

are those pre patch 1.3 value's?

Quote:

Originally Posted by Metl

Since the 1.3 patch what has to be changed to down size the watch has also changed.

The values in Captain Cox's post work. I copy/pasted those values to my .ini file and my clock works like a charm. Using v1.3.

Here, corrected "70% shrinkage" values. Try it out.

Code:

Targetfile=Data\Menu\menu_1024_768.ini



[G29 I2]

Zone= 412 768 234 225 0 1 0x29000000 1.23 0 0x29020000 -1 0 -300 0



[G29 I3]

Zone= 566 596 3 3 0 1 0x2902000C 0.5 -0.5 0x29020006 -0.5 0.5 0 0



[G29 I4]

Zone= 562 686 9 138 0 1 0x2902000C 0.5 -0.5 0x2902000E -0.5 0.5 0 0



[G29 I5]

Zone= 562 686 9 138 0 1 0x2902000C 0.5 -0.5 0x29020010 -0.5 0.5 0 0



[G29 I6]

Zone= 557 681 16.5 130.5 0 1 0x2902000C 0.5 -0.5 0x29020008 -0.5 0.5 0 0



[G29 I7]

Zone= 560 692 12 147 0 1 0x2902000C 0.5 -0.5 0x29020009 -0.5 0.5 0 0



[G29 I8]

Zone= 563 567 6 45 0 1 0x2902000C 0.5 -1 0x29020011 -0.5 1 -1 11



[G29 I9]

Zone= 564 674 6 39 0 1 0x2902000C 0.5 -0.09 0x2902000F -0.5 0 0 0



[G29 I10]

Zone= 564 567 7.5 46 0 1 0x29020007 0.5 -0.5 0x29020002 -0.5 0.5 0 -7



[G29 I11]

Zone= 565 583 6 60 0 1 0x29020007 0.5 -0.5 0x29020003 -0.5 0.5 0 0



[G29 I12]

Zone= 564 573 7.5 45 0 1 0x29020007 0.5 -0.5 0x29020004 -0.5 0.5 0 0



[G29 I13]

Zone= 564 674 6 39 0 1 0x2902000F 0.5 -0.5 0x29020005 -0.5 0.5 0 0



[G29 I14]

Zone= 529 583 60 60 0 1 0x2902000C 0.5 -0.965 0x29020007 -0.5 1 1 0



[G29 I15]

Zone= 558 720 15 14 0 1 0x29020000 0.5 -0.16 0x2902000D -0.5 0 0 0



[G29 I16]

Zone= 470 692 147 147 0 1 0x29020001 0.5 -0.505 0x2902000C -0.5 0.5 0 0



[G29 I17]

Zone= 450 702 177 176 0 1 0x29020001 0.5 -1 0x2902000B -0.5 1 0 0



[G29 I18]

Zone= 450 722 177 191 0 1 0x29020000 0.5 -1 0x29020001 -0.5 1 0 0



[G29 I19]

Zone= 544 758 36 27 0 1 0x29020001 0.5 0 0x2902000A -0.5 1 0 0

Quote:

Originally Posted by DrBeast

The values in Captain Cox's post work. I copy/pasted those values to my .ini file and my clock works like a charm. Using v1.3.

Here, corrected "70% shrinkage" values. Try it out.

Thanks, careless of me to post the wrong code!

I think what happened is I had the mod installed and the .bak and .used files in the ini_Mods directory are ambiguously labelled; on examination the .bak file is what is being used in the current menu_1024_768.ini file and and the .used file is the original code.

In repentance for not double checking before I posted the chrono code :hmm: here is the ini mod code for a smaller Nav Tools from CaptainCox's original code from this mod but all are scaled to 70% (iirc one or two were at 50% and others at 70% I just made them all 70% - all credit to CaptainCox for code);

70% smaller nav tools

Code:

Targetfile=Data\Menu\menu_1024_768.ini





[G31 I16]

