CTD when getting close to port (Lorient)

Cthulhus · 04-16-16, 08:17 AM

Sorry

To be deleted please, found my problem !

Thanks

Cthulhus · 04-16-16, 08:44 AM

ps : My problem was that I change some settings on the Nvidia Control Panel when I was on sea.

By starting a new campaign, I still got the CTD... So I got the link with my previous change on the Nvidia Control Center.

That should help some ppl here maybe?

vdr1981 · 04-16-16, 10:07 AM

Quote:

Originally Posted by Cthulhus

ps : My problem was that I change some settings on the Nvidia Control Panel when I was on sea.

By starting a new campaign, I still got the CTD... So I got the link with my previous change on the Nvidia Control Center.

That should help some ppl here maybe?

Hm...That's interesting...

What changes did you make in NVCP?
Also, which mods did you use?

Cthulhus · 04-16-16, 10:20 AM

The mods are The Wolves of Steel 1.05 without the 09 patches. (Now, the 09 patches are applied)

I don't really know what was the changes on the Nvidia's setting panel. Just reset everything.

If you are interesting, I can try to reproduce the problem and check what was the problem?

fitzcarraldo · 04-16-16, 10:30 AM

Quote:

Originally Posted by vdr1981

Hm...That's interesting...

What changes did you make in NVCP?
Also, which mods did you use?

I had some problems with Nvidia Inspector with the Ambient Occlusion settings. I disabled it and no problems now.

I leave the AA as apliccation managed. It´s very good for me.

Regards.

Fitzcarraldo

Cthulhus · 04-16-16, 10:42 AM

Yes, indeed, and the results was not really better... So...

vdr1981 · 04-16-16, 10:49 AM

Quote:

The mods are The Wolves of Steel 1.05 without the 09 patches. (Now, the 09 patches are applied)

No any additional mods? Sub flags or some additional interior mods ?

Quote:

If you are interesting, I can try to reproduce the problem and check what was the problem?

That would be really useful because CTDs when approaching the area with high traffic is quite common in heavily modded SH5 but real cause is still illusive and it can not be connected with the specific mod.

Cthulhus · 04-16-16, 11:14 AM

Quote:

Originally Posted by vdr1981

No any additional mods? Sub flags or some additional interior mods ?

Sub flags isn't already added on The Wolves of Steel 1.05 for Type7C and 7C41 ? I can read that on the .eqp files for each sub (and I don't add them by myself). So that why I didn't install Sub flags mods.

I already knew that touching mode like Sub flags or some additional interior mods could make CTD or sever issues with savegames.

The big deal with the mega mod is that the game is stable. Install hand by hand make no sens for me.

Now, I'm thinking... I have another CTD/save game corrupt problem. The problem was (with still only The Wolves of Steel), after sinking a marchant ship, the savegame become not loadable again.. (Black Screen and game not responding) Probably due to my changes on Nvidia setting panel?

That would be really useful because CTDs when approaching the area with high traffic is quite common in heavily modded SH5 but real cause is still illusive and it can not be connected with the specific mod.

Cthulhus · 04-16-16, 01:29 PM

Please find bellow my settings on the Nvidia panel settings.

Not sure if it was exactly that, but I think it is.

http://dream-space.fr/Nvidia01.JPG

http://dream-space.fr/Nvidia02.JPG

And I don't know which setting make the game CTD. Any idea?

maillemaker · 04-26-16, 02:07 PM

It's a known issue with Wolves of Steel that you are supposed to save and exit whenever you get within like 200km of port.

Steve

fitzcarraldo · 04-26-16, 09:48 PM

Quote:

Originally Posted by Cthulhus

Please find bellow my settings on the Nvidia panel settings.

Not sure if it was exactly that, but I think it is.

http://dream-space.fr/Nvidia01.JPG

http://dream-space.fr/Nvidia02.JPG

And I don't know which setting make the game CTD. Any idea?

In my actual installation I don't touch anything in Nvidia Control Panel or Inspector. Only I set the graphics options from the game (all full) and I obtain excellent graphics results. It seems SH5 don't like Nvidia GCs. But I can't tell you if the Nvidia settings are the cause of your savegames problems. I don't have your CTD problems sinking ships and saving games.

