You must be registered with this forum to download files. If
you are registered and getting this message,
then the Downloads section is experiencing heavy load volumes and has been
temporarily restricted to members
who are in the Subsim Navy (donors). Please try again later.
This mod will bring the several new UIs to SH5. Currently the list of UIs are:
- SH3 style
- SH4 style
- SH5 Enhanced
SH3 style UI consists of:
- familiar 3 dials (throttle/speed, heading/rudder, depth25/depth260).
- Officer shortcut bar with commands for officers.
- TDC. Each scope's TDC mode can be set to: no TDC, minimal dials, all dials
- Fuel, CO2, O2, and battery levels bargraph. Used to monitor levels of each. Current level displayed on bar graph.
SH4 style UI consists of:
- familiar 3 dials (throttle/speed, heading/rudder, depth25/depth260).
- TDC. Each scope's TDC mode can be set to: no TDC, minimal dials, all dials
- Fuel, CO2, O2, and battery levels bargraph. Used to monitor levels of each. Current level displayed on bar graph.
SH5 Enhanced UI consists of:
- TDC. Each scope's TDC mode can be set to: no TDC, minimal dials, all dials
- Heading bar integrated into the speed bar. Clicking the heading bar readout will reveal a heading/rudder dial. The dial is switchable from heading mode to rudder mode by clicking on the button under the dial. Clicking on the heading bar readout again will hide the dial (it retains the mode it was in when revealed again). Mousing into the heading bar readout and pressing the appropriate keys will set the ordered heading. You can press and hold the appropriate keys to keep changing the ordered heading. The appropriate keys (and all options) can be changed by editing \MODS\NewUIs_TDC_7_1_0_TheDarkWraith\data\Scripts\ Menu\TheDarkWraithUserOptions.py). Mousing out of the heading bar readout with a new ordered heading will cause this ordered heading to take effect. The dial can also be used to set the ordered heading / rudder angle. A tooltip has been integrated to be shown when you mouse into the heading bar readout. It will either display the current heading or if you have requested a new ordered heading the current ordered heading. Once within 5 degrees of the ordered heading the tooltip will start to display the current heading. The heading/rudder dial can also be cycled on/off using a hotkey. The state of the dial (rudder or heading) can be switched via hotkey also.
- Officer shortcut bar with commands for officers.
- optional integrated levels that gives the user Fuel, CO2, O2, and battery levels bargraph. Used to monitor levels of each. Current level displayed on bar graph.
Common to all UIs:
- Option to enable heading display in Binocular view
- Added skwasjer's digital clock to top right
For those UIs that utilize the familiar 3 dials:
- The dials have two states.
- The first dial has the states of: engine order telegraph and speed.
- The second dial has states of heading and rudder angle (though angle displayed on dial doesn't match rudder deflection currently. Still sorting that out).
- The third dial has states of shallow depth and deep depth.
- To change states simply click on the button below the dial.
- The dials will expand when the mouse is inside them and they will contract when mouse is outside them (like zoom in/out). Individual zoom levels can be set for throttle, speed, heading, rudder, depth260, and depth25.
- User can lock out each individual dial (and each state of the dial) from zooming.
- The animation rate of the dials expanding/contracting can also be changed.
- The dials can be customized by using a different .dds file. See the readme.txt file in \Dials.
For those UIs that utilize the TDC:
- There are four versions of the TDC included - All dials, minimal dials, spread angle only, and no TDC
- All dials will take control of the functionality of the SH5 interface for a torpoedo solution (and associated controls in the SH5 stock UI are removed).
- Minimal dials just exposes the dials not exposed by the stock SH5 UI and also uses the stock UI.
- spread angle only just adds the spread angle dial to the TDC
- No TDC removes the TDC from the mod.
- The TDC interfaces have been included on the obs periscope, attack periscope, and UZO. User has option to disable TDC on each station mentioned.
There are four versions of the TDC included - All dials, minimal dials, spread angle only, and no TDC. All dials will take control of the functionality of the SH5 interface for a torpoedo solution (and associated controls in the SH5 stock UI are removed). Minimal dials just exposes the dials not exposed by the stock SH5 UI and also uses the stock UI. Spread angle only just adds the spread angle dial to the TDC. No TDC removes the TDC from the mod. The TDC interfaces have been included on the obs periscope, attack periscope, and UZO.
xxx = Attack, Obs, or UZO
To install All dials (for each scope):
In the options file set: xxxTDCMode = TDCAllDials
To install minimal dials (for each scope):
In the options file set: xxxTDCMode = TDCMinimalDials
To install spread angle only dial (for each scope):
In the options file set: xxxTDCMode = TDCSpreadAngle
To install No TDC (for each scope):
In the options file set: xxxTDCMode = NOTDCDials
TheDarkWraith
Note to mod author:- Your mod was uploaded by Trevally. Please PM me for any edits.
You must be registered with this forum to download files. If
you are registered and getting this message,
then the Downloads section is experiencing heavy load volumes and has been
temporarily restricted to members
who are in the Subsim Navy (donors). Please try again later.
I just followed the readme-instructions: using a text-editor I went to the file
*\MODS\NewUIs_TDC_7_4_2_ByTheDarkWraith\data\Scrip ts\Menu\TheDarkWraithUserOptions.py (* is your installation path)
In line 90 you'll find the variable UIStye; I changed it from
UIStyle=SH5Enhanced to UIStyle=SH3Style
I didn't try the allowed option UIStyle=SH4Style, but the former two options worked fine, changing the GUI as expected.
While you change that file, the mod has to be disabled; you have to enable it afterwards, otherwise it won't work!
Good evening from Germany.
1st of all sorry for my rotten English.
I have a small problem with this mod. I can´t enable the the 3 SHIII instrument panels. Nor with the compass mod or as stand alone version.
Game is patched to 1.2. Mod Enabler is Vers.2.6.0.157. OS is win8.1.
All other mods from 7_4_2 are running,exept compass,rudder and depth.
I am a bit despaired. Any suggestion?
THX for taking the trouble.
Rgds
Heiko
Question though.... I've been getting a LOT of BDU radio traffic and I'm not sure what's atmosphere and what is actually linked in to the game.
Two examples:
While doing the Eastern British Coastal Waters mission I received a radio message (on or about December 27th 1939) saying that all u-boats should now target Greek Ships but to remain unobserved. I'd spotted a few Greek Ships earlier and they were green. But I've not seen one since. Will they now appear as red and ARE they legit targets?
I just requested the South Western Approaches mission (it's Feb 1940) and got the sub mission of taking a spy to Liverpool. I navigated as far as the English Channel (just North of Cherbourg) and I received a radio message addressed to my U-Boat number saying "Return to Base." Is this just random atmospheric messaging or is it tied into something else?
Sometime in Early February 1940 I got a message saying that a "merchant" ship called Thalia docked in Cadiz Harbor in Spain (Down near Gibraltar) Apparently it's been implemented in game as a resupply ship which appears to have fuel and torpedoes. The nav map does show a friendly presence down there but I've not actually gotten down there yet to check it out.
None of these is reflected in my Captain's log, just in the radio log.