Zone= 20 506 112 56 0 1 0x31010001 0.1 -0.1 0x3101000A 0.5 1 0 0

Display=2;Linear

Crop 0=0.673828,0.859375,0.15625,0.078125

Crop 1=0.673828,0.774414,0.15625,0.078125

Crop 2=0.673828,0.859375,0.15625,0.078125

Crop 3=0.673828,0.774414,0.15625,0.078125

Crop 4=0.835938,0.859375,0.15625,0.078125

Crop 5=0.835938,0.774414,0.15625,0.078125

Crop 6=0.673828,0.859375,0.15625,0.078125

Crop 7=0.673828,0.774414,0.15625,0.078125



[G31 I17]

Zone= 140 236 77 168 0 1 0x31010000 0.3 -0.8 0x31010005 -0.6 0.9 6 0

Display=2;Linear 

Crop 0=0.820313,0,0.107421875,0.234375

Crop 1=0.820313,0,0.107421875,0.234375

Crop 2=0.820313,0.432617,0.107421875,0.234375

Crop 3=0.820313,0,0.107421875,0.234375



[G31 I18]

Zone= 110 230 67 157 0 1 0x31010000 0.3 -0.7 0x31010004 -1 1 0 0

Display=2;Linear 

Crop 0=0.726563,0,0.087890625,0.205078125

Crop 1=0.726563,0,0.087890625,0.205078125

Crop 2=0.726563,0.432617,0.087890625,0.205078125

Crop 3=0.726563,0,0.087890625,0.205078125



[G31 I19]

Zone= -27 273 117 115 0 1 0x31010000 0.2 -0.8 0x31010003 -1 1.1 20 0

Display=2;Linear 

Crop 0=0.475586,0,0.228515625,0.224609375

Crop 1=0.475586,0,0.228515625,0.224609375

Crop 2=0.475586,0.432617,0.228515625,0.224609375

Crop 3=0.475586,0,0.228515625,0.224609375



[G31 I20]

Zone= 8 340 28 50 0 1 0x31010000 0.08 -0.4 0x31010006 0.07 1.7 0 0

Display=2;Linear 

Crop 0=0.9375,0,0.0546875,0.09765625

Crop 1=0.9375,0,0.0546875,0.09765625

Crop 2=0.9375,0.432617,0.0546875,0.09765625

Crop 3=0.9375,0,0.0546875,0.09765625



[G31 I21]

Zone= -88 218 132 132 0 1 0x31010000 0.3 -1 0x31010002 -0.4 0.9 0 0

Display=2;Linear 

Crop 0=0.238281,0.0449219,0.21484375,0.21484375

Crop 1=0.238281,0.0449219,0.21484375,0.21484375

Crop 2=0.238281,0.477539,0.21484375,0.21484375

Crop 3=0.238281,0.0449219,0.21484375,0.21484375



[G31 I22]

Zone= -60 426 140 284.2 0 1 0x31010000 0 -1 0x31010001 -0.3 1 0 0

Display=2;Linear 

Crop 0=0,0,0.1953125,0.396484375

Crop 1=0,0,0.1953125,0.396484375

Crop 2=0,0.432617,0.1953125,0.396484375

Crop 3=0,0,0.1953125,0.396484375

Cheers, I was thinking of trying that mod out the other day. :up:

The link for this in the first post does not work.

Quote:

Originally Posted by Killjoy12

The link for this in the first post does not work.

Oh, the transferlimit of my page has been reached this month. So Arcor has closed my account for this month.
I have open an additional link on my first post.

Sorry for the trouble.

Thanks for updating the link.

Question...could this tool be used to add CaptainCox's small navigation tools? It would seem to me your tool is good for replacing existing lines but what about adding new sections of code to the INI file? Seems like that would still have to be a manual process.

Thanks

No for this version. The 2.0 will be able to do it. At the moment you should do it manually. Sorry

Okay...no worries. How's the 2.0 progress coming along?

Download Link is dead. Anybody have this?

Got a new and working download link from jimimadrid:

http://www.jimimadrid.kilu.de/SilentHunter/JTxE.exe

Quote:

Originally Posted by JoeCorrado (Post 1437719)

Got a new and working download link from jimimadrid:

http://www.jimimadrid.kilu.de/SilentHunter/JTxE.exe

This link does not work now. Download links did not work from 1st post either.
I PM'd jimimadrid asking for permission for me to upload JTxE and misc ini mods to subsim download utilities section. I have not researched yet if misc ini mods are still available somewhere.