Best regards.

Fitzcarraldo

Subwolf · 04-27-16, 03:34 PM

I never have any CTDs when entering ports. In fact with TWoS it works better then before when SH5 froze for a few secs, probably to load the scenery. Now that issue is gone, and ports are busy again.

But I'm running SH5 on a new rig maxed out on RAM. I'm sure it helps having a lot of memory.

THE_MASK · 04-27-16, 04:17 PM

sobers mega mod is completely stable using Wos campaign . Entered Lorient twice now with no ctds .
I have a R9 270 graphics card with 4 gig of memory .
These big mega mods need a good graphics card imo .
170 saves and counting .
OT , if my windows phone was this stable I would be happy .

04-16-16, 08:17 AM	#1
Cthulhus Planesman Join Date: Jan 2002 Location: Bordeaux, France Posts: 191 Downloads: 136 Uploads: 0	CTD when getting close to port (Lorient) Sorry To be deleted please, found my problem ! Thanks __________________ Xavier Jehl - Bordeaux Last edited by Cthulhus; 04-16-16 at 08:40 AM.

04-16-16, 08:44 AM	#2
Cthulhus Planesman Join Date: Jan 2002 Location: Bordeaux, France Posts: 191 Downloads: 136 Uploads: 0	ps : My problem was that I change some settings on the Nvidia Control Panel when I was on sea. By starting a new campaign, I still got the CTD... So I got the link with my previous change on the Nvidia Control Center. That should help some ppl here maybe? __________________ Xavier Jehl - Bordeaux

04-16-16, 10:20 AM	#4
Cthulhus Planesman Join Date: Jan 2002 Location: Bordeaux, France Posts: 191 Downloads: 136 Uploads: 0	The mods are The Wolves of Steel 1.05 without the 09 patches. (Now, the 09 patches are applied) I don't really know what was the changes on the Nvidia's setting panel. Just reset everything. If you are interesting, I can try to reproduce the problem and check what was the problem? __________________ Xavier Jehl - Bordeaux

04-16-16, 10:42 AM	#6
Cthulhus Planesman Join Date: Jan 2002 Location: Bordeaux, France Posts: 191 Downloads: 136 Uploads: 0	Yes, indeed, and the results was not really better... So... __________________ Xavier Jehl - Bordeaux

04-16-16, 01:29 PM	#9
Cthulhus Planesman Join Date: Jan 2002 Location: Bordeaux, France Posts: 191 Downloads: 136 Uploads: 0	Please find bellow my settings on the Nvidia panel settings. Not sure if it was exactly that, but I think it is. http://dream-space.fr/Nvidia01.JPG http://dream-space.fr/Nvidia02.JPG And I don't know which setting make the game CTD. Any idea? __________________ Xavier Jehl - Bordeaux

04-26-16, 02:07 PM	#10
maillemaker Sea Lord Join Date: Apr 2007 Posts: 1,639 Downloads: 75 Uploads: 0	It's a known issue with Wolves of Steel that you are supposed to save and exit whenever you get within like 200km of port. Steve

04-27-16, 03:34 PM	#12
Subwolf Sonar Guy Join Date: Oct 2006 Location: USA/Norway Posts: 394 Downloads: 30 Uploads: 0	I never have any CTDs when entering ports. In fact with TWoS it works better then before when SH5 froze for a few secs, probably to load the scenery. Now that issue is gone, and ports are busy again. But I'm running SH5 on a new rig maxed out on RAM. I'm sure it helps having a lot of memory.

04-27-16, 04:17 PM	#13
THE_MASK Ace of the deep . Join Date: Jan 2006 Posts: 9,226 Downloads: 901 Uploads: 73	sobers mega mod is completely stable using Wos campaign . Entered Lorient twice now with no ctds . I have a R9 270 graphics card with 4 gig of memory . These big mega mods need a good graphics card imo . 170 saves and counting . OT , if my windows phone was this stable I would be happy .